3D seismic technology: the geological 'Hubble'

The proliferation of three‐dimensional (3D) seismic technology is one of the most exciting developments in the Earth Sciences over the past century. 3D reflection seismic data provide interpreters with the ability to map structures and stratigraphic features in 3D detail to a resolution of a few tens of metres over thousands of square kilometres. It is a geological ‘Hubble’, whose resolving power has already yielded some fascinating (and surprising) insights and will continue to provide a major stimulus for research into geological processes and products for many decades to come. Academic and other research institutions have a major role to play in the use of this data by exploiting the enormous volume of geological information contained in 3D seismic surveys. This paper reviews some of the recent advances in basin analysis made using the medium of 3D seismic data, focusing on the fields of structural and sedimentary geology, fluid–rock interactions and igneous geology. It is noted that the increased resolution of the 3D seismic method provided the essential catalyst necessary to stimulate novel observations and discover new geological structures such as mud diapir feeders, km‐long gas blow‐out pipes, giant pockmarks and sandstone intrusions, and to capture the spatial variability of diagenetic fronts. The UKs first impact crater was also discovered using 3D seismic data. The potential for future developments in this field of geophysical interpretation is considerable, and we anticipate that new discoveries will be made in many years to come.     

A subsurface evacuation model for submarine slope failure

Analysis of three-dimensional (3D) seismic reflection data from the Norwegian continental margin provides an insight into an unusual, buried submarine slope failure, which occurred adjacent to the later Holocene-age Storegga Slide. The identified failure, informally named the 'South Vøring Slide' (SVS), occurs in fine-grained hemipelagic and contourite sediments on a slope of 0.5°, and is characterised by a deformed seismic facies unit consisting of closely spaced pyramidal blocks and ridges bound by small normal faults striking perpendicular to the slope. The SVS contrasts with other previously described submarine slope failures in that it cannot be explained by a retrogressive model. The defining characteristic is the high relative volume loss. The area affected by sliding has thinned by some 40%, seen in combination with very modest extension in the translation direction, with line length balancing yielding an extension value of only 4.5%. The volume loss is explained by the mobilisation of an approximately 40 m thick interval at the lower part of the unit and its removal from beneath a thin overburden, which subsequently underwent extensional fragmentation. Evidence for the mobilisation of a thick fine-grained interval in the development of a submarine slope failure from a continental margin setting may have implications for the origins of other large-scale slope failures on the Norwegian margin and other glacially influenced margins worldwide.     

Cretaceous continental margin evolution revealed using quantitative seismic geomorphology,offshore northwest Africa

The application of high‐resolution seismic geomorphology, integrated with lithological data from the continental margin offshore The Gambia, northwest Africa, documents a complex tectono‐stratigraphic history through the Cretaceous. This reveals the spatial‐temporal evolution of submarine canyons by quantifying the related basin depositional elements and providing an estimate of intra‐ versus extra‐basinal sediment budget. The margin developed from the Jurassic to Aptian as a carbonate escarpment. Followed by, an Albian‐aged wave‐dominated delta system that prograded to the palaeo‐shelf edge. This is the first major delivery of siliciclastic sediment into the basin during the evolution of the continental margin, with increased sediment input linked to exhumation events of the hinterland. Subaqueous channel systems (up to 320 m wide) meandered through the pro‐delta region reaching the palaeo‐shelf edge, where it is postulated they initiated early submarine canyonisation of the margin. The canyonisation was long‐lived (ca. 28 Myr) dissecting the inherited seascape topography. Thirteen submarine canyons can be mapped, associated with a Late Cretaceous‐aged regional composite unconformity (RCU), classified as shelf incised or slope confined. Major knickpoints within the canyons and the sharp inflection point along the margin are controlled by the lithological contrast between carbonate and siliciclastic subcrop lithologies. Analysis of the base‐of‐slope deposits at the terminus of the canyons identifies two end‐member lobe styles, debris‐rich and debris‐poor, reflecting the amount of carbonate detritus eroded and redeposited from the escarpment margin (blocks up to ca. 1 km³). The vast majority of canyon‐derived sediment (97%) in the base‐of‐slope is interpreted as locally derived intra‐basinal material. The average volume of sediment bypassed through shelf‐incised canyons is an order of magnitude higher than the slope‐confined systems. These results document a complex mixed‐margin evolution, with seascape evolution, sedimentation style and volume controlled by shelf‐margin collapse, far‐field tectonic activity and the effects of hinterland rejuvenation of the siliciclastic source.     

Giant sandstone pipes record basin-scale liquefaction of buried dune sands in the Middle Jurassic of SE Utah

Giant sandstone pipes crop out over a 20 000 km² area of SE Utah. They range from metres to decametres in diameter and crosscut more than 100 m of continental sediments. New and published observations, encompassing all known pipe localities in SE Utah, suggest that the pipes formed by upward movement of groundwater, sand and sediment blocks in response to liquefaction of buried dune sands. Pipe formation was most likely triggered by seismicity during a phase of Cordilleran shortening and regional tectonic reorganization in the late Middle Jurassic. The depth of liquefaction recorded by the pipes far exceeds depths usually considered in earthquake engineering.     

‘Bulls-eye’ pockmarks and polygonal faulting in the Lower Congo Basin: Relative timing and implications for fluid expulsion during shallow burial

This study describes a new type of pockmark association from the Lower Congo Basin offshore West Africa, consisting of up to 8 stacked paleopockmarks separated by intervals of drape and onlap fill. The stacked paleopockmarks occur within the depocentres of polygonally-faulted Plio-Pleistocene sediments and are distributed evenly in the downslope parts of two salt mini-basins. The majority of the stacked pockmarks initiated synchronously in the late Pliocene (~ 3 Ma) with a subordinate initiation phase in the mid Pliocene (~ 4 Ma). The primary agents in pockmark formation are interpreted to be pore water expelled during early-stage compaction together with biogenic methane. Bottom simulating reflections (BSRs) associated with free gas overlain by gas hydrates are currently found in the area. It is speculated that biogenic methane accumulated within and below a clathrate cap, which was repeatedly breached, forming pockmarks at discrete horizons separated by intervals of draping sedimentation. The mid and late Pliocene pockmark initiations appear to coincide with sea-level falls following periods of relatively stable highstand conditions. Several subsequent pockmark horizons may similarly correlate with subsequent sea-level falls during the late Pliocene and early Pleistocene. The stacked paleopockmarks are completely surrounded by polygonal faults and consistently occur within polygonal fault cells that crosscut the succession containing the stacked pockmarks. Early-stage compaction and dewatering of the Pliocene sediments thus preceded polygonal faulting, providing a constraint on the conditions leading to polygonal faulting of the fine-grained host sediments. The relationship documented here is interpreted as due to the presence of a hydrate cap in the Plio-Pleistocene mini-basins which may have retarded the normal compaction processes and facilitated pockmark formation by allowing the build up of gas hydrate and free gas in the basin centres. The relative timing and spatial relationships implies that fluids expelled due to polygonal faulting were not implicated in pockmark formation in this area.     

Field Application of the Combined Membrane‐Interface Probe and Hydraulic Profiling Tool (MiHpt)

The Membrane‐Interface Probe and Hydraulic Profiling Tool (MiHpt) is a direct push probe that includes both the membrane interface probe (MIP) and hydraulic profiling tool (HPT) sensors. These direct push logging tools were previously operated as separate logging systems for subsurface investigation in unconsolidated formations. By combining these two probes into one logging system the field operator obtains useful data about the distribution of both volatile organic contaminants (VOCs) and relative formation permeability in a single boring. MiHpt logging was conducted at a chlorinated VOC contaminated site in Skuldelev, Denmark, to evaluate performance of the system. Formation cores and discrete interval slug tests are used to assess use of the HPT and electrical conductivity (EC) logs for lithologic and hydrostratigraphic interpretation. Results of soil and groundwater sample analyses are compared to the adjacent MiHpt halogen specific detector (XSD) logs to evaluate performance of the system to define contaminant distribution and relative concentrations for the observed VOCs. Groundwater profile results at moderate to highly contaminated locations were found to correlate well with the MiHpt‐XSD detector responses. In general, soil sample results corresponded with detector responses. However, the analyses of saturated coarse‐grained soils at the site proved to be unreliable as demonstrated by high RPDs for duplicate samples. The authors believe that this is due to pore water drainage observed from these cores during sampling. Additionally, a cross section of HPT pressure and MiHpt‐XSD detector logs provides insight into local hydrostratigraphy and formation control on contaminant migration.     

Optimal carbon dioxide abatement and technological change: should emission taxes start high in order to spur R&;D?

Many European politicians argue that the EU should set tougher emission targets than what is required by the Kyoto protocol, and moreover, that emission trading with other countries outside EU should be limited so as to keep emission quota prices high. One of the arguments, frequently cited for such a policy, is the need for technological development. However, the literature on climate change and technological innovation does not unambiguously support the need for setting high emission taxes today. In this paper we investigate the relationship between emission taxes and technological change further by modeling innovation activity explicitly. In our model both the amount of R&D and the amount of carbon abatement are decided in a decentralized way by the market as a response to an emission tax. Moreover, we introduce several distinct failures in the market for new innovations, among others, insufficient patent protection and intertemporal knowledge spill-overs. Our findings suggest that governments should under some circumstances set a higher carbon tax today if we have technological change driven by R&D than if we have pure exogenous technological change. Based on numerical simulations these circumstances are (a) positive intertemporal knowledge spillovers and/or (b) weak patent protection.     

Trends and variability of sea ice in Baffin Bay and Davis Strait, 1953–2001

The extent and duration of sea ice in Baffin Bay and Davis Strait has a major impact on the timing and strength of the marine production along West Greenland. The advance and retreat of the sea ice follows a predictable pattern, with maximum extent typically in March. We examine the area of sea ice in March in three overlapping study regions centred on Disko Bay on the west coast of Greenland. Sea ice concentration estimates derived from satellite passive microwave data are available for the years 1979-2001. We extend the record back in time by digitizing ice charts from the Danish Meteorological Institute, 1953-1981. There is reasonable agreement between the chart data and the satellite data during the three years of overlap: 1979-1981. We find a significant increasing trend in sea ice for the 49-year period (1953-2001) for the study regions that extend into Davis Strait and Baffin Bay. The cyclical nature of the wintertime ice area is also evident, with a period of about 8 to 9 years. Correlation of the winter sea ice concentration with the winter North Atlantic Oscillation (NAO) index shows moderately high values in Baffin Bay. The correlation of ice concentration with the previous winter's NAO is high in Davis Strait and suggests that next winter's ice conditions can be predicted to some extent by this winter's NAO index.