Energy dissipation behaviour of shear panels made of low yield steel

This paper presents the results of a pilot test conducted for evaluating the energy dissipation behaviour of shear panels made of low yield steel whose 0.2 per cent offset yield stress is 120 MPa. A total of six full-scale shear panels were tested with the loading condition, stiffener spacing, and magnitude of axial force as test variables. The shear panels tested yielded at a shear force that is approximately 1/3 of the yield shear force of equivalent shear panels made of common mild steel. Shear panels with proper stiffener arrangement exhibited stable hysteresis, thus ensuring large energy dissipation capacity. Sufficient strain hardening was observed in the shear panels tested, with their energy dissipation capacity about 1.5 times larger than that of an equivalent linear-elastic and perfect-plastic system. Plate buckling did not lead the shear panels to immediate degradation in their energy dissipation capacity. Post-buckling resistance was found to be a subject that requires further studies for quantifying the performance of shear panels made of low yield stress steel as hysteretic dampers.     

Full-correlation analysis of turbulent scattering layers in the mesosphere observed by the MU radar

We have applied a full-correlation analysis technique to the echo power fluctuations observed by the MU radar (35°N, 136°E), and analyzed the horizontal structure of the scattering pattern in the mesosphere as well as their horizontal motions. The velocity of the scattering pattern did not agree with the background wind velocity, but was associated with the horizontal propagating direction of a saturated inertia gravity wave identified in the wind field. The length of the long axis of the characteristic ellipse of the scattering pattern was approximately 50 km, and the direction was almost perpendicular to the propagating direction of the wave. The correlation time of the scattering pattern was approximately 700 s, which is much longer than the lifetime of the isolated turbulence itself. This implies that the observed scattering pattern is associated with a region where the saturated inertia gravity wave generates turbulence.     

Diurnal variations of the planetary boundary layer observed with anL-band clear-air doppler radar

Based on continuous observations of the planetary boundary layer (PBL) with anL-band (1357.5 MHz) boundary-layer radar (BLR) at a hilly location in Japan, we have discovered that on clear days, a thin enhanced echo layer corresponding to the top of the PBL (or mixed layer) appeared at about 500 m height in the morning and ascended to about 1500 m in the afternoon. Strong upward velocities were observed below the echo layer (or inside the PBL), reaching 1500 m in the afternoon.     

GeoFEM Kinematic Earthquake Cycle Simulation in Southwest Japan

— We construct a viscoelastic FEM model with 3-D configuration of the subducting Philippine Sea plate in Southwest Japan to simulate recent 300-year kinematic earthquake cycles along the Nankai-Suruga-Sagami trough, based on the kinematic earthquake cycle model. This 300-year simulation contains a series of three great interplate earthquakes. The inclusion of viscoelasticity produces characteristic velocity field during earthquake cycles regardless of the assumed constant plate coupling throughout the interseismic period. Just after the occurrence of interplate earthquakes, the viscoelastic relaxation creates the seaward motion in the inland region. In the middle period, the seaward motion gradually decreases, and the resultant velocity field is similar to the elastic one. Later, just before the next interplate earthquake, displacements due to the interplate coupling in the viscoelastic material are distributed more broadly in the forearc region than in the purely elastic one, since the viscoelastic relaxation due to the previous earthquake mostly disappears. The effects of such interplate earthquake cycles on five major inland faults in southwest Japan, where large intraplate earthquakes occurred during this period, are quantitatively evaluated using the Coulomb failure function (CFF). The calculated change in CFF successfully predicts the occurrence of the 1995 Kobe earthquake (M～7). The occurrence of other inland earthquakes, however, cannot be explained by the calculated changes in CFF, and especially the 1891 Nobi earthquake (M～8), the largest inland earthquake in Japan, which occurred at the time close to the local minimum of CFF. This implies that further improvements are necessary for our FEM modeling, such as the modeling of steady east-west compressive force and stress interactions between the inland faults.     

Astronomy in Japan

The research activity in Japanese astronomy is described, taking into account the social and historical background. A trend in the last two decades is shown by the numbers of papers in 13 branches of astronomy. Major research facilities and international collaboration programs are summerized. Future programs under consideration are briefly discussed.Paper presented at the Lembang-Bamberg IAU Colloquium No. 80 on Double Stars: Physical Properties and Generic Relations, held at Bandung, Indonesia, 3–7 June, 1983.     

Probing the evolution of early-type galaxies using multicolour number counts and redshift distributions

We investigate pure luminosity evolution models for early-type (elliptical and S0) galaxies (i.e. no number density change or morphological transition), and examine whether these models are consistent with observed number counts in the B , I and K bands, and redshift distributions of two samples of faint galaxies selected in the I and K bands. The models are characterized by the star formation time-scale τ _SF and the time t _gw when the galactic wind starts to blow, in addition to several other conventional parameters. We find that the single-burst model ( τ _SF=0.1 Gyr and t _gw=0.353 Gyr), which is known to reproduce the photometric properties of early-type galaxies in clusters, is inconsistent with the redshift distributions of early-type galaxies in the field environment, owing to overpredictions of the number of galaxies at z ≳1.4 even with strong extinction which is at work until t _gw. In order for dust extinction to be more effective, we treat τ _SF and t _gw as free parameters, and find that models with τ _SF≳0.5 Gyr and t _gw>1.0 Gyr can be made consistent with both the observed redshift distributions and the number counts, if we introduce strong extinction [ E ( B − V )≥1 as a peak value]. These results suggest that early-type galaxies in the field environment do not have the same evolutionary history as described by the single-burst model.     

H I observations of galaxies behind the Milky Way in the Puppis region

We report 21-cm H  i line observations of 161 galaxies located behind the Milky Way, in the Puppis region. The observations have been carried out with the Nançay radio telescope, resulting in 101 detections. Most of the galaxies observed appear in the ESO catalogue, and present apparent diameters larger than 1.6 arcmin. We show that the detection rate is strongly related to the apparent diameter; it is as high as 76 per cent for diameters larger than 1.6 arcmin. Half of the non-detections result, in fact, from an insufficient velocity coverage. Global parameters of the detected galaxies are computed, after a careful discussion of the correction for Galactic absorption. Our H  I data are then compared with those obtained by Kraan-Korteweg & Huchtmeier with the Effelsberg radio telescope for 20 galaxies observed in common: the agreement is excellent, implying respective uncertainties on recession velocities and on H  I fluxes lower than 10 km s⁻¹ and 2 Jy km s⁻¹ on average. Finally, we find that the detected galaxies follow well the correlation between the optical linear diameter and the H  I mass found by Haynes & Giovanelli. This result shows that our diameter corrections for Galactic absorption A_B are quite good, except for eight objects which are heavily obscured ( A_B 2.3), or have a very small diameter, lower than 0.5 arcmin.     

The design of diamond Compton telescope

We have developed radiation detectors using the new synthetic diamonds. The diamond detector has an advantage for observations of “low/medium” energy gamma rays as a Compton telescope. The primary advantage of the diamond detector can reduce the photoelectric effect in the low energy range, which is background noise for tracking of the Compton recoil electron. A concept of the Diamond Compton Telescope (DCT) consists of position sensitive layers of diamond-striped detector and calorimeter layer of CdTe detector. The key part of the DCT is diamond-striped detectors with a higher positional resolution and a wider energy range from 10 keV to 10 MeV. However, the diamond-striped detector is under development. We describe the performance of prototype diamond detector and the design of a possible DCT evaluated by Monte Carlo simulations.      

Spectroscopic observations of zeta Aurigae during the 1971–72 eclipse

The chromospheric phases in the 1971–72 eclipse were observed at wavelength regions containing the K-line of ionized calcium on six nights at ingress and on eight nights at egress at the Okayama Astrophysical Observatory. The linear dispersion of the spectrograms is about 10 Å mm^?1. The spectrograms were measured for line intensities of the K-line and for radial velocities of metallic and hydrogen lines. The results are compared with those obtained in the earlier eclipses. The intensities of the chromospheric K-line during this eclipse were relatively ‘weak’ at both ingress and egress and were similar to those in the 1939–40 eclipse. It seems that the chromospheric activity of ζ Aurigae increased after 1939, reached a maximum at 1950–56, and then decreased again until 1971. The radial velocities of the chromospheric lines of hydrogen atoms, ionized calcium, and some other atoms and ions varied with phase showing almost the same characteristic features as in most earlier eclipses. Intensities and velocities were also measured for satellite lines of the K-line.     

FeO*-Al2O3-TiO2-Rich Rocks of the Tertiary Bana Igneous Complex, West Cameroon

FeO*‐Al₂O₃‐TiO₂‐rich rocks are found associated with transitional tholeiitic lava flows in the Tertiary Bana plutono‐volcanic complex in the continental sector of the Cameroon Line. These peculiar rocks consist principally of iron‐titanium oxides, aluminosilicates and phosphates, and occur as layers 1–3 m thick occupying the upper part of lava flows on the southwest (site 1) and northwest (site 2) sites of the complex. Mineral constituents of the rocks include magnetite, ilmenite, hematite, rutile, corundum, andalusite, sillimanite, cordierite, quartz, plagioclase, alkali feldspar, apatite, Fe‐Mn phosphate, Al phosphate, micas and fine mixtures of sericite and silica. Texturally and compositionally, the rocks can be subdivided into globular type, banded type, and Al‐rich fine‐gained massive type. The first two types consist of dark globule or band enriched in Fe‐Ti oxides and apatite and lighter colored groundmass or bands enriched in aluminosilicates and quartz, respectively. The occurrence of andalusite and sillimanite and the compositional relations of magnetite and ilmenite in the FeO*‐Al₂O₃‐TiO₂‐rich rocks suggest temperatures of crystallization in a range of 690–830°C at low pressures. The Bana FeO*‐Al₂O₃‐TiO₂‐rich rocks are characterized by low concentrations of SiO₂ (25–54.2 wt%), Na₂O + K₂O (0–1%), CaO (0–2%) and MgO (0–0.5%), and high concentrations of FeO* (total iron as FeO, 20–42%), Al₂O₃ (20–42%), TiO₂ (3–9.2%), and P₂O₅ (0.26–1.30%). TiO₂ is positively correlated with Al₂O₃ and inversely correlated with FeO*. The bulk rock compositions cannot be derived from the associated basaltic magma by crystal fractionation or by partial melting of the mantle or lower crustal materials. In ternary diagrams of (Al₂O₃)?(CaO + Na₂O + K₂O)?(FeO*+ MnO + MgO) and (SiO₂)?(FeO*)?(Al₂O₃), the compositional field of the rocks is close to that of laterite and is distinct from the common volcanic rocks, suggesting that the rocks are derived from lateritic materials by recrystallization when the materials are heated by the basaltic magmas. A hydrothermal origin is discounted because the rocks contain high‐temperature mineral assemblages and lack sulfide minerals. It is proposed that the FeO*‐Al₂O₃‐TiO₂‐rich rocks of the Bana complex were formed by pyrometamorphism of laterite by the heat of basaltic magmas.