基于等高线的DEM生成算法研究和实现

数字高程模型是近年来发展起来的为地理信息系统提供空间分析和辅助决策的数据基础。随着科学技术特别是计算机技术的迅速发展，DEM在数据获取方法、数据存储和数据处理速度等方面已经取得突破性进展。通过系统介绍生成DTM过程中等高线的离散化方法，DELAUNAY三角网的特性和基于等高线数据的TIN的建立，以及对产生的问题的一些解决方法。     

一种改进的MODIS影像BRDF辐射校正方法

针时二向性造成的辐射失真，在核驱动模型的基础上提出了一种改进的二向性反射分布模型，并通过时MODIS影像的试验，得到了减弱辐射差异的较好效果，并对试验结果进行了分析和评价。     

Impact of land-cover and climate changes on runoff of the source regions of the Yellow River

After dividing the source regions of the Yellow River into 38 sub-basins, the paper made use of the SWAT model to simulate streamflow with validation and calibration of the observed yearly and monthly runoff data from the Tangnag hydrological station, and simulation results are satisfactory. Five land-cover scenario models and 24 sets of temperature and precipitation combinations were established to simulate annual runoff and runoff depth under different scenarios. The simulation shows that with the increasing of vegetation coverage annual runoff increases and evapotranspiration decreases in the basin. When temperature decreases by 2oC and precipitation increases by 20%, catchment runoff will increase by 39.69%, which is the largest situation among all scenarios.     

2004年陕西春季沙尘天气环流特征分析

应用我们已经建立的《阳泉市短期冰雹预报系统》分析预报阳泉市2004年6月份出现的连续冰雹天气,特别是该系统中的指标叠加方法,效果较好。     

2003年9月19日陕西暴雨分析

利用太原地区发生的798个地质灾害个例和汛期降水资料,从地质环境背景着手,在地理信息系统(MAPGIS)支持下,对太原地质灾害危险性区划和诱发因素进行了系统研究。提出了精细的地质环境概率量化评价方法,得出了地质灾害影响因素的重要结论。建立了地质灾害预报模型,制定了预报等级标准和预报规则。经业务试验,预报结果与实况基本吻合。     

不同降水天气系统自然降水特征及火箭人工增雨潜力分析

统计分析了1981~2000年20年中15种降水天气系统影响下河北地区自然降水特征,并对火箭人工增雨的潜力进行了初步分析。统计分析表明:西来槽类、高空低涡类、冷锋、切变线和副高后部等天气系统是影响河北地区的主要降水系统,其降雨量和降雨日数占到了90%以上;不同的天气系统在不同季节对降水的贡献有所不同,其中西来槽类的降雨量和降雨日数均居首位,开展人工增雨催化作业机会最多;夏季降水系统最强,云水资源最为丰富,人工增雨潜力很大,是开展火箭人工增雨催化作业的最佳季节,春秋两季增雨潜力明显比夏季小,冬季最小;倒槽、副高后部、台风低压、高空低涡类和气旋类等系统最强,日降雨量和单位面积降雨量明显比其它系统大,尤其对蓄水型火箭增雨作业十分有利。     

基于二维小波变换的FMI图象分割

为了从FMI资料中定量提取参数，一个重要的步骤是从实际FMI资料中分离出反映溶孔、溶洞、裂缝的子图像。本文给出的方法，考虑图像像元邻域的特征，应用二维小波变换求出目标与背景边缘的点集，按这个边缘点集的坐标点所对应的原图像像素灰度值的平均值作为分割阈值进行图像分割。实际资料处理表明，应用这种方法可以从实际的FMI资料中准确地分割出孔洞、裂缝的子图像并且可以按深度段连续自动处理，为后续定量计算参数奠定了良好基础。     

Real-time simulation of ground displacement by digital accelerograph record

Introduction The observation records of strong ground motion previously, on the one hand, supplied basicdata both to research on earthquake engineering and to constitute the criterion of aseismatic de-signing of all project structures; on the other hand, it provided important information for the re-search on the process of epicenter burst in seismology. With the development of research on strongground motion observation, especially the development of the new generation accelerograph,which…     

Major reactive species of ambient volatile organic compounds (VOCs) and their sources in Beijing

Volatile organic compounds (VOCs) are important precursors of atmospheric chemical processes. As a whole mixture, the ambient VOCs show very strong chemical reactivity. Based on OH radical loss rates in the air, the chemical reactivity of VOCs in Beijing was calculated. The results revealed that alkenes, accounting for only about 15% in the mixing ratio of VOCs, provide nearly 75% of the reactivity of ambient VOCs and the C4 to C5 alkenes were the major reactive species among the alkenes. The study of emission characteristics of various VOCs sources indicated that these alkenes are mainly from vehicle exhaust and gasoline evaporation. The reduction of alkene species in these two sources will be effective in photochemical pollution control in Beijing.     

Anisotropy from full waveform inversion of multicomponent seismic data using a hybrid optimization method

Seismic waveforms contain valuable information about the media, but the waveform inversion is a non‐linear problem. We present a waveform inversion method that combines a local optimization method with a genetic algorithm to determine the anisotropic parameters of a horizontally stratified medium. Synthetic seismograms for a horizontally stratified anisotropic medium are calculated using the reflectivity technique. In the initial stage of the inversion, the global space‐sampling properties of the genetic algorithm are used to direct the search to the region close to the global solution. This solution is then further improved using a conjugate‐gradient method. The numerical experiments performed with noisy synthetic data show that our hybrid optimization method satisfactorily reconstructs the anisotropic parameters at a reasonable computing cost while the range of slowness is adequate. We found that (i) for small‐angle data neither single‐ nor multiple‐component data are sufficient to determine the anisotropic parameters uniquely; (ii) for medium‐angle data the multiple‐component data are sufficient to determine the anisotropic parameters exactly whereas the single‐component data are not sufficient; and (iii) for wide‐angle data, either single‐ or multiple‐component data are sufficient to determine the anisotropic parameters accurately.