Retrieval of outgoing longwave radiation from COMS narrowband infrared imagery

Hourly outgoing longwave radiation(OLR) from the geostationary satellite Communication Oceanography Meteorological Satellite(COMS) has been retrieved since June 2010. The COMS OLR retrieval algorithms are based on regression analyses of radiative transfer simulations for spectral functions of COMS infrared channels. This study documents the accuracies of OLRs for future climate applications by making an intercomparison of four OLRs from one single-channel algorithm(OLR12.0using the 12.0 μm channel) and three multiple-channel algorithms(OLR10.8+12.0using the 10.8 and 12.0 μm channels; OLR6.7+10.8using the 6.7 and 10.8 μm channels; and OLR All using the 6.7, 10.8, and 12.0 μm channels). The COMS OLRs from these algorithms were validated with direct measurements of OLR from a broadband radiometer of the Clouds and Earth's Radiant Energy System(CERES) over the full COMS field of view [roughly(50°S–50°N, 70°–170°E)] during April 2011.Validation results show that the root-mean-square errors of COMS OLRs are 5–7 W m-2, which indicates good agreement with CERES OLR over the vast domain. OLR6.7+10.8and OLR All have much smaller errors(～ 6 W m-2) than OLR12.0and OLR10.8+12.0(～ 8 W m-2). Moreover, the small errors of OLR6.7+10.8and OLR All are systematic and can be readily reduced through additional mean bias correction and/or radiance calibration. These results indicate a noteworthy role of the6.7 μm water vapor absorption channel in improving the accuracy of the OLRs. The dependence of the accuracy of COMS OLRs on various surface, atmospheric, and observational conditions is also discussed.     

Melt extraction and melt refertilization in mantle peridotite of the Coast Range ophiolite: an LA–ICP–MS study

The middle Jurassic Coast Range Ophiolite (CRO) is one of the most important tectonic elements in western California, cropping out as tectonically dismembered elements that extend 700 km from south to north. The volcanic and plutonic sections are commonly interpreted to represent a supra-subduction zone (SSZ) ophiolite, but models specifying a mid-ocean ridge origin have also been proposed. These contrasting interpretations have distinctly different implications for the tectonic evolution of the western Cordillera in the Jurassic. If an SSZ origin is confirmed, we can use the underlying mantle peridotites to elucidate melt processes in the mantle wedge above the subduction zone. This study uses laser ablation–inductively coupled plasma–mass spectrometry (LA–ICP–MS) to study pyroxenes in peridotites from four mantle sections in the CRO. Trace element signatures of these pyroxenes record magmatic processes characteristic of both mid-ocean ridge and supra-subduction zone settings. Group A clinopyroxene display enriched REE concentrations [e.g., Gd (0.938–1.663 ppm), Dy (1.79–3.24 ppm), Yb (1.216–2.047 ppm), and Lu (0.168–0.290 ppm)], compared to Group B and C clinopyroxenes [e.g., Gd (0.048–0.055 ppm), Dy (0.114–0.225 ppm), Yb (0.128–0.340 ppm), and Lu (0.022–0.05 ppm)]. These patterns are also evident in orthopyroxene. The differences between these geochemical signatures could be a result of a heterogeneous upper mantle or different degrees of partial melting of the upper mantle. It will be shown that CRO peridotites were generated through fractional melting. The shapes of REE patterns are consistent with variable degrees of melting initiated within the garnet stability field. Models call for 3% dry partial melting of MORB-source asthenosphere in the garnet lherzolite field for abyssal peridotites and 15–20% further partial melting in the spinel lherzolite field, possibly by hydrous melting for SSZ peridotites. These geochemical variations and occurrence of both styles of melting regimes within close spatial and temporal association suggest that certain segments of the CRO may represent oceanic lithosphere, attached to a large-offset transform fault and that east-dipping, proto-Franciscan subduction may have been initiated along this transform.     

Dissolution kinetics of calcite at 50-70 °C: An atomic force microscopic study under near-equilibrium conditions

Direct measurements of calcite faces were performed using in situ atomic force microscopy (AFM) to reveal the dissolution processes as a function of solution saturation state and temperature. Time-sequential AFM images demonstrated that step velocities at constant temperature increased with increasing undersaturation. The anisotropy of obtuse and acute step velocities appeared to become more significant as solutions approached equilibrium and temperature increased. At saturation state Ω > 0.02, a curvilinear boundary was formed at the intersection of two acute steps and the initially rhombohedral etch pit exhibited a nearly triangular shape. This suggests that the and steps may not belong to the calcite-aqueous solution equilibrium system. Further increase in the saturation state (Ω ? 0.3) led to a lack of etch pit formation and dissolution primarily occurred at existing steps, in accordance with Teng (2004). Analysis of step kinetics at different temperatures yielded activation energies of 25 ± 6 kJ/mol and 14 ± 13 kJ/mol for obtuse and acute steps, respectively. The inconsistencies in etch pit morphology, step anisotropy, and step activation energies from the present study with those of studies far-from-equilibrium can be explained by increased influence of the backward reaction, or growth, near-equilibrium. We propose that the backward reaction occurs preferentially at the acute-acute kink sites. The kinetics and effective activation energies of near-equilibrium calcite dissolution presented in this work provide accurate experimental data under likely CO₂ sequestration conditions, and thus are crucial to the development of robust geochemical models that predict the long-term performance of mineral-trapped CO₂.     

岛弧环境中不同成因的火成岩组合及其地质意义

岛弧环境的形成是与大洋板块俯冲作用有关,由俯冲流体作用于地幔楔部分熔融形成的钙碱性火成岩组合是岛弧环境中物质组成的主体。此外,目前还识别出与俯冲作用有关的其它的岩石类型:埃达克岩、富铌玄武岩、TTG、赞岐岩、玻安岩等,它们指示着不同的地球动力学背景、壳—幔相互作用过程以及源岩发生部分熔融的物理化学条件。本文主要对形成于岛弧环境中不同成因的火成岩组合的特征、形成机制、成矿作用及动力学意义进行了综述。     

Geochemical processes controlling arsenic mobility in groundwater: A case study of arsenic mobilization and natural attenuation

The behavior of As in the subsurface environment was examined along a transect of groundwater monitoring wells at a Superfund site, where enhanced reductive dechlorination (ERD) is being used for the remediation of groundwater contaminated with chlorinated solvents. The transect was installed parallel to the groundwater flow direction through the treatment area. The ERD technology involves the injection of organic C (OC) to stimulate in situ microbial dechlorination processes. A secondary effect of the ERD treatment at this site, however, is the mobilization of As, as well as Fe and Mn. The concentrations of these elements are low in groundwater collected upgradient of the ERD treatment area, indicating that, in the absence of the injected OC, the As that occurs naturally in the sediment is relatively immobile. Batch experiments conducted using sediments from the site inoculated with an Fe(III)- and As(V)-reducing bacterium and amended with lactate resulted in mobilization of As, Fe and Mn, suggesting that As mobilization in the field is due to microbial processes.     

Geological and geotechnical aspects of underground coal mining methods within Australia

About one quarter of the coal produced in Australia is by underground mining methods. The most commonly used underground coal mining methods in Australia are longwall, and room and pillar. This paper provides a detailed review of the two methods, including their advantages and disadvantages, the major geotechnical and operational issues, and the factors that need to be considered regarding their choice, including the varying geological and geotechnical conditions suited to a particular method. Factors and issues such as capital cost, productivity, recovery, versatility and mine safety associated with the two methods are discussed and compared. The major advantages of the longwall mining method include its suitability for mining at greater depth, higher recovery, and higher production rate compared to room and pillar. The main disadvantages of the room and pillar method are the higher risks of roof and pillar collapse, higher capital costs incurred as well as lower recovery rate.     

Effects of natural and calcined oyster shells on Cd and Pb immobilization in contaminated soils

In Korea, soils adjacent to abandoned mines are commonly contaminated by heavy metals present in mine tailings. Further, the disposal of oyster shell waste by oyster farm industries has been associated with serious environmental problems. In this study, we attempted to remediate cadmium (Cd)- and lead (Pb)-contaminated soils typical of those commonly found adjacent to abandoned mines using oyster shell waste as a soil stabilizer. Natural oyster shell powder (NOSP) and calcined oyster shell powder (COSP) were applied as soil amendments to immobilize Cd and Pb. The primary components of NOSP and COSP are calcium carbonate (CaCO₃) and calcium oxide (CaO), respectively. X-ray diffraction, X-ray fluorescence and scanning electron microscope analyses conducted in this study revealed that the calcination of NOSP at 770°C converted the less reactive CaCO₃ to the more reactive CaO. The calcination process also decreased the sodium content in COSP, indicating that it was advantageous to use COSP as a liming material in agricultural soil. After 30 days of incubation, we found that the 0.1 N HCl-extractable Cd and Pb contents in soil decreased significantly as a result of an increase in the soil pH and the formation of metal hydroxides. COSP was more effective in immobilizing Cd and Pb in the contaminated soil than NOSP. Overall, the results of this study suggest that oyster shell waste can be recycled into an effective soil ameliorant.     

Management and stability analysis of a seashore waste landfill site in Korea

Annual variation in the amount and composition of waste deposited in the Gimpo #2 landfill, the largest landfill around Seoul, Korea, is reviewed, and the stability of the same landfill is analyzed during waste disposal. For the stability analysis, three empirical stability prediction methods, i.e., linear stability, displacement velocity, and curve stability methods, are used to analyze field-measured settlement and horizontal displacement data. The analysis indicated that national waste management policy has greatly influenced the annual variation in the amount and composition of waste deposited in the landfill. Continuous measurement of geotechnical data and the use of stability analysis based on these data are necessary for landfills on seashore clay foundation. Stability of the landfill must be examined with various methods to ensure accurate determination of its stability.     

Geospatial spreadsheets with microscale air quality visualization and synchronization for supporting multiple-scenario visual collaboration

A major obstacle of the interdisciplinary communications for decision-making is that each participant prefers the solution from their own area because current collaboration systems cannot effectively mediate among many alternatives. If a visual collaboration system could display multiple alternatives in a single visual presentation, users would be able to compare alternatives with only a few variables, where all other parameters are fixed, at least from a visual perspective. In this study, we developed a visualization tool to support a microscale air quality (MSAQ) management group, the members of which often need to compare the effects of many alternative control methods. The main achievements of this study are: (1) three-dimensional (3D) visualization of the MSAQ using a 3D city model and (2) development of a geospatial spreadsheet (GS) to facilitate visual comparisons, thereby improving decision-making by making it easy to compare differences based on realistic visual display items. A questionnaire-based survey showed that use of the GS could generate a shared perspective and provide a spatiotemporal context for the participants, thereby making it easy to compare, mediate and reach decisions when confronted with many alternatives.