Experimental study on the effect of bottomless structure in front of a bottom outlet on a sediment flushing cone

One of the main problems in reservoirs is sedimentation which reduces the operating life of dams if a proper plan and analysis method are not in place.The techniques to manage sediment in reservoirs include several sustainable management techniques that route sediment through or around the reservoir.One of the main economical methods in arid and semi-arid regions is pressurized flushing using moderate drawdown of the water level of the reservoir to evacuate sediment deposited behind dams.In the current study,the effect of a new structure called a dendritic bottomless extended(DBE)outlet structure at three angles of 30°,45°,and 60°
on pressurized flushing efficiency was investigated.Consequently,45 experiments were designed for three discharge rates (Qo),three sediment levels(Hs),four types of structure,and a no-structure condition(reference test).The results indicated that the DBE structure with a 30°angle between the branches,a sedimentary dimensionless index of Hs/Do=4.59,and a flow dimensionless index of Qo=/√gD05=1:43(where g is the acceleration of gravity and Do is the diameter of the bottom outlet)lead to 10-fold increase in the sediment flushing cone dimensions and sediment removal efficiency compared to the results of the reference test.Finally,according to a statistical analysis of the results,a dimensionless equation for calculating the sediment flushing cone dimensions was developed for the tested sediment characteristics.     

Application of the Ordered Weighted Averaging (OWA) method to the Caspian Sea conflict

This study proposes a promising allocation mechanism of the Caspian Sea natural resources, which are presently shared among five countries. To date, these nations have been unable to reach an allocation agreement. We apply a methodology to propose the most appropriate solution under different risk attitudes of the states. This research is different from other studies regarding the Caspian Sea negotiations in that it employs risk-based fuzzy multi attribute decision making methods for simulating the risk attitudes or optimism/pessimism degrees of the decision makers. The ordered weighted averaging (OWA) approach, which considers the optimism/pessimism degree quantitatively, is used to take into account the effects of different risk attitudes of the negotiators on the final outcome. We demonstrate how one could obtain a range of alternatives under different multi attribute and risk attitudes. The induced OWA (IOWA) method is also used to determine the relative power of these states bordering the Caspian Sea by considering several attributes, including different risk attitudes of agents. Results indicate that taking into account the risk attitude (prone, neutral, averse) of the states can affect the overall ranking of the proposed solutions. The findings from this study may facilitate negotiation regarding the most preferred allocation mechanism for the Caspian Sea.     

Interpretation of magnetic and gravity gradient tensor data using normalized source strength – A case study from McFaulds Lake,Northern Ontario,Canada

In this paper, we present a case study on the use of the normalized source strength (NSS) for interpretation of magnetic and gravity gradient tensors data. This application arises in exploration of nickel, copper and platinum group element (Ni‐Cu‐PGE) deposits in the McFaulds Lake area, Northern Ontario, Canada. In this study, we have used the normalized source strength function derived from recent high resolution aeromagnetic and gravity gradiometry data for locating geological bodies. In our algorithm, we use maxima of the normalized source strength for estimating the horizontal location of the causative body. Then we estimate depth to the source and structural index at that point using the ratio between the normalized source strength and its vertical derivative calculated at two levels; the measurement level and a height h above the measurement level. To discriminate more reliable solutions from spurious ones, we reject solutions with unreasonable estimated structural indices. This method uses an upward continuation filter which reduces the effect of high frequency noise. In the magnetic case, the advantage is that, in general, the normalized magnetic source strength is relatively insensitive to magnetization direction, thus it provides more reliable information than standard techniques when geologic bodies carry remanent magnetization. For dipping gravity sources, the calculated normalized source strength yields a reliable estimate of the source location by peaking right above the top surface. Application of the method on aeromagnetic and gravity gradient tensor data sets from McFaulds Lake area indicates that most of the gravity and magnetic sources are located just beneath a 20 m thick (on average) overburden and delineated magnetic and gravity sources which can be probably approximated by geological contacts and thin dikes, come up to the overburden.     

Risk assessment of polycyclic aromatic hydrocarbons in the West Port semi-enclosed basin (Malaysia)

Sediment samples collected from the West Port, the west coastal waters of Malaysia, were analyzed by standard methods to determine the degree of hydrocarbon contamination and identify the sources of polyaromatic hydrocarbons (PAHs). Concentrations of PAHs in the port sediments ranged from 100.3 to 3,446.9 μg/kg dw. The highest concentrations were observed in stations close to the coastline, locations affected by intensive shipping activities and industrial input. These were dominated by high-molecular-weight PAHs (4–6 rings). Source identification showed that PAHs originated mostly pyrogenically, from the combustion of fossil fuels, grass, wood, and coal or from petroleum combustion. Regarding ecological risk estimation, only station 7 was moderately polluted, the rest of the stations suffered rare or slight adverse biological effects with PAH exposure in surface sediment, suggesting that PAHs are not considered as contaminants of concern in the West Port.     

Hydrochemistry, mineralogy and chemical fractionation of mine and processing wastes associated with porphyry copper mines: A case study from the Sarcheshmeh mine, SE Iran

The Sarcheshmeh is one of the largest Oligo-Miocene porphyry Cu deposits in the world. Comparative hydrochemical, mineralogical and chemical fractionation associated with mining efflorescence salts and processing wastes of this mine are discussed. Hydrochemical results showed that rock waste dumps, reject wastes and old impoundments of tailings are the main sources of acid mine drainage waters (AMD) that contain potentially toxic metals such as Cd, Co, Cu, Mn, Ni and Zn as well as Al. Episodic fluxes of highly contaminated acidic waters were produced in a tailings dam over a short period of time. Secondary soluble minerals provide important controls on the quality of AMD produced, especially in old, dry tailings impoundments. Secondary sulfate minerals such as gypsum, magnesiocopiapite, hydronium jarosite, kornelite and coquimbite were found in rock waste drainages and in old weathered reject wastes. Highly soluble secondary minerals such as gypsum, eriochalcite, and bonattite are also observed in an evaporative layer on old tailings impoundments. Chemical fractionation patterns of potentially toxic elements showed that the geochemical behavior of metals is primarily controlled by the mineralogical composition of waste samples. Elements such as Co, Cr, Cu, Mn, Ni and Zn are readily released into the water soluble fraction from efflorescence salts associated with rock waste drainages, as well as from the evaporative layer of old tailings. Potentially toxic elements, such as As, Mo and Pb, are principally adsorbed or co-precipitated with amorphous and crystalline Fe oxides, but they may also be associated with oxidizing, primary sulfides and residual fractions. Following the development of the dammed tailings pond, the secondary minerals were dissolved, producing acidic waters contaminated by Al (154 mg L⁻¹), Cu (150 mg L⁻¹), Cd (0.31 m gL⁻¹), Co (2.13 mg L⁻¹), Mn (73.7 mg L⁻¹), Ni (1.74 mg L⁻¹), Zn (20.3 mg L⁻¹) and Cl (1690 mg L⁻¹). Therefore, the potential use of recycled water from the Sarcheshmenh dammed tailings pond is diminished by the presence of corrosive ions like Cl⁻ in highly acidic fluids that promote corrosion of pipes and pumps in the water recycling system.     

Application of rock mass index (RMi) to the rock mass excavatability assessment in open face excavations

Earthwork and surface excavation activities play an important role in construction projects. Selecting the best technique to loosen the overburden material within the surface excavation in open mining and geotechnical projects is of great importance from economical and technical viewpoints. Surface excavation includes direct digging, ripping and blasting. To select the most effective method and plan for excavation, geotechnical investigation is very important. It is also a big help in avoiding conflict between contractors and clients when they do not reach mutual agreement regarding the price of rock and soil excavation. There are many engineering classification systems used to assess rock masses for excavation purposes. All of these systems consider several geotechnical parameters to assess the earth masses. This study reviews these systems and then offers a new categorization based on the Rock Mass index (RMi) classification system and block volume to assess excavation in rock masses. The original dataset was obtained from the literature review as well as the surface excavation in Upper Gotvand dam and Hydro Power Plant (HPP). The offered system was also validated through the data extracted from the surface excavation in Sardasht dam and HPP in Iran.     

Prediction of ground vibration due to quarry blasting based on gene expression programming: a new model for peak particle velocity prediction

Blasting is a widely used technique for rock fragmentation in opencast mines and tunneling projects. Ground vibration is one of the most environmental effects produced by blasting operation. Therefore, the proper prediction of blast-induced ground vibrations is essential to identify safety area of blasting. This paper presents a predictive model based on gene expression programming (GEP) for estimating ground vibration produced by blasting operations conducted in a granite quarry, Malaysia. To achieve this aim, a total number of 102 blasting operations were investigated and relevant blasting parameters were measured. Furthermore, the most influential parameters on ground vibration, i.e., burden-to-spacing ratio, hole depth, stemming, powder factor, maximum charge per delay, and the distance from the blast face were considered and utilized to construct the GEP model. In order to show the capability of GEP model in estimating ground vibration, nonlinear multiple regression (NLMR) technique was also performed using the same datasets. The results demonstrated that the proposed model is able to predict blast-induced ground vibration more accurately than other developed technique. Coefficient of determination values of 0.914 and 0.874 for training and testing datasets of GEP model, respectively show superiority of this model in predicting ground vibration, while these values were obtained as 0.829 and 0.790 for NLMR model.     

General conservation equations for multi-phase systems: 3. Constitutive theory for porous media flow

Equations which describe single phase fluid flow and transport through an elastic porous media are obtained by applying constitutive theory to a set of general multiphase mass, momentum, energy, and entropy equations. Linearization of these equations yields a set of equations solvable upon specification of the material coefficients which arise. Further restriction of the flow to small velocities proves that Darcy's law is a special case of the general momentum balance.