The Ctenophore,Beroe ovata Bruguière, 1789 – the New Invader in the Ecosystem of the Caspian Sea

Oceanology - In November 2020, the invasive ctenophore Beroe ovata Bruguière, 1789 was recorded in samples of gelatinous zooplankton from the northern and central parts of the Caspian Sea. The...     

On Termodynamics of Kolmogorov’s Scaling in Turbulence

Izvestiya, Atmospheric and Oceanic Physics - The model balance equation of turbulence is represented in the form of the first law of thermodynamics. The forms for entropy are derived with an...     

The anatomy of a disaster, an overview of Hurricane Katrina and New Orleans

Hurricane Katrina created the one of the worst natural disaster in the history of the United States, resulting in over 1600 fatalities and $30B in direct economic losses in southern Louisiana. The Louisiana and Mississippi coastlines experienced the highest surge level recorded in North America and Katrina-generated waves in the Gulf of Mexico that equaled the highest previously measured by NOAA buoys. What happened in New Orleans epitomizes the risk of living below sea level in a coastal city, depending on structures that were the result of considerable compromise and piecemeal funding and construction. The Interagency Performance Evaluation Task Force was established to examine the performance of the New Orleans and southeast Louisiana hurricane protection system and provide real-time input to the repairs and rebuilding of the system. In addition to this atypical just-in-time forensic analysis, the task force examined the risk of living in New Orleans prior to and following the repairs to the hurricane protection system. Much of the forensic analysis depended on modeling and simulation of hurricane surge and waves. With virtually all measurement instruments swept away by Katrina, only models and high-water marks were available to recreate the conditions that the structures experienced during the storm. Because of the complexities of the region and the processes involved, simulation of hurricane surge and waves required many fresh ideas and new approaches and these topics, along with new concepts for future planning and design, are the focus of this special issue. Yet, the need to influence the repair and rebuilding of the damaged structures prior to the next hurricane season (roughly 9 months) dictated using existing computational tools that were ready to go. The same modeling and simulation approach was put to work to define the surge and wave hazard New Orleans faces for the future. To put this important body of work in context, this paper provides a broad overview of the entire scope of work of the task force and summarizes its principal findings.     

Wave-like aquatic propulsion of mono-hull marine vessels

The present paper describes results of the experimental investigation of a small-scale mono-hull model boat propelled by a localised flexural wave propagating along the plate of finite width forming the boat's keel. Forward propulsion of the boat was achieved through flexural wave propagation in the opposite direction, which is similar to the aquatic propulsion used in nature by stingrays. The model boat under consideration underwent a series of tests both in a Perspex water tank and in an experimental pool. In particular, the forward velocity of the boat has been measured for different frequencies and amplitudes of the flexural wave. The highest velocity achieved was 32 cm/s. The thrust and propulsive efficiency have been measured as well. The obtained value of the propulsive efficiency in the optimum regime was 51%. This indicates that the efficiency of this type of aquatic propulsion is comparable to that of dolphins and sharks (around 75%) and to that of a traditional propeller (around 70%). In contrast with a propeller though, the wave-like aquatic propulsion has the following advantages: it does not generate underwater noise and it is safe for people and marine animals.     

Control of Aptian palaeobathymetry on turbidite distribution in the Buchan Graben,Outer Moray Firth,Central North Sea

It is widely recognised that palaeobathymetry is a key control on the distribution of turbidite deposits. Thus, the utilisation of palaeobathymetric surfaces as an input for numerical turbidity current modelling offers a potentially powerful method to predict the distribution of deep marine sands in ancient (subsurface or outcrop) successions. Such an approach has been tested on an Aptian turbidite deposit from the Buchan Graben, UK Central North Sea, where modelled sand distributions could be quality controlled against available well data.     

Structurally controlled hydrothermal dolomites in Albian carbonates of the Asón valley,Basque Cantabrian Basin,Northern Spain

Shallow marine carbonate sedimentation dominated during the Albian in the western part of the Basque Cantabrian Basin in Northern Spain, forming the large Ramales Platform. This platform originated on a less subsiding tectonic block facing deeper and more subsiding areas to the south and east, which were created by tectonic activity in the Basin. Fracture-related hydrothermal dolomites hosted in these Albian carbonates are well exposed in the Asón valley area. Mapping in the studied area revealed several dolomite bodies related to main faults that cut the stratification almost at right angles. The bodies show a vertical development along fault-strike up to 900 m thick from which kilometre-scale branches expand following the stratification. Dolomitization is pervasive and independent of the limestone facies. Main dolomite facies are fine replacive, sucrosic and saddle. Petrography, C, O and Sr isotopes and fluid-inclusion analysis support a polyphase hydrothermal dolomitization at fluid temperatures between 75 °C and 240 °C and highly variable salinity of up to 22 wt.% NaCl. Fine dolomite replaced limestone first and then, sucrosic and saddle dolomites replaced part of the first dolomite and cemented newly created fracture porosity together with different calcite cements. Zebra dolomites and hydroclastic breccias are products of this later stage. Burial analysis of the host rock supports maximum burial temperatures of 80 °C and intense tectonic activity from the Albian to Turonian with a latest Albian peak subsidence. Albian stretching of the crust and subsequent ascent of the isotherms in the area is suggested to have produced sufficient heat to the dolomitizing fluids. The structural analysis indicates a strong transtensional tectonic activity in the studied area during Albian to Turonian time with the creation of an overstep between W–E trending and N–S trending faults. Fluids moved from subsiding areas to fractured uplifted parts of the Ramales Platform, enhanced by diapiric activity.     

Reproductive cues in Panulirus ornatus

Two experiments were performed to assess the effect of photoperiod and temperature on spawning of Panulirus ornatus. In experiment 1, sexually mature lobsters taken from the wild during summer were held at one of two photoperiods, winter (13 Light: 11 Dark) and summer (14.5 Light:9.5 Dark). Additionally, lobsters were also exposed to either summer (29°C) or winter (24°C) average water temperatures. Spawning was significantly greater when animals were exposed to summer photoperiod than to winter photoperiod, irrespective of temperature. Although a higher percentage of lobsters spawned when placed under a higher temperature, this trend was not statistically significant. In experiment 2, sexually mature lobsters were taken from the wild during winter and exposed to the same two photoperiods as in experiment 1, at a summer equivalent temperature of 29°C. Breeding started earlier and was more successful at the summer photoperiod. Time to first breeding was 17 weeks after exposure to summer photoperiod, compared with less than 1 week in experiment 1, and did not occur until individuals had moulted. Moulting occurred in 81% of lobsters, primarily after an increase in temperature to 29°C. The time between moulting and mating was varied and there was no significant difference in moult frequency between the two experimental photoperiods. After the lobsters had moulted, breeding success was reached earlier if photoperiod was lengthened. Results suggest photoperiod is the primary cue for the onset of gonad maturity and mating activity, with temperature playing a less important role. Physiological rest and possibly a moult may be required between breeding seasons before spawning can occur. Furthermore, temperature may be an important cue for pre‐reproduction moulting.     

Movement patterns of individual migrating western rock lobster,Panulirus cygnus,in Western Australia

Abstract

Migrating and pre‐migrating western rock lobster Panulirus cygnus were tagged with datastorage tags that recorded temperature and pressure, which was converted to depth (Pressure (kPa) — surface pressure (kPa)/10)) at Dongara and Jurien Bay in Western Australia between December 2005 and December 2007. All lobsters were fitted with tag flotation devices, and returns were made by either commercial fishers or beachcombers who located detached tags. A total of 135 lobsters were released with “backpack” flotation tags, but only 84 (62.2%) of the backpacks carried data‐storage tags. Depths of release ranged from 5 to 113 m. Of the tagged lobsters released, commercial fishers recaptured 52 (38.5%), whereas 11 tags (8.1%) were found by beachcombers. At least 33%, and possibly up to 63%, of animals identified by their pale coloration as pre‐migrating individuals, failed to migrate. Those that did migrate (n = 11) were at liberty from 1 to 94 days and showed generally similar movement patterns in that they migrated only at night from darkness (after 2000 h) until after moonrise. However, their movement patterns were less constrained by the rising of the moon in deep water. Only 27% migrated nightly, compared with 73% that skipped migrating on one or more nights, to restart some days later. This latter proportion would likely have been considerably greater, but some migrating animals were only at large for short periods before recapture, and therefore had little time to show any variation to the nocturnal migration pattern. Individual speeds of migration during periods of activity were estimated for nine lobsters as 0.20 to 0.68 km h^?1, with a mean speed of 0.44 km h^?1, or 7.4 m min^?1. Improved knowledge of daily movement patterns resulting from this study provides a potentially important input into technological improvements in bait and pot design.     

Lobster trap impact on coral reefs: Effects of wind‐driven trap movement

Commercial fishers report finding their lobster traps often great distances from their original location following major hurricanes. But traps also move during lesser wind events, such as during winter cold fronts. To assess trap impact on coral communities following winter storms, lobster traps were placed in hardbottom and reef habitats commonly used by commercial fishers in the Florida Keys, United States. Trap movement, percentage benthic faunal cover, and benthic faunal damage were assessed after 26 wind events occuring over three winters. Traps moved when storms with sustained winds greater than 15 knots (27.8 km/h) persisted for more than 2 days. Winter storms above this threshold moved buoyed traps a mean (±SE) distance of 3.63 ± 0.62 m, 3.21 ± 0.36 m, and 0.73 ± 0.15 m per trap and affected a mean area of 4.66 ± 0.76 m², 2.88 ± 0.29 m², and 1.06 ± 0.17 m², per trap at 4‐m, 8‐m, and 12‐m depths, respectively. Unbuoyed traps, simulating derelict traps, moved a mean distance of 0.43 ± 0.08 m and 0.44 ± 0.02 m, and affected a mean area of 0.77 ± 0.06 m² and 0.90 ± 0.08 m² per trap at 4‐m and 8‐m depths, respectively. Injuries caused by trap movement included scraped, fragmented, and dislodged sessile fauna, resulting in significant damage to stony coral, octocoral, and sponges. Overall, sessile fauna cover along the trap movement path was reduced from 45% to 31%, 51% to 41%, and 41% to 35% at the 4‐m, 8‐m, and 12‐m sites, respectively. Because of the large numbers of traps deployed and reported lost each season, damage to sessile fauna and loss of benthic faunal cover caused by traps needs to be considered to effectively protect coral reefs and manage essential fishery habitat in the future.     

Tidal Effects on Determining a Point at the Bottom of the Sea by Combining GPS and Sonar Observations

This paper discusses tidal effects on an observation scheme to determine a point at the bottom of the sea by combining GPS and Sonar observations. For the purpose, three kinds of Earth tides are introduced (i.e., the crust tide, the equipotential surface point (ocean depth) tide, and the geoid tide). The corresponding mathematical expressions are derived to demonstrate the tidal effects on GPS and Sonar observations. The relations between the Earth tides are also discussed. Theoretical results imply a very interesting conclusion, namely that, for a local area, the static position of a point at the bottom of sea can be obtained by the dynamic observations without any tidal correction. Actually, the tidal effects cancel each other in the mentioned observation scheme. It therefore indicates that the observation scheme is free of tidal effects. Furthermore, we learned that the divergence caused by any error source on ocean surface is canceled and does not affect the final results. Therefore, to determine the position of a point at the bottom of sea, we need not consider any tidal effects.