A comparative mineralogical study of gas-related sediments of the Gulf of Cádiz

The Gulf of Cádiz area has been extensively surveyed in recent years and several gas-related fluid escape seafloor structures have been identified. In this study, gravity cores, collected during the ANASTASYA/00 and ANASTASYA/01 cruises, on mud volcanoes, hemipelagic sediments and dredged material from diapiric structures, have been studied. A comparative mineralogical analysis by XRD and SEM of samples from different areas has been performed in order to determine whether there is a characteristic mineralogy related to these fluid escape structures, and also to determine the origin of the mud matrix and constrain the depth of the parent units. The mineralogical analysis reflects the different origins of the different units described in the cores: hemipelagic material of the slope, clays that underlie the mud volcanoes and are discharged at the sea bottom surface, and authigenic and diagenetic minerals possibly involved in the anaerobic oxidation of methane in the mud volcano sediments.     

The Huelva (Spain) Tsunami-Ready Station and Its Interaction with Storm Emma (March 2018)

Abstract

The sea level station operating since 1996 at Mazagón (Huelva, Spain) has been progressively upgraded to fit tsunami warning requirements, due to its location in one of the main regions at risk. Its radar water level sensor was complemented in 2017, with the addition of a pressure sensor. The performance of both sea level sensors and their response to sea level oscillations, at different frequencies, is assessed. Particular emphasis is put on the effect of extreme events, such as Storm Emma, when alternative methods to obtain 1-min data are tested, in contrast to the one based on arithmetic means. The overall differences are small, for the whole period of study (centered-root-mean-square-error below 1?cm, for 5-min, and hourly data; similar tidal parameters and sea level oscillations with periods between 30?s and 5?min). However, during Storm Emma, the pressure sensor presents sensibly lower readings than the radar, with the centered-root-mean-square-error rising to 80?mm on the March 2^nd 2018. A new method to compute 1-min data, based on medians, reduced this value to 10?mm for the same day.     

Evidence for sinistral strike-slip deformation in The Solomon Island arc

During the SOPACMAPS 2 crusie carried out by IFREMER (Institut Français de Recherche pour l'Exploitation de la Mer) and ORSTOM (Institut Français de Recherche Scientifique pour le dévelopement en Coopération) on theR/V L'Atalante, in the Central Solomon Arc area, multibeam bathymetric and imagery data and single-channel seismic reflection profiles were collected from an area of about 3500 km², to evaluate regional tectonics. Structural data geophysical profiles interpretation provide evidence for left-lateral transtensional tectonics on the southern edge of the Central Solomon Trough. This transtensional deformation is represented by faulting, block tilting, and rhombohedral deformation. The regional geology and the analysis of the sedimentary cover allow us to demonstrate that this tectonic occurred in two different phases during Oligocene to Miocene and Pliocene to Pleistocene times.     

Miocene extensional detachments in the outcropping basement of the northern Alboran Basin (Betics) and their tectonic implications

Whether or not there are extensional detachment faults in the Alboran basement can be tested directly because a part of the Alboran Basin is now emerged. These detachments, related to crustal thinning beneath the Alboran Basin, occurred from the Aquitanian to Tortonian. The resulting extensional geometries can be described in general terms. During the Serravalian a considerable southwest extension of the basin took place, accompanied by south-southeast extension in the northern Gibraltar Arc. Other detachments affected by Serravalian extension can be found. The spreading of the Alboran was nearly coeval with roughly westward migration of the Gibraltar mountain front.     

Stratigraphic framework of gas accumulations in the Ría de Pontevedra (NW Spain)

Knowledge of marine geological environments in which shallow gas is accumulating is becoming increasingly important in global studies of climate change because a measurable proportion of the total methane source comes from continental margins. Previous studies have revealed that coastal environments represent important geological environments where microbial methane is being generated, is accumulating, and is being released. In the Ría de Pontevedra, at least 4.5 km² of seafloor in the innermost part of the ría is underlain by sediments containing natural gas. Seismic interpretation contributes new findings for the definition of periods and geological environments in which the gas could have been generated, and is accumulating and released in the Ría de Pontevedra. Groundtruthing the seismic data (facies, environments) makes it possible to identify favourable geological environments for gas generation in the sedimentary infill of the Ría de Pontevedra. Sequence stratigraphy based on high-resolution seismic profiles and post-Last Glacial Maximum sea-level records makes it possible to establish the stratigraphic architecture of the ría and to define the periods in which gas could have been generated. The results of this study show that the sedimentary infill is composed of a fifth-order sequence developed since the Last Glacial Maximum. Within this sequence, gas appears to have accumulated in the Holocene deposits associated with the latest transgressive and highstand system tracts. Seismic analysis shows that gas could have been generated in different geological environments in the Ría de Pontevedra. If coastal environments at times of lower sea level were similar to those of the present, organic-rich mud deposits (deposited mainly in lakes, estuaries and floodplains) could have survived transgression and remained buried as potential gas sources in the inner part of the ría.     

Spin rate estimation of sounding rockets using GPS wind-up

Carrier phase wind-up is a well-known effect that arises from the relative rotation between a transmitting and receiving antenna. In GPS measurements at L1 frequency, this effect translates into an error of 19.029 cm per full relative rotation of antennas. Since this effect is independent of the satellite elevation for pure rotation about the antenna boresight axis, it is usually absorbed by the clock estimation in navigation algorithms. Therefore, the impact of wind-up is usually neglected for applications that do not require accuracies to the cm level like RTK. However, in receiving platforms with high rotation rate, the accumulated wind-up value can be important and actually be larger than receiver noise or even ionospheric variations. Therefore, in such scenarios, the wind-up contribution can be isolated and used as a source of information to compute the spin rate of such platforms using an appropriate combination of GPS observables. This work shows some results of a coarse, yet simple, approach to monitor the rotation angle and spin-rate of spin stabilized sounding rockets flown by DLR.     

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.