人造导引星自适应光学的倾斜决定问题

本文从Zernike多项式出发 ,推导了激光导引星自适应光学倾斜校正的非等晕性方差 ,以其方差 1rad2 为判据 ,导出了倾斜等晕角的表达式 ,得出了与Parenti和Sasiela推导的相同的结果     

差分法周跳探测与修复方法改进

在目前常用的周跳探测与修复方法基础上 ,提出了首先将观测资料按照观测历元不连续分成若干小弧段 ,然后利用差分法进行周跳探测 ,根据差分后周跳放大的特性判断周跳和野值 ,并确定其位置利用宽带组合和电离层组合的方法解算周跳大小。通过实例验证了其有效性。     

Application of Grain Size Analysis to Study Sedimentary Environment of Sand Dune in the Vicinity of Tumen River

The dunes in estuary of Tumen River in China lie to the area between the Jiushaping and Fangchuan in the left bank of Tumen River (Fig.1). The dis-tance is about 15～20 km between the dunes and the coast. It ranges from China to D. P. R. Korea and Russia. The range of the height of dunes is about 15～20 m and the width is 100～200 m. By the re-connaissance, we protracted 9 section planes of the dunes and collected 40 sand samples of the dunes, and identified the sedimentary environment …     

Effect of spatial variation characteristics on contouring of design storm depth

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.     

Multistep matched-field inversion for broad-band data from ASIAEX2001

This paper discusses the results of geoacoustic inversion carried out using explosive charge data from the Asian Seas International Acoustic Experiment (ASIAEX) East China Sea (ECS) Experiment. A multifrequency incoherent matched-field inversion processor and a genetic algorithm (GA) are used for the inversion. A multistep matched field inversion approach is presented, which makes use of the varying sensitivities of wave fields at various frequencies to reduce the inversion problem into a sequence of smaller inversions with fewer unknowns to estimate at each stage. Different parameters are estimated using data at different frequencies according to their sensitivities. Inversion results for different areas in the ECS region are summarized and compared with core data.     

Tidal effects on temperature front in the Yellow Sea

Temperature front (TF) is one of the important features in the Yellow Sea, which forms in spring, thrives in summer, and fades in autumn as thermocline declines. TF intensity ⋎S _T ⋎ is defined to describe the distribution of TF. Based on the MASNUM wave-tide-circulation coupled model, temperature distribution in the Yellow Sea was simulated with and without tidal effects. Along 36°N, distribution of TF from the simulated results are compared with the observations, and a quantitative analysis is introduced to evaluate the tidal effects on the forming and maintaining processes of the TF. Tidal mixing and the circulation structure adapting to it are the main causes of the TF. Supported by the National Basic Research Program of China (No. G1999043809) and the National Science Foundation of China (No. 49736190).     

A New Solar Radio Spectrometer at 1.10-2.06 GHz and First Observational Results

An improved Solar Radio Spectrometer working at 1.10-2.06 GHz with much improved spectral and temporal resolution, has been accomplished by the National Astronomical Observatories and Hebei Semiconductor Research Institute, based on an old spectrometer at 1-2 GHz. The new spectrometer has a spectral resolution of 4 MHz and a temporal resolution of 5ms, with an instantaneous detectable range from 0.02 to 10 times of the quiet Sun flux. It can measure both left and right circular polarization with an accuracy of 10% in degree of polarization. Some results of preliminary observations that could not be recorded by the old spectrometer at 1-2 GHz are presented.     

青海省沙柳河南区有色金属矿成矿物质来源及矿床成矿模式探讨

本文简述了沙柳河南区有色金属矿床的基本特征。通过对成矿热液及成矿物质的来源与性质的研究,认为该矿床的成因类型为火山沉积—接触交代改造叠加型,进而探讨了该矿床的成矿模式。     

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.