Magnetic anisotropy of hematite natural crystals: high field experiments

Hematite is one of the most important carriers of remanent magnetization in natural samples. Its strong magnetocrystalline anisotropy makes it difficult to determine one single value for the magnetic anisotropy constant and other magnetic properties. In particular, the anisotropy of hematite within its basal plane is controversial because an assumed triaxial anisotropy compatible with the crystallographic structure has not always been detected. This study presents a comparative analysis of rock magnetic properties, compositional analysis and determination of the magnetic anisotropy constant. Different models with anisotropy constant within the basal plane ranging from 0 to 13 (J m⁻³) are considered in the evaluation of the factors that control the presence or absence of a triaxial anisotropy. A linear relationship between saturation magnetization (M _s ) and coercitivity (B _c ) in measurements at increasing temperatures is observed in samples where anisotropy is either uniaxial or biaxial while those with significant triaxial anisotropies have a power–law relationship between M _s and B _c .     

An approach for estimating sustainable yield of karst water in data sparse regions

This study presents an approach for transferring the qualitative analysis of groundwater sustainability for development to quantitative evaluation by an analogy of two similar regions. A concept of groundwater exploitation sustainability (GES), which is an evaluation index based on water supply capability, eco-geo-environment maintaining capability and the harmony between water and society, is put forward. The fuzzy analytic hierarchy process method is applied to calculate the GES for the Xiangshan and Dianchang karst groundwater sources in the Huaibei city, Anhui Province, China. The GES of the Xiangshan karst system was calculated to be 0.53 and represents medium exploitation sustainability, while that for the Dianchang is relatively high with a value of 0.70. These two karst systems are separate units but have similar hydrogeological conditions. The Dianchang area had limited groundwater observation data, while the Xiangshan area had long series of observation data, which enabled the computation of the sustainable yield. The sustainable yield of the Xiangshan karst area was used to calibrate the GES, and develop a linear equation between the GES and sustainable yield, which was used to calculate the sustainable yield of the Diangchang karst area as 40.4 million m³.     

Determinants of the increased CO<Subscript>2</Subscript> emission and adaption strategy in Chinese energy-intensive industry

Climate change has not only brought about many natural hazards but also threaten the sustainable development of industry. This study is to investigate the adaptive implications for energy-intensive industries of China in response to climate change impacts. For this purpose, a deep and comprehensive analysis on the change of CO₂ emission for 6 energy-intensive sectors is explored over the period of 2000–2007. A Log-Mean Divisia Index based on time series is also introduced in our study to identify the key factors toward the change of CO₂ emission. It is shown that there were 146.1 million metric tons carbon increased in energy-intensive industries from 2000 to 2007. And the excessive growth of industrial output and increasingly fossil-intensive energy consumption structure were the main driving forces for the increased CO₂ emission. Nevertheless, energy intensity change and declining emission coefficient of electricity played negative role in the growing trend of CO₂ emission. On the basis of these four determinants (namely industrial output, energy intensity, fuel mix effect, and emission coefficient), it is suggested that both economic motives and technologically feasible approaches should be implemented to control the scale of excessive productions and improve energy efficiency toward the energy-intensive industries. And more importantly, strengthening energy-intensive sectors’ awareness of climate change adaptation should be given stronger emphasis as long-term work with the help of some propaganda campaigns for instance.     

Geochemical characteristics of heavy metals in coastal sediments from the northern Beibu Gulf (SW China): the background levels and recent contamination

Four sediment cores and one hundred surface sediments were collected from the intertidal zone of the northern Beibu Gulf (SW China). In order to detect the intensity of metal contamination recently, the background levels were successfully established for Pb, Zn, Cd and Cr, based on the linear regression of deeper sediments (pre-industrial). Aluminum is a better geochemical normalizer than Fe and it is commonly used to describe the natural metal variability of the coastal sediments. The evident enrichment of Zn and Cd is recorded in the surface sediments of the eastern side of the Guangxi coast and the central part of the Qinzhou Bay, but it does not exceed the effects range-low values, due to a low percentage of fine-grained sediments in the region. Although the Pb and Cr concentrations are mainly of natural origin, 3 and 6% sites exceed the effects range-low values, respectively; indicating the potential for adverse ecological effects of metals on the benthic communities.     

Brittle-plastic deformation in initially dry rocks at fluid-present conditions: transient behaviour of feldspar at mid-crustal levels

We present detailed microstructural and chemical analyses from an initially dry anorthositic rock deformed during wet amphibolite facies conditions. Three different domains representing the microstructural variation of the deformed samples are investigated in detail in terms of fracture morphology and mode, grain characteristics and chemistry of present phases. Results show transient deformational behaviour where a close interaction between brittle, plastic and fluid-assisted deformation mechanisms can be observed. Our analysis allows us to describe the succession, interrelationships and effects of active mechanisms with progressively increasing strain in three so-called stages. In Stage 1, initial fracturing along cleavage planes promoted fluid influx that caused fragmentation and chemical reactions, producing fine-grained mineral assemblages in the fractures. Deformation twins and dislocations developed in clast pieces due to stress relaxation. Passive rotation of conjugate fracture sets and interconnection of intracrystalline fractures formed micro-shear-zones, constituting Stage 2. Microstructures and grain relationships indicate the activity and fluctuation between fracturing, dissolution-precipitation creep, grain boundary sliding and locally dislocation creep, reflecting the transient behaviour of brittle and plastic deformation mechanisms. Further rotation and widening of fractures into overall foliation parallel shear-bands (Stage 3) promoted strain partitioning into these areas through increased fluid influx, influence of fluid-assisted grain boundary sliding, phase mixing and presence of weak phases such as white mica. We suggest that local differences in fluid availability, volume fraction of weak phases produced by fluid present metamorphic reactions coupled with volume increase and local variations in stress concentration induced transient brittle-plastic behaviour. The studied shear-zone represents an example of the transformation of a rigid dry rock to a soft wet rock during deformation through syntectonic fracturing.     

The early Miocene (~25 Ma) volcanism in the northern Kyushu-Palau Ridge,enriched mantle source injection during rifting prior to the Shikoku backarc basin opening

The northern Kyushu-Palau Ridge (KPR), remnant conjugate arc of the Izu-Ogasawara (Bonin)-Mariana (IBM) active arc, is dominated by basalt-andesite except for the Komahashi-Daini Seamount where acidic plutonic rocks of 38 Ma were recovered. These mafic to intermediate volcanics are produced by the rifting volcanism in the proto-IBM arc associated with spreading of the Shikoku Basin. The HFSE and HREE contents and ratios of these volcanics indicate enriched source mantle composition compared to recent volcanic front. The LILE ratios exhibit similar characteristics to reararc volcanism of the recent Izu arc, and some enriched volcanics exhibit high abundance of sediment melt inputs. Based on these observations and compilations of the published data set, the replacement event of the wedge mantle under the IBM arc occurred two times. The first event occurred between 45 and 38 Ma, with Pacific type mantle being replaced by depleted Indian type mantle. The second event occurred between 36 and 25 Ma, enriched mantle flowed from reararc side. The slab component during the proto-IBM arc rifting was a similar characteristic to recent reararc volcanism of the Izu arc, and sediment melt added in a local area.     

Early Triassic potassic volcanism in the Afyon Zone of the Anatolides/Turkey: implications for the rifting of the Neo-Tethys

Afyon Zone, which was derived from the Anatolide–Tauride platform during closure of the Neo-Tethys, is made up of pre-Mesozoic basement and unconformably overlying Triassic–Early Tertiary cover series. The Afyon Zone contains widespread metavolcanic rocks, which are dominated by rhyolite, dacite, and trachyandesite. They form a distinct volcanic succession, which is separated from the underlying Silurian–Lower Carboniferous metacarbonates and meta-siliciclastics by a regional unconformity. Trachyandesitic metavolcanics are made up of massive lava flows, pyroclastics and epiclastics, less frequently, domes and dikes, which were developed on a deeply eroded subaerial landmass. U/Pb and Pb/Pb zircon geochronology yielded Lower Triassic (~250 Ma) ages, which are interpreted as extrusion age of trachyandesitic volcanics. Based on the stratigraphic, geochronological, and geochemical data, we suggest that these Lower Triassic magmatic rocks represent an extensional tectonic setting on the northern active margin of the Gondwana, which led to the development of the northern branch of the Neo-Tethys.     

Permian continental basins in the Southern Alps (Italy) and peri-mediterranean correlations

The Late Carboniferous to Permian continental successions of the Southern Alps can be subdivided into two main tectono-sedimentary Cycles, separated by a marked unconformity sealing a Middle Permian time gap, generally estimated at over 10 Ma. The lower cycle (1), between the Variscan crystalline basement and the Early Permian, is mainly characterised by fluvio-lacustrine and volcanic deposits of calc-alkaline acidic-to-intermediate composition, which range up to a maximum thickness of more than 2,000 m. The upper cycle (2), which is devoid of volcanics, is mostly dominated through the Mid?–Late Permian by alluvial sedimentation which covered the previous basins and the surrounding highs, giving rise to the subaerial Verrucano Lombardo-Val Gardena (Gröden) red-beds, up to about 800 m thick. The palaeontological record from the terrigenous deposits of both the above cycles consists mainly of macro- and microfloras and tetrapod footprints. The age of the continental deposits is widely discussed because of the poor chronological significance of a large number of fossils which do not allow reliable datings; however, some sections are also controlled by radiometric calibrations. The comparison with some selected continental successions in southern Europe allows to determine their evolution and set up correlations. A marked stratigraphic gap shows everywhere between the above-mentioned Cycles 1 and 2. As in the Southern Alps, the gap reaches the greatest extent during the Mid-Permian, near the Illawarra Reversal geomagnetic event (265 Ma). In western Europe, however, such as in Provence and Sardinia, the discussed gap persists upwardly to Late Permian and Early Triassic or slightly younger times, i.e. to the onset of the “Alpine sedimentary Cycle”, even though in northeastern Spain (Iberian Ranges, Balearic Islands) this gap results clearly interrupted by late Guadalupian–Lopingian deposits. The above two major tectonosedimentary cycles reflect, in our view, two main geodynamic events that affected the southern Europe after the Variscan orogenesis: the Late Carboniferous–Early Permian transformation of the Gondwana–Eurasia collisional margin into a diffuse dextral transform margin and the Middle–Late Permian opening of the Neotethys Ocean, with the onset of a generalised extensional tectonic regime and the progressive westward marine ingression.     

Driftwood deposition from debris flows at slit-check dams and fans

Experience shows that debris flows containing large woody debris (driftwood) can be more damaging than debris flows without driftwood. In this study, the deposition process of debris flows carrying driftwood was investigated using numerical simulations and flume experiments. Debris-flow trapping due to driftwood jamming in a slit-check dam was also investigated. A numerical model was developed with an interacting combination of Eulerian expression of the debris flow and Lagrangian expression of the driftwood, in which the fluctuating coordinates and rotation of the driftwood were treated stochastically. The calculated shapes and thicknesses of a debris-flow fan and the positions and orientations of the deposited driftwood on a debris-flow fan were consistent with experimental flume results. The jamming of driftwood in a slit-check dam was evaluated based on geometry and probability. The simulated results of outflow discharge and the proportion of driftwood passed through the slit-check dam also agreed with the experimental results.