Remote leveling of tide gauges using GNSS reflectometry: case study at Spring Bay,Australia

We further developed a new approach using GNSS reflectometry to determine the leveling connection between a tide gauge and a GNSS antenna. This approach includes the optimization of the unknown receiver bandwidth and the estimation of frequency changes in the signal-to-noise ratio (SNR) oscillation through an extended Kalman filter/smoother algorithm. We also corrected the geometric bending of the GNSS signals due to tropospheric refraction using local meteorological observations. Using 3 weeks of SNR data in Spring Bay, Australia, from a GNSS antenna placed sideways (i.e., ground plane orientated vertically and directed in azimuth toward the sea surface) to improve the SNR interference near the horizon, we obtained mean leveling differences of approximately 5 mm, with an RMS of approximately 3 cm level with respect to the nominal leveling from classical surveying techniques. SNR data from three different receiver manufacturers, coupled to the same antenna, provided similar leveling results. With a second antenna in the usual upright configuration, we obtained mean leveling differences of 1–2 cm and a RMS of about 10 cm. In the upright configuration, the leveling differences may include errors in the GNSS antenna phase center calibration, which are avoided in our technique but not in the classical surveying techniques. These results demonstrate the usefulness of the reflectometry technique to obtain precisely and remotely the leveling between a GNSS antenna and a tide gauge. In addition, this technique can be applied continuously, providing an independent and economical means to monitor the stability of the tide gauge zero.     

Climatic zoning for the calculation of the thermal demand of buildings in Extremadura (Spain)

The present work reports on a methodology to assess the climatic severity of a particular geographic region as compared to specific information available in the current regulations. The viability for each of the 387 municipalities in the Autonomous Community of Extremadura (Spain) is analysed, making a distinction between those with reliable climate reports and those for which no such information is available. In the case study, although the weather conditions in Extremadura are quite homogeneous according to the Spanish Technical Building Code (STBC 2015) classification and most areas are associated to zone C4 (soft winters and hot summers), the southern area in the region is associated to zone D1, similar to the north of Spain, where winters and summers are cool, which does not coincide with the actual climate in the south of Extremadura. The general climatic homogeneity in Extremadura was also highlighted with the new procedure, predominating zone C4, but unexpected or unreal climatic zoning was not generated, giving place to a consistent spatial distribution of zones throughout the region. Consequently, the proposed method allows a more accurate climatic zoning of any region in agreement with the Spanish legislation on energy efficiency in buildings, which would enhance the setting of thermal demand rates according to the actual climatic characterisation of the area in which a particular municipality is located.     

Windstorm of the eighteenth century in the Czech Lands: course,extent, impacts

Theoretical and Applied Climatology - This paper addresses the course, extent, and impacts of a windstorm that occurred on 20–21 December 1740, in the Czech Lands. The analysis is based on...     

Testing spatial heterogeneity in geographically weighted principal components analysis

We propose a method to evaluate the existence of spatial variability in the covariance structure in a geographically weighted principal components analysis (GWPCA). The method, that is extensive to locally weighted principal components analysis, is based on performing a statistical hypothesis test using the eigenvectors of the PCA scores covariance matrix. The application of the method to simulated data shows that it has a greater statistical power than the current statistical test that uses the eigenvalues of the raw data covariance matrix. Finally, the method was applied to a real problem whose objective is to find spatial distribution patterns in a set of soil pollutants. The results show the utility of GWPCA versus PCA.     

Galileo Constellation Design

A significant effort has been carried out in Europe to define the European Global Navigation Satellite System (GNSS), named Galileo Satellites flying in Medium Earth Orbits (MEO) will compose the system (according to the most recent architecture definition baseline); a regional complement of geosynchronous satellites may be required to increase performances over Europe and maybe also to provide some specific communication services. Nominal medium performances are envisaged, but they will be increased by means of augmentation systems (local or wide area), or even by using simultaneously other GNSSs such as GPS. All the involved requirements make the design process quite complex. A powerful software tool, Elcano, has been developed for this purpose; its capabilities will be outlined, and the results of the design process will be presented. ? 2001 John Wiley & Sons, Inc.     

Late Cenozoic magnetostratigraphy (11 – 0 Ma) of the Dongshanding and Wangjiashan sections in the Longzhong Basin,western China

A paleomagnetic study of the 510-m-thick Wangjiashan section of Late Miocene and Pliocene terrestrial sediments reveals a fairly complete reversal record with ages from 11 to 1.8 Ma. The magnetostratigraphy of the Dongshanding section, located nearby, reveals a partially overlapping reversal record with ages from 2.2 to 0 Ma, and facilitates correlation of the Wangjiashan section with the global polarity time scale. A new stratigraphic division of the Wangjiashan section replaces the name Linxia formation by five new formation names, based on lithologic variation and mammalian fossil finds. The new formations and their magnetostratigraphically determined ages are: Dongshan Formation (c. 1.75–2.6 Ma), Jishi Fm. (c. 2.6–3.6 Ma), Hewangjia Fm. (4.5–6.0 Ma), Liushu Fm. (6.0–7.6 Ma), and Dongxiang Fm. (7.6–c. 12 Ma). The Neogene stratigraphy and fossil mammals suggest that the nearby part of the Tibetan Plateau experienced a persistent denudation during the Late Miocene and Early Pliocene, but that it was uplifted more rapidly at about 3.6 Ma.     

The mercury problem in the Amazon due to gold extraction

The environmental impacts caused by the use of mercury (Hg), as a gold (Au) amalgam, in gold extraction in three geographical areas located in the Brazilian wetlands (Poconé) and the Amazon (Alta Floresta and Itaituba), are reviewed and solutions proposed.     

Metallogeny,structural, lithological and time controls of ore deposition in anoxic environments

Accumulation of metals in anoxic environments occurs by sorption and precipitation from seawater, fossil brines or hydrothermal solutions. Metals can be remobilized during subsequent metamorphic and magmatic processes and form ore deposits. This type of mineralization is governed chiefly by the type of tectonic setting of the anoxic environment. Carbonaceous sediments of passive margins contain only subeconomic concentrations of uranium, vanadium and molybdenum. Cubearing black shales and the submarine-exhalative type of mineralization are confined to the environments of continental rifts and aulacogens or to back-arc basins of active margins. Metamorphogenic deposits are mainly connected with collision margins but they may also occur in other types of tectonic environments. The formation of Cu-bearing black shales was controlled by period of low sea-level during the break-up of supercontinents in the Earth's evolution. Increased contents of uranium and vanadium accumulated in black shales in periods of sealevel highstands. Lithological control is apparent in deposits of Cu-bearing and uraniferous black shales. On the contrary, the occurrence of polymetallic mineralization does not depend on the lithological maturity of carbonaceous sediments.     

Computer estimation of intensities: The 1985 Berhida,Hungary, earthquake

In this paper a computerized method for the intensity estimation from macroseismic observations is presented. The successive steps of the MSK intensity scale (2° to 10°) receives weights according to the observations marked on the earthquake questionnaires. These weights are summed for the individual scale steps. The distribution of these summed weights and their relation to an experimentally chosen function of the criterion make it possible to estimate the appropriate intensity value and its reliability. By computer evaluation of earthquake reports an objective comparison of estimated intensities given by different seismologists can be made, provided that uniform earthquake questionnaires are used. The application of this method will result in more homogeneous intensity data.