Lithostratigraphy and standard microfacies types of the Neogene carbonates of Rabigh and Ubhur areas, Red Sea coastal plain of Saudi Arabia

The Neogene carbonate rocks have relatively small exposure relative to the siliciclastic and evaporite rocks in Rabigh and Ubhur areas, north Jeddah, Red Sea coastal plain of Saudi Arabia. The Miocene carbonates form small hills in both areas, which conformably overlie the siliciclastics, whereas the Pleistocene coral reefs form terraces facing the Red Sea in Rabigh area. The Neogene carbonates are represented by the following microfacies types: (1) dolomitic, oolitic, foraminiferal packstone; (2) sandy, dolomitic, intraclastic, foraminiferal packstone; (3) dolomitic and oolitic wackestone; (4) dolomitic, foraminiferal, intraclastic wackestone; (5) dolomitic mudstone; (6) coral boundstone; and (7) grainstone. The diagenetic processes affecting these carbonates are compaction, dissolution, aggrading neomorphism, and replacement that took place during deposition, shallow burial, and uplift. Pervasive dolomitization by the seepage reflux mechanism is responsible for the mimic replacement of the calcite of the original component of the limestone with dolomite. Sediments, biota, and lithofacies characteristics of the studied carbonate rocks of Rabigh and Ubhur areas indicate the presence of three facies zones; these are (1) FZ 5 platform margin reefs, (2) FZ 6 (platform margin sand shoals), and (3) FZ 7 platform interior-normal marine. The standard microfacies types are represented by (1) SMF 12, limestone with shell concentration; (2) SMF 15, oolitic wackestone and packstone; and (3) SMF 18, bioclastic grainstone and packstone with abundant benthic foraminifera.     

Predicting the production rate of diamond wire saw using statistical analysis

Performance prediction of diamond wire saws is important in the cost estimation and the planning of the stone quarries. An accurate estimation of sawability helps to make the planning of the rock cutting projects more efficient. In this paper, the performance prediction of diamond wire saws in cutting carbonate rocks was studied on 14 different carbonate rocks in stone quarries located in Iran. Rock samples were collected from the quarries for laboratory tests. Uniaxial compressive strength, Brazilian tensile strength, Schmidt hammer value, and Los Angeles abrasion were determined in the laboratory. Performance prediction was evaluated using simple and multiple regression analyses. Finally, a new model was proposed for predicting the production rate of diamond wire saw. It was concluded that the production rate of carbonate rock using diamond wire saw can reliably be estimated using the developed model.     

Application of randomized sampling schemes to curvelet‐based sparsity‐promoting seismic data recovery

Reconstruction of seismic data is routinely used to improve the quality and resolution of seismic data from incomplete acquired seismic recordings. Curvelet‐based Recovery by Sparsity‐promoting Inversion, adapted from the recently‐developed theory of compressive sensing, is one such kind of reconstruction, especially good for recovery of undersampled seismic data. Like traditional Fourier‐based methods, it performs best when used in conjunction with randomized subsampling, which converts aliases from the usual regular periodic subsampling into easy‐to‐eliminate noise. By virtue of its ability to control gap size, along with the random and irregular nature of its sampling pattern, jittered (sub)sampling is one proven method that has been used successfully for the determination of geophone positions along a seismic line. In this paper, we extend jittered sampling to two‐dimensional acquisition design, a more difficult problem, with both underlying Cartesian and hexagonal grids. We also study what we term separable and non‐separable two‐dimensional jittered samplings. We find hexagonal jittered sampling performs better than Cartesian jittered sampling, while fully non‐separable jittered sampling performs better than separable jittered sampling. Two other 2D randomized sampling methods, Poisson Disk sampling and Farthest Point sampling, both known to possess blue‐noise spectra, are also shown to perform well.     

Interaction of a Fresh Water Lake and a Karstic Spring via a Syncline Fold

Kaftar Lake is a high‐altitude fresh water lake located in High Zagros, south of Iran. Despite the high annual evaporation to precipitation ratio in the area, lake water electrical conductivity is usually lower than 1000 µS/cm, this may be due to high seepage from the floor of the lake. Therefore, the hypothesis of possible underground connections between Namdan Basin, where the lake is located, and the surrounding basins with lower elevation (Aspas and Dehbid Basins) was investigated. Hydrogeology, hydrochemistry, and stable isotopes data of the lake and surrounding basins along with the lake water balance study were applied to test the hypothesis. Results indicate that Kaftar Lake has no connection with Aspas Basin in south, but it is hydraulically connected to Dehbid Basin. In Dehbid Basin, “Ghasr_e_Yaghoob spring” (average discharge ?1200 L/s) emerges from a small outcrop (about 0.8 km²) of Daryan limestone Formation, where this outcrop is much smaller than the required recharge area for such average discharge rate. The study shows that this spring is recharged by Kaftar Lake and Namdan Basin aquifer, through Daryan Formation of Gandboee Syncline located to the northern part of the lake.     

Development of ground-testable phase fresnel lenses in silicon

Diffractive optics, such as Phase Fresnel Lenses (PFL's), offer the potential to achieve excellent imaging performance in the x-ray and gamma-ray photon regimes. In principle, the angular resolution obtained with these devices can be diffraction limited. Furthermore, improvements in signal sensitivity can be achieved as virtually the entire flux incident on a lens can be concentrated onto a small detector area. In order to verify experimentally the imaging performance, we have fabricated PFL's in silicon using gray-scale lithography to produce the required Fresnel profile. These devices are to be evaluated in the recently constructed 600-meter x-ray interferometry testbed at NASA/GSFC. Profile measurements of the Fresnel structures in fabricated PFL's have been performed and have been used to obtain initial characterization of the expected PFL imaging efficiencies.     

The EUV Imaging Spectrometer for Hinode

The EUV Imaging Spectrometer (EIS) on Hinode will observe solar corona and upper transition region emission lines in the wavelength ranges 170?–?210 Å and 250?–?290 Å. The line centroid positions and profile widths will allow plasma velocities and turbulent or non-thermal line broadenings to be measured. We will derive local plasma temperatures and densities from the line intensities. The spectra will allow accurate determination of differential emission measure and element abundances within a variety of corona and transition region structures. These powerful spectroscopic diagnostics will allow identification and characterization of magnetic reconnection and wave propagation processes in the upper solar atmosphere. We will also directly study the detailed evolution and heating of coronal loops. The EIS instrument incorporates a unique two element, normal incidence design. The optics are coated with optimized multilayer coatings. We have selected highly efficient, backside-illuminated, thinned CCDs. These design features result in an instrument that has significantly greater effective area than previous orbiting EUV spectrographs with typical active region 2?–?5 s exposure times in the brightest lines. EIS can scan a field of 6×8.5 arc?min with spatial and velocity scales of 1 arc?sec and 25 km?s^?1 per pixel. The instrument design, its absolute calibration, and performance are described in detail in this paper. EIS will be used along with the Solar Optical Telescope (SOT) and the X-ray Telescope (XRT) for a wide range of studies of the solar atmosphere.     

Landslide susceptibility modeling in a landslide prone area in Mazandarn Province,north of Iran: a comparison between GLM,GAM, MARS,and M-AHP methods

Theoretical and Applied Climatology - Landslides are identified as one of the most important natural hazards in many areas throughout the world. The essential purpose of this study is to compare...     

Recent warming trend in the coastal region of Qatar

The objective of this study was to analyze long-term temperature-related phenomena in the eastern portion of the Middle East, focusing on the coastal region of Qatar. Extreme temperature indices were examined, which were defined by the Expert Team on Climate Change Detection and Indices, for Doha, Qatar; these indices were then compared with those from neighboring countries. The trends were calculated for a 30-year period (1983–2012), using hourly data obtained from the National Climatic Data Center. The results showed spatially consistent warming trends throughout the region. For Doha, 11 of the 12 indices studied showed significant warming trends. In particular, the warming trends were represented by an increase in the number of warm days and nights and a decrease in the number of cool nights and days. The high-temperature extremes during the night have risen at more than twice the rate of their corresponding daytime extremes. The intensity and frequency of hot days have increased, and the minimum temperature indices exhibited a higher rate of warming. The climatic changes in Doha are consistent with the region-wide heat-up in recent decades across the Middle East. However, the rapid economic expansion, increase of population since the 1990s, and urban effects in the region are thought to have intensified the rapidly warming climate pattern observed in Doha since the turn of the century.