Finite‐element analysis of laminated rubber bearing of building frame under seismic excitation

Finite element analysis is carried out for a building frame supported by laminated rubber bearings to simultaneously investigate global displacement and local stress responses under seismic excitation. The frame members and the rubber bearings are discretized into hexahedral solid elements with more than 3 million degrees of freedom. The material property of rubber is represented by the Ogden model, and the frame is assumed to remain in elastic range. It is shown that the time histories of non‐uniform stress distribution and rocking behavior of the rubber bearings under a frame subjected to seismic excitation can be successfully evaluated, and detailed responses of base and frame can be evaluated through large‐scale finite element analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Atmospheric gravity waves identified by ground-based observations of the intensity and rotational temperature of OH airglow

Spectroscopic observations of OH airglow undertaken on May 2, 2006 at Uji, Japan reveal variations in intensity and rotational temperature related to the passage of an atmospheric gravity wave. The variations exhibit a period of approximately 1 h and magnitudes of 2–6% in intensity and 0.5–2% in rotational temperature. The vertical wavelength and intrinsic frequency of the atmospheric gravity wave were determined from the horizontal wavelength derived by an OH airglow imager, the background horizontal wind velocity obtained by the middle and upper atmosphere (MU) radar, and the dispersion relationship. The observed variations are consistent with the values calculated using the model of Liu, A.Z., Swenson, G.R. [2003. A modeling study of O₂ and OH airglow perturbations induced by atmospheric gravity waves. J. Geophys. Res. 108 (No. D4), 4151. doi:10.1029/2002JD002474].     

Detection and temporal variation of Co in the digestive glands of the common octopus, Octopus vulgaris, in the East China Sea

⁶⁰Co were detected in common octopus specimens collected in the East China Sea in 1996-2005. The source of ⁶⁰Co has remained unclear yet. Stable isotope analyses showed that there was no difference in stable Co concentrations between octopus samples with ⁶⁰Co and without ⁶⁰Co. This result showed that the stable Co in the digestive gland of octopus potentially did not include a trace amount of ⁶⁰Co and the source of ⁶⁰Co existed independently. Furthermore, investigations of octopus in other area and other species indicated that the origin of the source of ⁶⁰Co occurred locally in the restricted area in the East China Sea and not in the coastal area of Japan. Concentrations of ⁶⁰Co have annually decreased with shorter half-life than the physical half-life. This decrease tendency suggests that the sources of ⁶⁰Co were identical and were temporary dumped into the East China Sea as a solid waste.     

SAR- and gravity change-based characterization of the distribution pattern of pyroclastic flow deposits at Mt. Merapi during the past 10 years

Mt. Merapi, Indonesia, is one of the most active and dangerous volcanoes in the Torrid Zone. This volcano has erupted frequently and has produced pyroclastic flows following the collapse of the summit lava dome. We used Synthetic Aperture Radar (SAR) data acquired by JERS-1 and RADARSAT-1 satellites from April 1996 to July 2006 to clarify the distribution patterns of the pyroclastic flow deposits. The extent of the deposits, termed P-zones, was accurately extracted by ratio operation and low-level feature extraction from SAR intensity images. These images highlighted temporal changes of the distribution area, perimeter, flow distance, included angle, and collapse direction. To validate the image-processing results, reflectance spectra of the rock samples collected after the eruption in June 2006 were measured in a laboratory. The reflectance spectra of all samples showed similar characteristics to the reference spectra, which were derived from atmospheric correction of Hyperion sensor image data covering the lava dome at the summit. Therefore, P-zones were confirmed to be the pyroclastic flow deposits originating from destruction of the lava dome at the summit. The image-processing results clarified that the extent of the distribution areas, perimeter, flow distances, and included angle of the P-zones were variable among the eruptions, while the collapse direction had a constant pattern. The collapse pattern followed a clockwise change from the south toward the west. By comparing the ratio maps of Bouguer gravity anomaly data in two periods, the change was interpreted to originate from the inclination of the conduit and the formation of shallow and deep magma reservoirs.     

Temporal variations in channel patterns and facies architecture in a gravelly fluvial system: The Paleogene Iwaki Formation on the Joban Coalfield,a forearc basin in Northeast Japan

This paper examined sequence‐stratigraphic features of a gravelly fluvial system of the Iwaki Formation, which developed in a forearc‐basin setting in Northeast Japan during the Eocene through Oligocene. On the basis of three‐dimensional architectural element analysis, we discriminated three major cycles of channel complexes, which contain ten component channel deposits in total in the fluvial succession. Component channel deposits in the uppermost part of each cycle are sandier and associated with overbank muddy deposits and coal beds as compared with those in the lower part of the cycle. Mean clast‐size also decreases upsection in the entire gravelly fluvial deposits. The fluvial succession is interpreted to have been deposited in response to an overall rise in relative sea level that was superimposed by three short‐term relative sea‐level rises on the basis of vertical stacking patterns and component lithofacies features of channel deposits, and of correlation of the fluvial succession with an age‐equivalent marine succession in an area about 50 km offshore. However, geometry and stacking patterns of the channel complexes do not exhibit any distinct temporal variation and amalgamated channel and bar deposits are dominant throughout the transgressive fluvial succession. On the other hand, an overall fining‐upward pattern of the entire Iwaki Formation fluvial deposits in association with three component fining‐upward patterns is distinct, and is interpreted to be consistent with the tenet of the standard fluvial sequence‐stratigraphic models. This indicates that the present example represents one type of variation in the standard fluvial sequence‐stratigraphic models, possibly reflecting the forearc‐basin setting, which is generally represented by higher valley slope, higher shedding of coarse‐grained sediments, and shorter longitudinal profiles to the coastal area as compared with a passive‐continental‐margin setting.     

Influence of shear angle on hangingwall deformation during tectonic inversion

Tectonic inversion is a common phenomenon in island arc settings, especially in back‐arc basins. The reactivation of normal faults as thrusts, triggered by tectonic inversion, produces typical inversion fault‐related folds and thrusts in the hangingwall. These hangingwall inversion geometries are affected by two factors: the geometry of the underlying master fault and the angle of inclined simple shear relative to the regional dip of strata, in the case that the deformation is approximated by simple shear. This study employed numerical simulations to analyse the influence of the antithetic shear angle on the geometry of the hangingwall and displacement along the master fault. The simulation results reveal that a steeply inclined shear vector during extension produces a narrow, steep‐sided half‐graben, whereas a gently inclined shear produces a wide, open basin. After tectonic inversion, a tight anticline is formed under steeply inclined shear, whereas an open anticline is formed under gently inclined shear. Antithetic shear results in reduced total displacement along the master fault, and the greater the angle between the shear direction and the regional dip, the greater the displacement along the master fault. Because the deformation geometry of syn‐extension layers is affected by extension followed by contraction, a change in the shear angle during tectonic inversion produces a wide variety of deformation geometries. Comparison of the simulation results with the results of analogue modelling suggests that the shear angle decreases by 5° during the transition from extension to tectonic inversion and that such a change may be commonly observed in natural geological structures. These results highlight the benefits of numerical simulations, which can be used to readily examine a variety of constraining parameters and thereby lead to a better understanding of the mechanism of hangingwall deformation, avoiding erroneous estimates of the amount of fault displacement.     

Dissecting large earthquakes in Japan: Role of arc magma and fluids

We synthesized information from recent high-resolution tomographic studies of large crustal earthquakes which occurred in the Japanese Islands during 1995–2008. Prominent anomalies of low-velocity and high Poisson's ratio are revealed in the crust and uppermost mantle beneath the mainshock hypocenters, which may reflect arc magma and fluids that are produced by a combination of subducting slab dehydration and corner flow in the mantle wedge. Distribution of 164 crustal earthquakes ( M 5.7–8.0) that occurred in Japan during 1885–2008 also shows a correlation with the distribution of low-velocity zones in the crust and uppermost mantle. A qualitative model is proposed to explain the geophysical observations recorded so far in Japan. We consider that the nucleation of a large earthquake is not entirely a mechanical process, but is closely related to the subduction dynamics and physical and chemical properties of materials in the crust and upper mantle; in particular, the arc magma and fluids.     

Mixed Land Use and Obesity: An Empirical Comparison of Alternative Land Use Measures and Geographic Scales

Obesity is a growing epidemic in the United States. Walkable neighborhoods, characterized as having the three Ds of walkability (population Density, land use Diversity, and pedestrian-friendly Design), have been identified as a potentially promising factor to prevent obesity for residents. Past studies examining the relationship between obesity and walkability vary in geographic scales of neighborhood definitions and methods of measuring the three Ds. To better understand potential influences of these sometimes arbitrary choices, we test how four types of alternative measures of land use diversity measured at three geographic scales relate to body mass index for 4,960 Salt Lake County adults. Generalized estimation equation models demonstrate that optimal diversity measures differed by gender and geographic scale and that integrating walkability measures at different scales improved the overall performance of models.     

Mixing of magmatic CO2 into volcano groundwater flow at Aso volcano assessed combining carbon and water stable isotopes

To understand deep groundwater flow systems and their interaction with CO₂ emanated from magma at depth in a volcanic edifice, deep groundwater samples were collected from hot spring wells in the Aso volcanic area for hydrogen, oxygen and carbon isotope analyses and measurements of the stable carbon isotope ratios and concentrations of dissolved inorganic carbon (DIC). Relations between the stable carbon isotope ratio (δ¹³C_DIC) and DIC concentrations of the sampled waters show that magma-derived CO₂ mixed into the deep groundwater. Furthermore, groundwaters of deeper areas, except samples from fumarolic areas, show higher δ¹³C_DIC values. The waters' stable hydrogen and oxygen isotope ratios (δD and δ¹⁸O) reflect the meteoric-water origin of that region's deep groundwater. A negative correlation was found between the altitude of the well bottom and the altitude of groundwater recharge as calculated using the equation of the recharge-water line and δD value. This applies especially in the Aso-dani area, where deeper groundwater correlates with higher recharge. Groundwater recharged at high altitude has higher δ¹³C_DIC of than groundwater recharged at low altitude, strongly suggesting that magmatic CO₂ is present to a much greater degree in deeper groundwater. These results indicate that magmatic CO₂ mixes into deeper groundwater flowing nearer the magma conduit or chamber.