Atmospheric insight to climatic signals of δ~(18)O in a Laohugou ice core in the northeastern Tibetan Plateau during 1960–2006

δ~(18)O variations;;ice core;;outgoing longwave radiation;;meridional wind;;northeastern Tibetan Plateau     

Numerical study on inter-tidal transports in coastal seas

Inter-tidal(subtidal) transport processes in coastal sea depend on the residual motion, turbulent dispersion and relevant sources/sinks. In Feng et al.(2008), an updated Lagrangian inter-tidal transport equation, as well as new concept of Lagrangian in- ter-tidal concentration(LIC), has been proposed for a general nonlinear shallow water system. In the present study, the LIC is nu- merically applied for the first time to passive tracers in idealized settings and salinity in the Bohai Sea, China. Circulation and tracer motion in the three idealized model seas with different topography or coastline, termed as ‘flat-bottom', ‘stairs' and ‘cape' case, re- spectively, are simulated. The dependence of the LIC on initial tidal phase suggests that the nonlinearities in the stairs and cape cases are stronger than that in the flat-bottom case. Therefore, the ‘flat-bottom' case still meets the convectively weakly nonlinear condi- tion. For the Bohai Sea, the simulation results show that most parts of it still meet the weakly nonlinear condition. However, the de- pendence of the LIS(Lagrangian inter-tidal salinity) on initial tidal phase is significant around the southern headland of the Liaodong Peninsula and near the mouth of the Yellow River. The nonlinearity in the former region is mainly related to the complicated coast- lines, and that in the latter region is due to the presence of the estuarine salinity front.     

深海细菌Pseudomonas sp. IOFA1中甲醛歧化酶FM11的纯化及性质研究

从印度洋深海沉积物中分离出一株能够高效降解甲醛的假单胞菌(Pseudomonas sp.IOFA1),该菌株可在40 min内完全降解100 mg/cm~3的甲醛.通过阴离子交换柱层析对菌株破碎液中的粗酶液进行纯化,得到一条具有甲醛降解活性的单一蛋白条带.经MALDI-TOF/TOF质谱鉴定,该蛋白为甲醛歧化酶蛋白(FM11).序列分析表明FM11与其它物种已知醛脱氢酶的氨基酸序列最高相似性为65%;结构域分析表明FM11含有2个保守的锌结合位点和一个NAD结合位点.酶学性质分析结果显示,FM11的最适反应温度为40℃,在25~50℃范围内能够保留95%以上的酶活力,尤其是在高于70℃的高温环境下仍保有约50%的活力,表现出广泛的温度适应性.FM11具有非常广泛的最适反应pH值范围(pH值为5~9),且在pH值4和pH值10时仍分别保留50%和80%左右的酶活力,表现出广泛的pH适应性.在pH值为5~7的条件下孵育1 h后,FM11仍保有97%以上的酶活,且在pH值为7~10条件下孵育1 h后,仍保留90%以上的酶活,表现出极好的酸性和碱性稳定性.Ca~(2+)、Mg~(2+)在低浓度时(0.5 mmol/dm~3)对FM11有较明显的激活作用.这些研究为我们进一步开发Pseudomonas sp.IOFA1甲醛歧化酶在降解甲醛方面的用途奠定了基础.     

Petrogenesis and Tectonic Significance of the Three‐Period Porphyries from the Daruoluolong Cu (Au) Deposit,Tibet, China

正Objective The Daruoluolong deposit is the first high-grade Cu(Au)deposit discovered in the middle section of the Bangonghu-Nujiang(herein after referred to as Ban-Nu)metallogenic belt,which has not been documented about previously.This deposit is located in Shuanghu County of northern Tibet,and its geotectonic position belongs to the     

Residual-state creep of clastic soil in a reactivated slow-moving landslide in the Three Gorges Reservoir Region,China

We study the creep properties of clastic soil in residual state. The intact samples are taken from a reactivated slow-moving landslide in the Three Gorges Reservoir Region, China. Firstly, the patterns of the landslide movement are analysed based on recent monitoring data, which indicate that the soil within the shear zone is undergoing two deformation processes: a creep phase, characterised by different creep rates, and a dormant phase. We then study the creep behaviour of the soil samples through a series of ring shear creep tests under various shear stress conditions. The creep response depends strongly on the ratio of the shear stress to the residual strength, and the normal effective stress, whereas the creep rate decreases due to strength regain. The long-term strength of the clastic soil is close to the residual strength. Therefore, the residual strength obtained from conventional shear test, which is less time consuming than creep test, can be used in long-term stability analyses of creeping landslides.     

Numerical simulation of lifetime and time-dependent damage for granite by continuous and discontinuous approaches

In this study, the time-dependent damage process of granite is investigated utilizing two numerical simulation schemes based on continuous method and discontinuous method. Numerical creep tests are carried out with both simulation schemes and mechanical responses and fracture patterns of rock specimens are analyzed. The calibrated numerical models can successfully reflect the typical creep stages observed in the laboratory. The predicted lifetime is in accordance with the laboratory test data. Comparisons are made between the two simulation schemes. It is found that both schemes have unique features that can promote a genuine reflection of the time-dependent damage process of the brittle rocks.     

Development of efficiently coupled thermo-hydro-mechanical model to predict hydraulic fracture morphology in heavy oil reservoirs

The aim of the study involves examining the effect of heavy oil viscosity on fracture geometry in detail by establishing a heavy oil fracturing model and conventional fracturing model based on thermal–hydraulic–mechanical (THM) coupled theory, Walther viscosity model, and K–D–R temperature model. We consider viscosity and density within the heavy oil fracturing model as functions of pressure and temperature while that as constants within the conventional fracturing model. A heavy oil production well is set as an example to analyze the differences between the two models to account for the thermo-poro-elastic effect. The results show that temperature exhibits the most significant influence on the heavy oil viscosity while the influence of pressure is the least. In addition, a cooling area with a width of 0–1 m and varied length is generated near the fracture. The heavy oil viscosity increases sharply in this area, thereby indicating an area of viscosity increment. The heavy oil viscosity increases faster and is closer to wellbore, and a high viscosity increment reduces the mobility of the heavy oil and prevents the fracturing fluid from entering into the reservoir. The special viscosity distribution results in significant differences in pore pressure, oil saturation, and changing trends between these two models. In the heavy oil reservoir fracturing model, the thermal effect completely exceeds the influence of pore elasticity, and the values of the fracture length, width, and static pressure exceed those calculated in the conventional fracturing model. Thus, a comparison of the measured values indicates that the results obtained by considering viscosity as a function of temperature and pressure are more accurate. Therefore, the results of this study are expected to provide good guidelines for the design of heavy oil fracturing.     

Carbonate formation mechanism in paleosol sediments of the Bohai Sea coastal zone,China

The Bohai Sea coastal zone of China consists of the Pacific Ocean to the east and Eurasia to the west; hence, this region is influenced by both the ocean and continental landmasses. The carbonate formation mechanism of eolian sediment within this area is poorly understood. The loess-paleosol sediments of the Miaodao stratigraphical section (MDS) contain a record of carbonate changes in this region during the last interglacial period. New insights into regional carbonate formation mechanisms since the last interglacial period were obtained by analyzing the ages of various sedimentary facies in combination with proxy paleoclimatic indices (including average grain size, standard deviation, CaCO₃ content, and clay minerals), as well as via foraminiferal analysis. The results led to three principal findings: (1) The carbonate content change in the MDS was neither controlled by grain size nor affected by minerals. The carbonate change controlled by precipitate leaching in the Loess Plateau region cannot explain the eolian sediments within the Bohai Sea coastal zone. (2) Various subsections contain obvious carbonate content changes caused by foraminiferal deposits atop the eolian sediments, which were deposited by storm surges during a high sea-level period. This increased the carbonate content in the eolian sediments and restricted the carbonate content in the Bohai Sea coastal zone. (3) Newly detected foraminifera of the last interglacial period on the eolian sediment of the MDS were the main source of carbonate content, providing a new understanding of the carbonate formation mechanism in eolian sediments different from that of the Loess Plateau.     

蚌埠隆起老山片麻状二长花岗岩的成岩与变质特征及其地质意义

蚌埠隆起是华北地块上中生代地质研究的一个十分难得的地质单元,它映现了中国东部最重要的两次构造运动(印支运动和燕山运动)所引起的岩浆作用和变质作用,其中,老山片麻状二长花岗岩就是一个代表性产物。该花岗岩的岩相学、地球化学以及锆石学的系统研究显示,它具有两个不同的岩石学特征:①它的斜长石斑晶的牌号(An_(14～18))、相对低硅高钙的主量元素、富Ba、Sr和贫Rb及无Eu负异常的微量元素等特征,以及它所含的岩浆锆石({211}锥面发育、较强的CL亮度及韵律环带构造、包含残核、正常的Hf含量)的U-Pb年龄(223.1 Ma)和ε_(Hf)(t)值(平均值为-14.2),表明它应该是印支运动的同造山花岗岩;②它的片麻状构造(斑晶矿物压扁拉长、各种交代—熔蚀结构)和变质结晶锆石({101}锥面发育、较弱的CL亮度、较高的Hf含量)的U-Pb年龄(156.2 Ma)和ε_(Hf)(t)值(平均值为-17.8),说明它在燕山运动中遭受了同造山变质作用。因此,老山片麻状二长花岗岩的存在,一方面使得大别造山带作为印支期陆陆碰撞造山带的岩石学记录完整,同时也制约了华南与华北两大板块之间碰撞挤压作用峰期的准确时间;另一方面,对燕山运动的起始时间(约170 Ma左右)和挤压高峰出现的时间(155±3 Ma)作出了合理的推断。这两方面的研究结果对于深入了解中国东部中生代的构造演化、岩石类型、成矿作用的现象及其机制具有深远的意义。