Reconstruction of Late-Quaternary sea- and lake-level changes in a tectonically active marginal basin using seismic stratigraphy: The Gulf of Cariaco,NE Venezuela

The Gulf of Cariaco is a marginal basin located between the Cariaco Basin and the Paria Gulf, offshore NE Venezuela, along a system of active right-lateral strike-slip faults. It is connected to the Caribbean Sea via a shallow 58-m-deep sill implying that the gulf was disconnected from the global ocean during eustatic lowstands. A dense grid of high-resolution reflection seismic profiles has been used to determine the overall tectonic structure of the gulf and to establish the seismic stratigraphy of its sedimentary infill. Six unconformity-bounded seismic–stratigraphic units were identified in the upper ~ 200 m of the sedimentary infill. Detailed seismic–stratigraphic and seismic-facies analysis allowed defining a series of sedimentary features that can be used as indicators of past sea or lake level in the Gulf of Cariaco: i) delta offlap breaks, ii) evaporites, and iii) erosional unconformities. Using accurate measurements of these various indicators at several locations in the gulf and a simple total subsidence model, a relative sea/lake-level history encompassing the last 130 kyr could be reconstructed. In periods of connection with the open ocean, reconstructed relative sea level correlates well with eustatic sea level. In times of disconnection, distinct lake-level fluctuations occurred, which sometimes resulted in total dessication of the gulf. Lake-level fluctuations appear to correlate with major Heinrich Events, stadials and interstadials. MIS 4, the LGM and the Younger Dryas were thus identified in the Gulf of Cariaco sedimentary record. The last reconnection to the Caribbean Sea occurred during MWP1b (around 11.5 kyr). The very good fit of the Cariaco sea/lake-level curve with the eustatic sea-level curves (both in terms of amplitude and of timing) underscores potential for future paleoclimate research of the sedimentary record contained in this marginal basin, despite its active tectonic setting.     

Use of inhibitors for coastal bacteria and phytoplankton: Application to nitrogen uptake measurement

For several decades, prokaryotic and eukaryotic inhibitors have been used to exclude bacteria from microalgal cultures and for investigating prey-predator relationships. Recently there has been considerable interest in using specific inhibitors for studying the interactions between bacteria and phytoplankton, by selective repression of either organism’s activity. The effectiveness of chemical inhibitors must be tested before applying them to natural communities to partition metabolic activities between functional groups. Six different antibiotics selected from the most commonly reported in the literature were tested, at concentrations varying from 12.5 to 100 mg L⁻¹, for their effect on bacterial growth and functional diversity of natural communities from Mediterranean coastal waters. Penicillin and streptomycin each at a final concentration of 100 mg L⁻¹ significantly reduced bacterial growth within 2 h. There was a greater impact on bacterial functional diversity when both antibiotics were mixed together. This mixture did not have any significant effect on the growth of selected cultured phytoplankton strains, whereas the eukaryote inhibitor cycloheximide at 100 mg L⁻¹ reduced growth within 2 h of incubation. The penicillin–streptomycin mixture and cycloheximide alone successfully partitioned NH₄⁺ and NO₃⁻ uptake between bacteria and phytoplankton bi-weekly sampled in a coastal lagoon in Autumn, where bacterial contribution to total NH₄⁺ and NO₃⁻ uptake averaged 46 and 41%, respectively. The use of specific inhibitors may be a valuable method for studying interactions, such as competition and mutualism, or lack of interaction between the different components of microbial communities and could be used to study their relative importance in biogeochemical fluxes.     

Vegetative reproduction by multicellular propagules in Rhodophyta: an overview

This paper deals with vegetative reproduction by multicellular propagules in Rhodophyta. An extensive examination of the relevant literature shows that this phenomenon in Rhodophyta is not well known. A propagule is here defined as a vegetative multicellular structure which spontaneously detaches from the parent thallus and gives rise to a new individual. The origin and morphological features of multicellular propagules are examined in the various known propagule‐forming species. The importance of multicellular propagules as both overwintering and resting organs and as a taxonomic feature is also shown. Their role in increasing local populations and/or for long‐distance dispersal is discussed. The relative abundance of vegetative reproduction by multicellular propagules versus sexual reproduction, as well as the advantages of this additional mode of reproduction, are shown and discussed. The production of multicellular propagules may contribute to the capacity of species to increase populations, to weather unpredictable environmental changes, to survive in conditions that would be lethal for entire thalli, and to reach new habitats. As resting organs, they may also be responsible for long‐distance dispersal and may account for the introduction of some alien species. Accordingly, propagule‐forming species are probably more competitive than taxa that do not produce such propagules. These considerations should be taken into account in future studies of the biology, ecology and demography of Rhodophyta.     

A multiscale electrical survey of a lateritic soil system in the rain forest of Cameroon

Resistivity investigations were carried out on an elementary watershed in SW Cameroon, firstly to assess the applicability of direct-current (DC) resistivity methods to solve various pedological problems in intertropical regions, and subsequently to determine the relationships between electrical resistivities and pedological properties of lateritic soil systems. The survey included measurements in pits with a small Wenner fixed-spacing array (SWA), vertical electrical soundings (VES) and vertical electrical “quick soundings” (VEQS) both using the Schlumberger configuration. The VES data were interpreted using a conventional multilayer inversion program to obtain best-fit models. Constraints to the interpretation of these data were provided by SWA and pedological information from existing observation pits. The results of the interpretation reveal five distinct geoelectrical layers overlying a resistive bedrock. The first is a thin organo-mineral upper layer with low resistivities in the range 250–450 Ωm. The second layer corresponds to micro-aggregated clayey materials and is more resistive (1300–1800 Ωm). The third represents the main part of ferruginous materials and is even more resistive (2000–4500 Ωm). The fourth corresponds to unsaturated saprolite and the last to saturated saprolite (ground water) with resistivities ranging from 800 to 1500 Ωm and from 150 to 250 Ωm, respectively. Estimates of soil volumes for the entire study area were obtained from VEQS interpretations. Most of the soil cover corresponds to saprolite (74%, being saturated by ground water), while topsoil and ferruginous materials represent 14 and 12%, respectively. Finally, geophysical results based upon 1-D inversion provide a satisfactory approximation of the various lateritic components' 3-D geometry over the watershed. The study provides original quantitative results concerning the behaviour of intertropical soil systems as well as some geomorphological keys for soil mapping at a regional scale.     

Quantitative Imaging of Stable Isotopes by Ion Microprobe

A new analytical procedure has been developed to measure oxygen isotopic ratios and, more generally, stable isotopic ratios in microparticles with a few % precision. This procedure uses ion microprobe quantitative imaging with a scanning microbeam. In this mode, ion images are acquired on the electron multiplier. Image processing allows extraction of areas of interest from the whole image and computation of isotopic ratios in the selected areas. The accuracy of this method has been tested for the analysis of the 18O/16O ratio in quartz and magnetite reference samples powdered to a grain size of 2-5 μm. A detailed study of the instrumental mass fractionation allowed an understanding of differences between classical spot analysis and scanning ion imaging, and showed that fractionation effects were related to grain topography for microparticle analysis, and to image processing or to secondary optical settings for ion imaging. The precision obtained for the measurement of ä18O was 3% for grains having a diameter of 2 μm.     

Experimental study of clinopyroxenite partial melting and the origin of ultra-calcic melt inclusions

Ultra-calcic melt inclusions (UCMI: CaO>13.5 wt% and/or CaO/Al₂O₃>0.9) are magnesian and near-primary liquids trapped in volcanic phenocrysts from mid-ocean ridges, arcs, back-arcs, and ocean islands. UCMI can be subdivided into two classes based on tectonic association and degree of silica saturation: those from arcs are nepheline normative and those from all other localities (silicic UCMI) are hypersthene normative. Silicic UCMI share a number of common features, including primitive host minerals, low alkali contents, and variable ratios of K₂O/TiO₂ ranging to high values. Their compositions are not easily derived by partial melting of mantle lherzolite. Accordingly, we have performed a series of partial melting experiments on three clinopyroxenite compositions at 1.0 to 2.0 GPa to investigate the role of partial melting of clinopyroxene-rich lithologies in silicic UCMI genesis. Estimated solidus temperatures for all three compositions are similar to those of normal peridotites, but 1.0 GPa isobaric melt productivities are higher for clinopyroxenite than for peridotite. High degree partial melts of the clinopyroxenites are ultra-calcic and have similarities to silicic UCMI, but the experiments produce ultra-calcic liquids only at melt fractions greater than 30% and temperatures higher than 1,350 °C at 1.0 GPa. Such temperatures are higher than those likely to be prevailing beneath normal mid-ocean ridges, which suggests that some or all silicic UCMI may originate by a process other than simple partial melting of clinopyroxene-rich lithologies. We consider a possible role for partial melting of depleted harzburgite in the genesis of silicic UCMI.     

The groundwater vulnerability map for the Flemish region: its principles and uses

Fobe, B. and Goossens, M., 1990. The groundwater vulnerability map for the Flemish region: its principles and uses. Eng. Geol., 29: 355–363.

The vulnerability map of the groundwater for the Flemish region demonstrates the possible risk for contamination of the groundwater in the upper aquifer of economical value. The map was ordered by the Flemish government and distributed among the people working in the environmental sector. The vulnerability map, in scale 1/100,000, is based on static factors, like the lithology of the aquifer and its possible coverlayers and the depth of the water table. The map will serve as a tool for proper management of the groundwater. Because of its smaller scale, the document will be used to determine areas where particular regulations and actions for the protection of groundwater are necessary.

Some of the data presented by the map suggest a safer situation than actually present. This is because the compilation followed strictly the principles of the legend. In the future, care should be taken to avoid such ambiguous situations on a map that is available for the public.

Plans exist to start with the compilation of dynamic vulnerability maps. One experimental project is already finished. This study and other recent scientific research gave experience about the influence of topography on the recharge of groundwater. It will be necessary to review the risk of groundwater contamination in some of the areas on the vulnerability map, especially in sandy hill ridges.     

A systematic investigation of optimal carrier-phase combinations for modernized triple-frequency GPS

The upcoming modernization of the GPS signals will allow for measurements on an additional third frequency L5 located at 1176.45 MHz. To take advantage of carrier-phase measurements on this new signal, the strategies for integer ambiguity resolution, required for centimeter-level accuracy, may need to be revised. The Least-squares Ambiguity Decorrelation Adjustment method remains perhaps the most powerful tool for finding the best combinations based on a complete decorrelation of the variance–covariance matrix related to the ambiguities. However, the computational load of that method plus the opportunity to comprehensively study the interaction of multiple frequencies suggest a reconsideration of approaches using predefined combinations between frequencies is not out of place. In this paper a systematic investigation is made of all possible triple-frequency geometry-free carrier-phase combinations which retain the integer nature of the ambiguities. The concept of the lane-number is presented to unambiguously describe the wavelength of a particular combination. The propagation of the observation noise and of the ionospheric bias on these combinations is presented. These noise and ionospheric amplification factors are analysed with respect to the resulting wavelength, in an effort to highlight optimal combinations characterized by a long wavelength, low noise and limited ionospheric impact.