Über Sedimentbildung am Meeresboden

Ohne Zusammenfassung     

Wesen,Ursachen und Arten der Schichtung

Ohne Zusammenfassung     

Geothermal Characterization of the St. Lawrence Lowlands Sedimentary Basin,Québec,Canada

Defining temperature at depth to identify geothermal resources relies on the evaluation of the Earth heat flow based on equilibrium temperature measurements as well as thermal conductivity and heat generation rate assessment. Such high-quality geothermal data can be sparse over the region of interest. This is the case of the St. Lawrence Lowlands sedimentary basin covering 20,000 km² to the south of Québec, Canada, and enclosing only three wells up to a depth of 500 m with equilibrium heat flow measurements. However, more than 250 oil and gas exploration wells have been drilled in this area, providing for this study (parce que c'est 93 sinon) 81 locations with bottom-hole temperature up to a depth of 4300 m, however, not at equilibrium. Analyzing these data with respect to the deep geothermal resource potential of this sedimentary basin requires evaluating the thermal conductivity and heat generation rate of its geological units to properly extrapolate temperature downward. This was done by compiling literature and recent thermal conductivity measurements in outcrop and core samples as well as new heat generation rate estimates from spectral gamma ray logs to establish a first thermal assessment of geological units deep down into the basin. The mean thermal conductivity of the thermal units varies from 2.5 to 6.3 W/m·K, with peak values in the basal sandstones, while the heat generation rate varies from 1.6 to 0.3 µW/m³, decreasing from the upper caprocks toward the base of the sequence. After correcting the bottom-hole temperatures for drilling disturbance with the Harrison correction and subsequently for paleoclimate variations, results indicate a mean geothermal gradient of 23.1 °C/km, varying from 14 to 40 °C/km. Evaluating the basin thermal state from oil and gas data is a significant challenge facilitated by an understanding of its thermal properties.     

Identifying Groundwater Potential in Crystalline Basement Rocks Using Remote Sensing and Electromagnetic Sounding Techniques in Central Western Mozambique

Exploring for groundwater in crystalline rocks in semiarid areas is a challenge because of their complex hydrogeology and low potential yields. An integrated approach was applied in central western Mozambique, in an area covered by Precambrian crystalline basement rocks. The approach combined a digital elevation model (DEM), remote sensing, and a ground-based geophysical survey. The aim was to identify groundwater zones with high potential and to identify geological structures controlling that potential. Lineaments were extracted from the DEM that had been enhanced using an adaptive-tilt, multi-directional, shading technique and a non-filtering technique to characterize the regional fracture system. The shallowness and amount of stored groundwater in the fracture zones was assessed using vegetation indices derived from Landsat 8 OLI images. Then, 14 transient electromagnetic (TEM) survey profiles were taken in different geological settings across continuous lineaments that were considered to be aligned along inferred faults. In the central lineament zones, the TEM soundings gave resistivity values of less than 300 Ωm at a depth of 20–80 m. The values varied with location. Conversely, values greater than 400 Ωm were observed at the sites away from the central zones. This contrast is probably caused by the differences in permeability and degree of weathering along the fractured zones. These differences could be key factors in determining groundwater occurrence. By integrating five water-related factors (lineament density, slope, geology, vegetation index, and proximity to lineaments), high groundwater potential zones were located in the vicinity of the lineaments. In these zones, vegetation remains active regardless of the season.     

Performance of CMORPH,TMPA, and PERSIANN rainfall datasets over plain,mountainous, and glacial regions of Pakistan

The present study aims at the assessment of six satellite rainfall estimates (SREs) in Pakistan. For each assessed products, both real-time (RT) and post adjusted (Adj) versions are considered to highlight their potential benefits in the rainfall estimation at annual, monthly, and daily temporal scales. Three geomorphological climatic zones, i.e., plain, mountainous, and glacial are taken under considerations for the determination of relative potentials of these SREs over Pakistan at global and regional scales. All SREs, in general, have well captured the annual north-south rainfall decreasing patterns and rainfall amounts over the typical arid regions of the country. Regarding the zonal approach, the performance of all SREs has remained good over mountainous region comparative to arid regions. This poor performance in accurate rainfall estimation of all the six SREs over arid regions has made their use questionable in these regions. Over glacier region, all SREs have highly overestimated the rainfall. One possible cause of this overestimation may be due to the low surface temperature and radiation absorption over snow and ice cover, resulting in their misidentification with rainy clouds as daily false alarm ratio has increased from mountainous to glacial regions. Among RT products, CMORPH-RT is the most biased product. The Bias was almost removed on CMORPH-Adj thanks to the gauge adjustment. On a general way, all Adj versions outperformed their respective RT versions at all considered temporal scales and have confirmed the positive effects of gauge adjustment. CMORPH-Adj and TMPA-Adj have shown the best agreement with in situ data in terms of Bias, RMSE, and CC over the entire study area.     

Retrieving air humidity,global solar radiation,and reference evapotranspiration from daily temperatures: development and validation of new methods for Mexico. Part I: humidity

The occurrence of flood and drought frequency is highly correlated with the temporal fluctuations of streamflow series; understanding of these fluctuations is essential for the improved modeling and statistical prediction of extreme changes in river basins. In this study, the complexity of daily streamflow fluctuations was investigated by using multifractal detrended fluctuation analysis (MF-DFA) in a large heterogeneous lake basin, the Poyang Lake basin in China, and the potential impacts of human activities were also explored. Major results indicate that the multifractality of streamflow fluctuations shows significant regional characteristics. In the study catchment, all the daily streamflow series present a strong long-range correlation with Hurst exponents bigger than 0.8. The q-order Hurst exponent h(q) of all the hydrostations can be characterized well by only two parameters: a (0.354 ≤ a ≤ 0.384) and b (0.627 ≤ b ≤ 0.677), with no pronounced differences. Singularity spectrum analysis pointed out that small fluctuations play a dominant role in all daily streamflow series. Our research also revealed that both the correlation properties and the broad probability density function (PDF) of hydrological series can be responsible for the multifractality of streamflow series that depends on watershed areas. In addition, we emphasized the relationship between watershed area and the estimated multifractal parameters, such as the Hurst exponent and fitted parameters a and b from the q-order Hurst exponent h(q). However, the relationship between the width of the singularity spectrum (Δα) and watershed area is not clear. Further investigation revealed that increasing forest coverage and reservoir storage can effectively enhance the persistence of daily streamflow, decrease the hydrological complexity of large fluctuations, and increase the small fluctuations.     

Effect of asymmetrical street canyons on pedestrian thermal comfort in warm-humid climate of Cuba

Walkability and livability in cities can be enhanced by creating comfortable environments in the streets. The profile of an urban street canyon has a substantial impact on outdoor thermal conditions at pedestrian level. This paper deals with the effect of asymmetrical street canyon profiles, common in the historical centre of Camagüey, Cuba, on outdoor thermal comfort. Temporal-spatial analyses are conducted using the Heliodon2 and the RayMan model, which enable the generation of accurate predictions about solar radiation and thermal conditions of urban spaces, respectively. On these models, urban settings are represented by asymmetrical street canyons with five different height-to-width ratios and four street axis orientations (N-S, NE-SW, E-W, SE-NW). Results are evaluated for daytime hours across the street canyon, by means of the physiologically equivalent temperature (PET index) which allows the evaluation of the bioclimatic conditions of outdoor environments. Our findings revealed that high profiles (façades) located on the east-facing side of N-S streets, on the southeast-facing side of NE-SW streets, on the south-facing side of E-W street, and on the southwest-facing side of SE-NW streets, are recommended to reduce the total number of hours under thermal stress. E-W street canyons are the most thermally stressed ones, with extreme PET values around 36 °C. Deviating from this orientation ameliorates the heat stress with reductions of up to 4 h in summer. For all analysed E-W orientations, only about one fifth of the street can be comfortable, especially for high aspect ratios (H/W > 3). Optimal subzones in the street are next to the north side of the E-W street, northwest side of the NE-SW street, and southwest side of the SE-NW street. Besides, when the highest profile is located on the east side of N-S streets, then the subzone next to the east-facing façade is recommendable for pedestrians. The proposed urban guidelines enable urban planners to create and renovate urban spaces which are more efficient in diminishing pedestrian thermal stress.     

Changes in heat wave characteristics over Extremadura (SW Spain)

Theoretical and Applied Climatology - Heat wave (HW) events are becoming more frequent, and they have important consequences because of the negative effects they can have not only on the human...     

Defining deep decarbonization pathways for Switzerland: an economic evaluation

This article simulates deep decarbonization pathways for a small open economy that lacks the usual avenues for large CO₂ reductions – heavy industry and power generation. A computable general equilibrium model is used to assess the energy and economic impacts of the transition to only one ton of CO₂ emissions per capita in 2050. This represents a 76% reduction with respect to 1990 levels, while the population is expected to be 46% larger and GPD to increase by 90%. The article discusses several options and scenarios that are compatible with this emissions target and compares them with a reference scenario that extrapolates already-decided climate and energy policy instruments. We show that the ambitious target is attainable at moderate welfare costs, even if it needs very high carbon prices, and that these costs are lower when either CO₂ can be captured and sequestered or electricity consumption can be taxed sufficiently to stabilize it.

Policy relevance

In the context of COP 21, all countries must propose intended contributions that involve deep decarbonization of their economy over the next decades. This article defines and analyses such pathways for Switzerland, taking into consideration the existing energy demand and supply and also already-defined climate policies. It draws several scenarios that are compatible with a target of 1 ton of CO₂ emissions per capita in 2050. This objective is very challenging, especially with the nuclear phase out decided after the disaster in Fukushima and the political decision to balance electricity trade. Nevertheless, it is possible to design several feasible pathways that are based on different options. The economic cost is significant but affordable for the Swiss economy. The insights are relevant not only for Switzerland, but also for other industrialized countries when defining their INDCs.     

Multiple Random Walk Simulation: A Fast Method to Map Grade Uncertainty with Large Datasets

Multiple Random Walk Simulation consists of a methodology adapted to run fast simulations if close-spaced data are abundant (e.g., short-term mining models). Combining kriging with the simulation of random walks attempts to approximate traditional simulation algorithm results but at a computationally faster way when there is a large amount of conditioning samples. This paper presents this new algorithm illustrating the situations where the method can be used properly. A synthetic study case is presented in order to illustrate the Multiple Random Walk Simulation and to analyze the speed and goodness of its results against the ones from using Turning Bands Simulation and Sequential Gaussian Simulation.