Magnetic properties,self-reversal remanence and thermal alteration products of smythite

Summary This study is a follow up of the investigation of some magnetic properties and metastability of greigite in samples obtained from Miocene claystones in the Kruné hory (Erzgebirge) Piedmont basins (Bohemia). Three different methods of upgrading the smythite were applied; the magnetic properties of the concentrates are compared. The thermal conversion of smythite sets in at 200°C while greigite converts at 250°C. The first intermediate products to be formed are iron sulphides, marcasite clearly dominating over pyrite and pyrrhotite. Apart from a Fe³⁺ sulphate with a composition of Fe₂(SO₄)₃, oxidation of these sulphides gives rise to -Fe₂O₃. The result of the subsequent decomposition of the mentioned sulphate is the formation of -Fe₂O₃, which retains the sulphate structure. The final product of the thermal decomposition at 800°C is -Fe₂O₃. In the smythite concentrate the conversion to Fe³⁺ sulphate and -Fe₂O₃ is about twice as intensive as in greigite. No direct conversion to -Fe₂O₃ was found. During the thermal process self-reversals of remanence were observed, in various samples as many as four reversals in the temperature interval from 340 to 590°C. The occurrences of self-reversals of remanence were only observed at high degrees of thermal demagnetization, of the order of 10^–2 down to 10^–3 in the temperature interval of sulphide origin (below 400°C), and of the order of 10^–4 down to 10^–6 in the temperature interval of Fe-oxides origin (above 400°C).Presented at the 3rd Conference on New Trends in Geomagnetism, Castle of Smolenice, Czechoslovakia, June 22–29, 1992     

Alkaline and ultramafic carbonate lamprophyres in Central Bohemian carboniferous basins,Czech Republic

Summary Dykes of alkaline and ultramafic carbonate lamprophyres (monchiquite-ouachitite and aillikite) intrude the Carboniferous sediments of Central Bohemia. Their characteristic feature is the presence of substantial amounts of a sodalite group mineral (presumably haüyne), carbonate and barite. Isotopic compositions of ¹³C (–3.4 to –6.2) and ¹⁸O ( + 13.5 to + 15.9) indicate that the carbonate is of primary magmatic origin and that fluids were formed at temperatures of 500 to 350°C. High contents of CO₂ (3.6 to 17.6 wt.%) and incompatible elements, high LREE/HREE ratios (30.0 to 57.7), and low Rb/Sr (0.025 to 0.078) and⁸⁷Sr/⁸⁶Sr (0.7038 to 0.7042) ratios suggest the ultramafic lamprophyres are related to deep-seated carbonated magmas of mantle origin. Low degree of partial melting ( < 1%) of the mantle peridotite is envisaged, with additional transport of fluids rich in incompatible elements into the crustal chamber. Alkaline lamprophyres are fractionated derivatives which originated from the same source. Magma intrusion from different levels of a magma chamber into fracture zones under horizontal tension without a central intrusion could result in variability in lamprophyre composition (cumulates or evolved derivatives).

---

Alkalische und ultramafische Karbonat-Lamprophyre der zentralen böhmischen Karbonbecken, Tschische Republik

Zusammenfassung Alkalische und ultramafische Karbonat-Lamprophyrgänge (Monchiquit-Ouachitit und Aillikit) intrudieren in karbonische Sedimente Zentralböhmens. Sie sind charakterisiert durch das Auftreten von beträchtlichen Mengen an Mineralen der Sodalith-Gruppe (v.a. Haüyn), Karbonaten und Baryt. Ihre Isotopenzusammensetzung von ¹³C (–3.4 bis –6.2) und ¹⁸O (13.5 bis 15.9) zeigt, daß die Karbonate primär magmatischen Ursprungs sind und daß assoziierte Fluide in einem Temperaturbereich von 350 bis 500°C gebildet wurden. Hohe Gehalte an CO₂ (3.6 bis 17.6 Gew. %), inkompatiblen Elementen, hohe LREE/HREE-Verhältnisse (30.0 bis 57.7), sowie niedrige Rb/Sr—(0.025 bis 0.078) und⁸⁷Sr/⁸⁶Sr-(0.7038 bis 0.7042) Verhältnisse lassen vermuten, daß die ultramafischen Lamprophyre mit karbonatischen Magmen des Mantels in Beziehung stehen. Eine niedrige Aufschmelzungsrate ( < 1%) von Mantelperidotit mit zusätzlichem Transport von, an inkompatiblen Elementen angereicherten Fluiden, in die krustale Magmenkammer wird diskutiert. Alkalische Lamprophyre sind als stärker fraktionierte Magmen, die derselben Quelle entstammen, zu verstehen. Die Intrusion der aus verschiedenen Bereichen der Magmenkammer stammenden Magmen in durch horizontale Dehnung verursachte Störungszonen könnte das Fehlen eines zentralen Intrusionskörpers und die unterschiedliche Zusammensetzung der Lamprophyre (Kumulate oder entwickelte Derivate) erklären.

---

---

With 8 Figures     

Primitive island arc and oceanic lavas from the hunter ridge-hunter fracture zone. Evidence from glass,olivine and spinel compositions

Summary At its southernmost end, the main spreading centre of the North Fiji Basin is propagating into arc crust of the poorly-known Hunter Ridge. We define nine magmatic groups from major element glass chemistry and olivine and spinel compositions in samples dredged from twenty six sites in this area by the R/V Academician A. Nesmeyanov in 1990. These include groups of boninites, island arc tholeiites (IAT), mid-ocean ridge basalts (MORB), enriched mid-ocean ridge basalts (E-MORB), olivine porphyritic andesites and basaltic andesite and Na-rhyolites. Primitive lavas containing highly forsteritic olivine phenocrysts are common in all the groups, except for the rhyolites.We report over 100 glass analyses for dredged rocks from this region, and about 300 olivine-spinel pairs for representatives of all the magmatic groups identified, except the Na-rhyolites.The MORB in this region are probably produced at the propagating spreading centre in the southern part of the North Fiji Basin. Juxtaposition of shallow, hot MORB-source diapirs supplying the MORB in this area, and the sub-arc damp, refractory upper mantle beneath the Hunter Ridge, provides suitable petrogenetic conditions to produce a range of magma types, from island arc tholeiites through to high-Ca boninites. The latter were recovered in eleven dredges.The E-MORB lavas recovered from the extreme southern margin of the North Fiji Basin are shown to be essentially identical to those dredged from adjacent older South Fiji Basin crust. It is hypothesized that the former were either scraped off the South Fiji Basin crust during an episode of oblique subduction that may have generated the Hunter Ridge during the last 5 Myr, or alternatively, that slices of the South Fiji Basin crust were trapped and incorporated into the North Fiji Basin as the subduction zones fronting the Vanuatu arc stepped or propagated southward.

---

Primitive Inselbogen- und ozeanische Laven von Hunter Rücken und der Hunter BruchZone: die Bedeutung der Zusammensetzung von Glas, Olivin und Spinell

Zusammenfassung Das spreading centre des Nord-Fidschi-Beckens setzt sich an seinem südlichsten Ende in die Inselbogen-Kruste des noch wenig bekannten Hunter-Rückens fort.Wir definieren 9 magmatische Gruppen auf der Basis der Hauptelement-Zusammensetzung von Gläsern und der Zusammensetzung von Olivin und Spinell in Proben die das Forschungsschiff R/V Akademiker A. Nesmeyanov von 26 Stellen im Jahr 1990 aufgesammelt hat. Zu diesen gehören Gruppen von Boniniten, Inselbogentholeiiten (IAT), Basalten zentralozeanischer Rücken (MORB), angereicherte zentralozeanische Rücken (E-MORB), Olivin-porphyritische Andesite und basaltische Andesite, sowie Na-Rhyolite. Primitive Laven mit Olivinkristallen, die reich an Forsterit-Komponenten sind, kommen in allen diesen Gruppen, mit Ausnahme der Rhyolite, vor.Wir legen über 100 Glas-Analysen von Gesteinen aus diesem Gebiet vor und über 300 Olivin-Spinell-Paare für Vertreter aller der hier identifizierten magmatischen Gruppen, mit Ausnahme der Natriumrhyolite.Die MORB in diesem Gebiet sind wahrscheinlich an dem aktiven Spreading Center im Südteil des Nord-Fidschi-Beckens entstanden. Das nebeneinander Vorkommen von seichten heißen MORB-Quellen Diapiren, die MORB in diesem Gebiet erzeugen, und der Sub-Inselbogen, wasserhaltige, refraktäre obere Mantel unter dem Hunter Rücken führen zu geeigneten petrogenetischen Bedingungen für die Entstehung einer Vielfalt von Magmatypen, von Inselbogentholeiiten bis zu sehr Kalziumreichen Boniniten. Die letzteren wurden in 11 Dredge-Proben gefunden.Die E-MORS Laven, die aus dem extremen Südteil des Nord-Fidschi-Beckens entnommen wurden, sind im wesentlichen mit jenen identisch, die aus der benachbarten älteren Kruste des Süd-Fidschi-Beckens stammen. Es wird vermutet, daß die letzteren entweder aus dem Süd-Fidschi-Becken während einer Episode obliger Subduktion, die in den letzten 5 Millionen Jahren zur Entstehung des Hunter Ridge geführt hat, abgeschert wurden, oder auch daß Teile der Kruste des Süd-Fidschi-Beckens in das Nord-Fidschi-Becken inkorporiert wurden als Subduktionszonen gegenüber dem Vanuato-Bogen sich nach Süden fortbewegten.

     

Coupled atmosphere-ocean models of Titan's past

We have developed a coupled atmosphere and ocean model of Titan's surface. The atmospheric model is a 1-D spectrally-resolved radiative-convective model. The ocean thermodynamics are based upon solution theory. The ocean, initially composed of CH4, becomes progressively enriched in ethane over time. The partial pressures of N2 and CH4 in the atmosphere are dependent on the ocean temperature and composition. We find that the resulting system is stable against a runaway greenhouse. Accounting for the decreased solar luminosity, we find that Titan's surface temperature was about 20 K colder 4 Gyr ago. Without an ocean, but only small CH4 lakes, the temperature change is 12 K. In both cases we find that the surface of Titan may have been ice covered about 3 Gyr ago. In the lakes case condensation of N2 provides the ice, whereas in the ocean case the ocean freezes. The dominant factor influencing the evolution of Titan's surface temperature is the change in the solar constant--amplified, if an ocean is present, by the temperature dependence of the solubility of N2. Accretional heating can dramatically alter the surface temperature; a surface thermal flux of 500 erg cm-2 sec-1, representative of small levels of accretional heating, results in a approximately 20 K change in surface temperatures.     

The deposit size frequency method for estimating undiscovered uranium deposits

The deposit size frequency (DSF) method has been developed as a generalization of the method that was used in the National Uranium Resource Evaluation (NURE) program to estimate the uranium endowment of the United States. The DSF method overcomes difficulties encountered during the NURE program when geologists were asked to provide subjective estimates of (1) the endowed fraction of an area judged favorable (factorF) for the occurrence of undiscovered uranium deposits and (2) the tons of endowed rock per unit area (factorT) within the endowed fraction of the favorable area. Because the magnitudes of factorsF andT were unfamiliar to nearly all of the geologists, most geologists responded by estimating the number of undiscovered deposits likely to occur within the favorable area and the average size of these deposits. The DSF method combines factorsF andT into a single factor (F·T) that represents the tons of endowed rock per unit area of the undiscovered deposits within the favorable area. FactorF·T, provided by the geologist, is the estimated number of undiscovered deposits per unit area in each of a number of specified deposit-size classes. The number of deposit-size classes and the size interval of each class are based on the data collected from the deposits in known (control) areas. The DSF method affords greater latitude in making subjective estimates than the NURE method and emphasizes more of the everyday experience of exploration geologists. Using the DSF method, new assessments have been made for the young, organic-rich surficial uranium deposits in Washington and idaho and for the solution-collapse breccia pipe uranium deposits in the Grand Canyon region in Arizona and adjacent Utah.     

Carbonatites from Eastern Paraguay and genetic relationships with potassic magmatism: C, O, Sr and Nd Isotopes

Summary Geochemical characteristics were systematically determined for Early Cretaceous samples of carbonatitic rocks from Eastern Paraguay (Rio Apa, Amambay and Central Provinces). The data show that all the occurrences have an enriched isotopic signature and that the carbonatites have negligible or absent crustal signature. A petrogenetic model (parent liquids, fractional crystallization, hydrothermal interactions and weathering) is proposed as a function of incompatible trace element, stable (O-C) and radiogenic (Sr-Nd) isotope variations with the aim to test the significance of carbonatitic complexes as a marker of the metasomatized subcontinental lithospheric mantle. The results indicate that the carbonatites and primary carbonates from eastern Paraguay, and those from the north eastern Paraná Basin (SE Brazil), were affected by metasomatic events distinct in time and composition.

---

Karbonatite aus Ost-Paraguay und ihre genetische Beziehung zu Kalium-Magmatismus: C O, Sr und Nd isotope

Zusammenfassung Die geochemischen Charakteristika von frühkretazischen Karbonatitproben aus Ostparaguay (Rio Alpa, Amambay und Zentrale Provinzen) wurden untersucht. Die Daten belegen, daß alle Vorkommen eine isotopische Anreicherungssignatur zeigen und daß ihnen eine entsprechende Krustensignatur fehlt. Ein Petrologisches Modell (Ausgangsschmelze, fraktionierte Kristallisation, hydrothermale Interaktion und Verwitterung) wird auf Grund der Verteilung der inkompatiblen Spurenelemente, der stabilen (C-O) und radiogenen (Sr-Nd) Isotope vorgeschlagen. Es versucht die Bedeutung der Karbonatitkomplexe als Markerhorizonte des metasomatischen subkontinentalen Mantels zu überprüfen. Die Ergebnisse zeigen, daß die Karbonatite und die primären Karbonate in Ostparaguay, und jene aus dem Paraná Becken SüdostBrasiliens durch zeitlich und zusammensetzungsmäßig unterschiedliche metasomatische Prozesse erfaßt wurden.

---

---

With 10 Figures     

A Step Towards Evaluation of the Seismic Response Reduction Factor in Multistorey Reinforced Concrete Frames

A seismic nonlinear time-history analysis was made for four-, six-, and eight-storey reinforced concrete buildings. These buildings were made as three-dimensional space frame structures with shear walls in both orthogonal directions. They have five bays with 4.8 m spacing each in the horizontal direction, and three bays with 4.2 m spacing each in the transversal direction. The frames were designed according to the Jordanian Seismic Code of practice for Seismic Zones 4, 3, 2, and 1 as proposed for Jordan by several authors. Time-history analysis was made using the El Centro (N-S) earthquake record of May 1940 as an actual earthquake excitation. The response reduction factor (R) that primarily consists of two factors that are the ductility reduction (Rµ) and the overstrength (), is obtained. It has been seen that the seismic zoning has a slight effect on the ductility reduction factor for different buildings, since it ranges from Zone 4 to Zone 1 as 2.37 to 2.52, 1.72 to 1.78, and 1.14 to 1.18 for four-, six-, and eight-storey buildings, respectively. Moreover, it is observed that, for different buildings and different seismic zones, the ductility reduction factor (Rµ) is slightly different from the system ductility factor (µ) especially for higher values of µ (i.e., Rµ µ). The response reduction factor, called overstrength (), was evaluated. The overstrength factor was found to vary with seismic zones (Z) , number of stories, and design gravity loads. However, the dependency on seismic zones was the strongest. The average overstrength of these buildings in Zones 4 and 1 was 2.61 and 6.94, respectively. The overstrength increased as the number of storeys decreased: overstrength of a four-storey building was higher than an eight-storey building by 36% in Zone 4, and 39% in Zone 1. Furthermore, buildings of the three heights had an average overstrength 165.9% higher in Zone 1 than in Zone 4. These observations have a significant implications for the seismic design codes which currently do not take into account the variation of the response reduction factor, R (i.e., ductility reduction factor times overstrength).     

Cycle anatomy and variability in the storm-dominated type cincinnatian (Upper Ordovician): coming to grips with cycle delineation and genesis

Although parasequence and sequence are scale-independent terms, they are frequently applied only to specific scales of cycles. For example, meter-scale cycles are commonly assumed to be parasequences or PACs. In the Upper Ordovician Kope and Fairview Formations of northern Kentucky, we examined a succession of 50 meter-scale cycles that have been variously interpreted as deepening-upward, shallowing-upward, or showing no relationship with water depth. Our analysis shows that these cycles, characterized by shifts in storm-bed proximality, are highly variable in their thickness and internal construction. Most cycles are best considered high-frequency sequences, because deepening-upward intervals are common, and many cycles contain evidence of abrupt basinward shifts in facies as expected at sequence boundaries. A minority fit the parasequence model of shallowing-upward cycles bounded by flooding surfaces. Larger, 20 m scale cycles are defined by systematic thickening and thinning trends of meter-scale cycles. However, meter-scale cycles do not display any systematic trends in cycle anatomy as a function of position within the 20 m cycles or position within the Kope and Fairview Formations. The high cycle variability and the lack of systematic stratigraphic organization with respect to longer-term cyclicity reflect either the irregularity of relative sea-level changes, the poor recording of sea-level changes in this deep-water setting, or the generation of these cycles by climate-induced cyclicity in storm intensity. These three mechanisms would generate similar patterns at the outcrop scale, so it is not possible at the present to distinguish between them.     

Evidence of ancient life at 207 m depth in a granitic aquifer

The results of electron-microscopy investigations of calcite precipitated in a water-conducting fracture in a ca. 1800 Ma granitic rock from 207 m below sea level at the island of Aspo on the southeastern (Baltic) coast of Sweden are compared with measurements of carbon, oxygen, and sulfur isotope composition of the calcite and embedded pyrite. Parts of the calcite had extremely low delta 13C values, indicative of biological activity, and contained bacteria-like microfossils occurring in colonies and as typical biofllms. X-ray microanalysis demonstrated these fossils to be enriched in carbon. Our results provide evidence for ancient life in deep granitic rock aquifers and suggest that the modern microbial life found there is intrinsic. Modeling historical and present geochemical processes in deep granitic aquifers should, therefore, preferably include biologically catalyzed reactions. The results also suggest that the search for life on other planets, e.g., Mars, should include subsurface material.     

Investigation by backscatter radar of artificial irregularities produced in ionospheric plasma heating experiments

The artificial ionospheric turbulence occurs in the ionosphere illuminated by high power HF radio waves. There are a lot of irregularities stretched along the geomagnetic field in this region. The investigation of the artificially disturbed ionospheric region is based on the reception of back scattered signals (BSS) which permits the basic parameters of this region to be estimated and its inhomogeneous structure to be described.Experiments were carried out using ‘Sura’ heating facility in the frequency range of ? = 4.7–9 MHz (ordinary mode) with the effective radiated power P_eff = 50–70 MW beamed vertically upwards. The most important dynamic and statistical BSS characteristics (the built-up time, the relaxation and autocorrelation times, the BSS amplitude spatial correlation function and power spectra) were measured using probe waves in the frequency range of that made it possible to obtain the basic parameters of the artificial irregularities. The model representation of a disturbed region in a form of a periodic structure gives a possibity to evaluate the scale of the structure, the whole size of the disturbance and its power and to calculate the main BSS characteristics.