Evidence for fullerenes in solid bitumen from pillow lavas of Proterozoic age from Mítov (Bohemian Massif, Czech Republic)

Andesitic pillow lavas containing biogenic, solid bitumen (SB) are a constituent of a Neoproterozoic volcanosedimentary sequence (Teplá-Barrandian unit, Bohemian Massif) in the Mítov area of the Czech Republic. A black shale formation that is crosscut by these andesitic basalts is 565 Ma old. Carbon disulfide extracts of two powdered samples of SB contain 0.2 and 0.3 ppm of C₆₀, respectively, as determined by high-pressure liquid chromatography. The peak assignment based on retention time is fully supported by high-resolution electron ionization mass spectrometry (EI-MS). No C₇₀ was detected, nor was C₆₀ found in two other SB samples from this locality. Other investigated carbonaceous samples from Bohemia (coals and anthracites of Upper Paleozoic age and anthraxolite, graphitoids, and graphite of Upper Proterozoic age) did not contain fullerenes at concentrations above the detection limit of 0.01 ppm. The absence of C₆₀ in these samples was confirmed by EI-MS. The proposed mechanism of fullerene formation involves a primary algal phase, generation of a hydrocarbonaceous mixture in the course of thermal evolution of the sedimentary series, and their high-temperature transformation related to the extrusion of basalt. An important feature for fullerene conservation was the enclosure of fullerenes in SB with a structure similar to glasslike carbon, where the fullerene was protected against oxidation.     

Geochronology of Middle and Upper Pleistocene Loess Sections in Hungary

The application of both thermoluminescence and infrared stimulated luminescence dating to the extensively studied “classical” Hungarian loess/paleosol sequences from Basaharc, Mende, and Paks provides a reliable chronological framework and climatostratigraphic reconstruction for the last interglacial/glacial cycle. Based on this combined luminescence dating study a new chronology is proposed for the “Young Loess” in Hungary. Luminescence dating suggests that the loess below the MF2 horizon formed during the penultimate glaciation. The MF1 horizon probably formed during an interstade within oxygen isotope stage 3. For the youngest loess, overlying MF1, a very high accumulation rate was determined. Large time gaps occur above MF2 and MF1, indicating that most of the record of the last glaciation is missing in the standard sections at Basaharc, Mende, and Paks. Either large discontinuities or a very low accumulation rate occurred in all three type sections during the soil-forming periods. High-resolution studies of climatic proxies using this combined luminescence dating approach provide a reliable chronological framework for loess and loess derivatives of the last glacial cycle in Hungary, although a precise and complete chronostratigraphic reconstruction cannot be achieved from the incomplete records found at these sites.     

探测冰盖和多年冻土层的融冰探头研发

The exploration of ice sheets by melting vertical holes into the ground has some tradition in terrestrial glaciology. Such probes have been used since the 1960's to investigate the vertical structure of the ice in Greenland and Antarctica and in alpine glaciers. In this paper we look into the possibility to develop similar devices for use on extraterrestrial icy bodies, like e.g. the polar areas on Mars or the icy satellites of the outer solar system. We report on some basic experiments performed in the cryo-vacuum laboratory of the Space Research Institute of the Austrian Academy of Sciences, Graz. In these experiments the penetration of a simple melting probe into compact and porous water ice (with a snow-like texture) was monitored, both under vacuum conditions and under air pressure. The observed penetration speeds for a given power supply are compared with a simple mathematical model. We conclude that a miniature melting probe with small overall dimensions and a reasonable power demand could well be part of the payload of a future planetary mission, for example to the poles of Mars. Such missions are currently under discussion in several space agencies. Moreover such probes could also e? ectively be used in terrestrial environments. A possible design is presented at the end of the paper.     

Tetrahedral Plots of the Phase Relations for Basalts

The phase relations of quaternary systems are generally represented by projections onto ternary compositional planes. Such projections often obscure relationships that would only be evident in a three-dimensional tetrahedral plot. The tetrahedral plot requires that compositions of the minerals and melts be transformed into Cartesian coordinates. It is shown here how this transformation is carried out. The application is demonstrated by tetrahedral plots of experimental melt compositions of partially molten lherzolite. Furthermore, the plot can be used to evaluate whether or not a particular basaltic composition represents a primary melt. The methods are applicable to any four-component system.     

Pumpellyite in Low-grade Metamorphism

The regional metamorphism of the Kant? Mountains in Japan producedrocks of the following facies, with rising temperature: chloritefacies, pumpellyite-chlorite facies, glauco-phane-schist facies,and greenschist facies. This relationship is compared with theprogressive metamorphic zones in other regions where pumpellyitehas been found. Almost similar relations appear to hold in manymetamorphic terrains. Pumpellyites in glaucophanitic metamorphicterrains have, generally, low Fe'/R'R ratios. Physical andchemical conditions responsible for the formation of pumpellyiteare also discussed.     

A Raman spectroscopic study on the structural disorder of monazite–(Ce)

This study addresses whether Raman spectra can be used to estimate the degree of accumulated radiation damage in monazite-(Ce) samples whose chemical composition was previously determined. Our results indicate that the degree of disorder in monazite–(Ce), as observed from increasing Raman band broadening, generally depends on both the structural state (i.e., radiation damage) and the chemical composition (i.e., incorporation of non-formula elements). The chemical effects were studied on synthetic orthophosphates grown using the Li-Mo flux method, and non radiation-damaged analogues of the naturally radiation-damaged monazite–(Ce) samples, produced by dry annealing. We found that the “chemical” Raman-band broadening of natural monazite–(Ce) can be predicted by the empirical formula, $$ {\hbox{FWHM}} {\hbox{[c}}{{\hbox{m}}^{ - {1}}}{]} = {3}{.95} + {26}{.66} \times {\hbox{(Th}} + {\hbox{U}} + {\hbox{Ca}} + {\hbox{Pb)}} {\hbox{[apfu]}} $$ where, FWHM = full width at half maximum of the main Raman band of monazite–(Ce) (i.e., the symmetric PO₄ stretching near 970?cm^?1), and (Th+U+Ca+Pb) = sum of the four elements in apfu (atoms per formula unit). Provided the chemical composition of a natural monazite–(Ce) is known, this “chemical band broadening” can be used to estimate the degree of structural radiation damage from the observed FWHM of the ν₁(PO₄) band of that particular sample using Raman spectroscopy. Our annealing studies on a wide range of monazite–(Ce) reference materials and other monazite–(Ce) samples confirmed that this mineral virtually never becomes highly radiation damaged. Potential advantages and the practical use of the proposed method in the Earth sciences are discussed.     

Fluid inclusion studies of the Abawso gold prospect,near the Ashanti Belt,Ghana

The major Ghanaian lode gold deposits are preferentially aligned along the western and eastern contacts of the Kumasi Basin with the Ashanti and Sefwi Belts, respectively. The investigated area of the Abawso small-scale concession, covering the workings of the old Ettadom mine, is situated 3 km west of the lithological contact of the Birimian metavolcanic rocks of the Akropong Belt in the east with the Birimian metasedimentary rocks of the Kumasi Basin in the west. The rocks of the Abawso concession represent a steeply NW-dipping limb of a SE-verging anticline with an axis plunging to the SW. Quartz veining occurs predominantly in the form of en échelon dilatational veins along NNE–SSW-striking shear zones of a few metres width and shows evidence of brittle and ductile deformation. Also stockwork-style quartz veining occurs in the vicinity of the main shaft of the old Ettadom mine. Hydrothermal alteration includes sericitisation, sulphidation and locally carbonatisation. The auriferous quartz veins mainly follow the trend of brittle to ductile deformed quartz veins; however, some occur in stockwork. Fluid inclusion studies reveal a large number of H₂O inclusions along intragranular trails in auriferous quartz vein samples, as well as an overall dominance of H₂O and H₂O-CO₂ inclusions over CO₂ inclusions. Textural observations and physico-chemical fluid inclusion properties indicate post-entrapment modifications for all quartz vein samples due to grain boundary migration recrystallisation. This process is interpreted to be responsible for the generation of the CO₂ inclusions from a H₂O-CO₂ parent fluid. In comparison with mineralisation at the Ashanti and Prestea deposits, which are characterised by CO₂±N₂ inclusions, the observed inclusion assemblage may be due to a shallower crustal level of mineralisation, or different degrees and styles of recrystallisation, or a less pronounced development of laminated quartz veins due to comparably restricted pressure fluctuations. Furthermore, the microthermometric observations allow the reconstruction of a possible retrograde P-T path, depicting near-isothermal decompression in the P-T range of the brittle/ductile transition.Editorial handling: E. Frimmel     

Kinetics and Equilibrium Sorption Studies of 4-Nitrophenol on pyrolyzed and activated oil shale residue

Sorption of the organic pollutant 4-nitrophenol (4-NP) by pyrolyzed and activated Jordanian oil-shale was studied. Pyrolyzed oil shale was prepared using a fluidized bed reactor at 520 °C in the presence of nitrogen. Physical activation was carried out by treating the pyrolyzed oil shale with CO₂ at 830 °C, while chemical activation was achieved by using KOH and ZnCl₂ as impregnating agents. Batch kinetics and isotherm studies were conducted to evaluate the sorption process. Effects of contact time, initial sorbate concentration, sorbent concentration, temperature, pH and inorganic salts (NaCl and KCl) on the sorption process by the different sorbents were considered. Chemically activated oil shale, pretreated with ZnCl₂, gave the highest uptake of 4-NP. The isotherm experimental data fit reasonably well to Langmuir, Freundlich and Redlich-Paterson models. Three kinetic models, namely the Morris-Weber, Lagergren, and Pseudo-Second-Order model (PSOM), were applied to represent the experimental results for both pyrolyzed and ZnCl₂-oil shale sorbents.