Inter‐annual variations and factors controlling evapotranspiration in a temperate Japanese cypress forest

This study was undertaken to evaluate the effects of climatic variability on inter‐annual variations in each component of evapotranspiration (ET) and the total ET in a temperate coniferous forest in Japan. We conducted eddy covariance flux and meteorological measurements for 7 years and parameterized a one‐dimensional multi‐layer biosphere‐atmosphere model (Kosugi et al., 2006 ) that partitions ET to transpiration (Tr), wet‐canopy evaporation (E_wet), and soil evaporation (E_soil). The model was validated with the observed flux data. Using the model, the components of ET were estimated for the 7 years. Annual precipitation, ET, Tr, E_wet, and E_soil over the 7 years were 1536 ± 334 mm, 752 ± 29 mm, 425 ± 37 mm, 219 ± 34 mm, and 108 ± 10 mm, respectively. The maximum inter‐annual fluctuation of observed ET was 64 mm with a coefficient of variance (CV) of 2.7%, in contrast to relatively large year‐to‐year variations in annual rainfall (CV = 20.1%). Tr was related to the vapour pressure deficit, incoming radiation, and air temperature with relatively small inter‐annual variations (CV = 8.2%). E_soil (CV = 8.6%) was related mainly to the vapour pressure deficit. E_wet was related to precipitation with large inter‐annual variations (CV = 14.3%) because of the variability in precipitation. The variations in E_wet were counterbalanced by the variations in Tr and E_soil, producing the small inter‐annual variations in total ET. Copyright © 2016 John Wiley & Sons, Ltd.     

Hayabusa‐returned sample curation in the Planetary Material Sample Curation Facility of JAXA

Abstract– The Planetary Material Sample Curation Facility of JAXA (PMSCF/JAXA) was established in Sagamihara, Kanagawa, Japan, to curate planetary material samples returned from space in conditions of minimum terrestrial contaminants. The performances for the curation of Hayabusa‐returned samples had been checked with a series of comprehensive tests and rehearsals. After the Hayabusa spacecraft had accomplished a round‐trip flight to asteroid 25143 Itokawa and returned its reentry capsule to the Earth in June 2010, the reentry capsule was brought back to the PMSCF/JAXA and was put to a series of processes to extract recovered samples from Itokawa. The particles recovered from the sample catcher were analyzed by electron microscope, given their ID, grouped into four categories, and preserved in dimples on quartz slide glasses. Some fraction of them has been distributed for initial analyses at NASA, and will be distributed for international announcement of opportunity (AO), but a certain fraction of them will be preserved in vacuum for future analyses.     

A first close look at the Balmer-edge behaviour of the quasar big blue bump

We have found for the first time a Balmer-edge feature in the polarized flux spectrum of a quasar (Ton 202). The edge feature is seen as a discontinuity in the slope, rather than as a discontinuity in the absolute flux. As the polarized flux contains essentially no broad emission lines, it is considered to arise interior to the broad emission line region, showing the spectrum with all the emissions outside the nucleus scraped off and removed. Therefore, the polarized flux spectrum is likely to reveal features intrinsic to the big blue bump emission. In this case, the existence of the Balmer-edge feature, seen in absorption in the shorter wavelength side, indicates that the big blue bump is indeed thermal and optically thick.     

High resolution spectroscopy with CSHELL

CSHELL, the NASA Infrared Telescope Facility Cryogenic Echelle Spectrograph was designed to fill a need for high sensitivity, high resolution, long slit near-infrared spectroscopy. Scientific programs in the areas of comets, planetary atmospheres, young stellar objects, the interstellar medium, and galactic dynamics have been pursued with CSHELL and are described herein. The future of the instrument is also discussed.     

The Structure of Young Stellar Jets and Winds Revealed by High Resolution [Fe II] λ1.644μm Line Observations

We present high angular resolution spectra taken along the jets from L1551 IRS 5 and DG Tau obtained with the Subaru Telescope. The position-velocity diagrams of the [Fe II] λ 1.644 μmemission line revealed remarkably similar characteristics for the two sources, showing two distinct velocity components separated from each other in both velocity and space with the entire emission range blueshifted with respect to the stellar velocity. The high velocity component (HVC) has a velocity of –200 ––300 km s^-1 with a narrow line width, while the low velocity component (LVC) is around –100 km s^-1 exhibitinig a broad line width. The HVC is located farther away from the origin and is more extended than the LVC. Our results suggest that the HVC is a well-collimated jet originating from the region close to the star, while the LVC is a widely-opened wind accelerated in the region near the inner edge of the accretion disk.     

Fassaites in compact type A Ca‐Al‐rich inclusions in the Ningqiang carbonaceous chondrite: Evidence for partial melting in the nebula

Abstract— Fassaite is a major component of Ca‐Al‐rich inclusions (CAIs) of Types B and C that crystallized from liquids. In contrast, this mineral is rarely reported in Type A inclusions and has been much less studied. In this paper, we report highly Ti‐, Al‐enriched fassaite that occurs as rims on perovskite in two compact Type A inclusions from the Ningqiang meteorite. In addition, one of the inclusions contains an euhedral grain of Sc‐fassaite (16.4 wt% Sc₂O₃) isolated in melilite. The occurrence and mineral chemistry of the fassaite rims can be explained by a reaction of pre‐existing perovskite with CAI melts. Hence, such rims may serve as an indicator for partial melting of Type A inclusions. The Sc‐fassaite is probably a relict grain. A third spherical CAI contains several euhedral grains of V‐fassaite (4.8–5.4 wt% V₂O₃) enclosed in a melilite fragment. The high V content of fassaite cannot be related to any Fremdlinge, magnetite, or metallic Fe‐Ni, because these phases are absent in the inclusion. In the same CAI, other fassaites intergrow with spinel and minor perovskite, filling voids inside of the melilite and space adjacent to the Wark‐Lovering rim. The fassaite intergrown with spinel is almost V‐free. The coexistence of two types of fassaite suggests that this CAI has not been completely melted.     

Variability of phosphine on Jupiter from 5-μm spectroscopy

Spectra of Jupiter recorded in the 1900- to 2300-cm^?1 range at the IRTF in Hawaii, July 1982, provide tentative evidence for variability of the Jovian atmosphere between zones and belts. It is concluded from analysis of the ν₁and ν₃ bands of PH₃ that there is a possible enhancement of the PH₃/H₂ ratio in the belts when compared to the zones. There is an apparent reduction of the PH₃ abundance between the IRIS Voyager 1 determinations and these spectra, implying temporal or spatial variability of PH₃ on Jupiter. Interpretation of this variability in the troposphere could involve both dynamical and thermochemical processes.     

Noble gases in individual chondrules of the Allende CV3 chondrite

We analyzed noble gases in nine individual chondrules, an assemblage of small chondrules, and four whole‐rock samples of the Allende CV3 chondrite. Major elements were also determined for five chondrules. The cosmic ray exposure ages are calculated from cosmogenic ³He to be 5.17 ± 0.38 and 5.15 ± 0.25 Myr for the averages of the chondrules and whole rocks, respectively, showing no significant pre‐exposure evidence for the studied chondrules. Large amounts of ³⁶Ar, ^80,82Kr, and ¹²⁸Xe produced by neutron capture are observed in most samples; the abundances of these nuclides are correlated among the samples. The epithermal neutron flux and neutron slowing down density are calculated based on [⁸⁰Kr]_n, from which a sample depth of about 30 cm can be calculated. The measured chondrules contain variable amounts of radiogenic ¹²⁹Xe. The abundance ratios of radiogenic ¹²⁹Xe to neutron capture–produced ¹²⁸Xe are rather constant among the studied chondrules; four chondrules give more precise ratios at the high‐temperature fractions, ranging from 1920 ± 80 to 2280 ± 140, which corresponds to a time difference of 3.9 ± 2.4 Myr. It is noticeable that most chondrules also contain ²⁴⁴Pu‐derived fission Xe. The average ²⁴⁴Pu/²³⁸U ratio for nine chondrules is 0.0069 ± 0.0018, which agrees well with the preferred ratio reported for chondrites.     

Distinctive erosional and depositional structures formed at a canyon mouth: A lower Pleistocene deep‐water succession in the Kazusa forearc basin on the Boso Peninsula,Japan

The canyon mouth is an important component of submarine‐fan systems and is thought to play a significant role in the transformation of turbidity currents. However, the depositional and erosional structures that characterize canyon mouths have received less attention than other components of submarine‐fan systems. This study investigates the facies organization and geometry of turbidites that are interpreted to have developed at a canyon mouth in the early Pleistocene Kazusa forearc basin on the Boso Peninsula, Japan. The canyon‐mouth deposits have the following distinctive features: (i) The turbidite succession is thinner than both the canyon‐fill and submarine‐fan successions and is represented by amalgamation of sandstones and pebbly sandstones as a result of bypassing of turbidity currents. (ii) Sandstone beds and bedsets show an overall lenticular geometry and are commonly overlain by mud drapes, which are massive and contain fewer bioturbation structures than do the hemipelagic muddy deposits. (iii) The mud drapes have a microstructure characterized by aggregates of clay particles, which show features similar to those of fluid‐mud deposits, and are interpreted to represent deposition from fluid mud developed from turbidity current clouds. (iv) Large‐scale erosional surfaces are infilled with thick‐bedded to very thick‐bedded turbidites, which show lithofacies quite similar to those of the surrounding deposits, and are considered to be equivalent to scours. (v) Concave‐up erosional surfaces, some of which face in the upslope direction, are overlain by backset bedding, which is associated with many mud clasts. (vi) Tractional structures, some of which are equivalent to coarse‐grained sediment waves, were also developed, and were overlain locally by mud drapes, in association with mud drape‐filled scours, cut and fill structures and backset bedding. The combination of these outcrop‐scale erosional and depositional structures, together with the microstructure of the mud drapes, can be used to identify canyon‐mouth deposits in ancient deep‐water successions.