The impact load (equivalent impact height) applied to deep-sea sediment by a walking mining machine was first deduced by the energy conservation principle, and the simulative soil was prepared based on the deep-sea sediment collected from the Pacific C-C mining area. The self-designed impact compressive creep tests of the simulative soil were conducted under different ground stresses and impact heights, in order to determine impact compressive creep parameters using a K-H rheological model. Test results show that the impact compressive creep curves have three similar creep stages (transient creep, unstable creep, and stable creep) to static compressive creep curves, where the transient creep deformation and total deformation at the unstable creep stage decrease with the impact load. Among the three impact compressive creep parameters (K1, K2, β) of the simulative soil, K1 is first increased with impact height and finally fluctuated to a certain stable value, while K2 and β are approximately linearly increased with impact height. The maximum subsidence of the mining machine under a specific designed ground stress and walking velocity predicted by the impact compressive creep constitutive equation can be used for safety assessment of the mining machine. 相似文献
The modern fishery stock assessment could be conducted by various models, such as Stock Synthesis model with high data requirement and complicated model structure, and the basic surplus production model, which fails to incorporate individual growth, maturity, and fishery selectivity, etc. In this study, the Just Another Bayesian Biomass Assessment (JABBA) Select which is relatively balanced between complex and simple models, was used to conduct stock assessment for yellowfin tuna (Thunnus albacares) in the Atlantic Ocean. Its population dynamics was evaluated, considering the influence of selectivity patterns and different catch per unit effort (CPUE) indices on the stock assessment results. The model with three joint longline standardized CPUE indices and logistic selectivity pattern performed well, without significant retrospective pattern. The results indicated that the stock is not overfished and not subject to overfishing in 2018. Sensitivity analyses indicated that stock assessment results are robust to natural mortality but sensitive to steepness of the stock-recruitment relationship and fishing selectivity. High steepness was revealed to be more appropriate for this stock, while the fishing selectivity has greater influence to the assessment results than life history parameters. Overall, JABBA-Select is suitable for the stock assessment of Atlantic yellowfin tuna with different selectivity patterns, and the assumptions of natural mortality and selectivity pattern should be improved to reduce uncertainties. 相似文献
During the self-weight penetration process of the suction foundation on the dense sand seabed, due to the shallow penetration depth, the excess seepage seawater from the outside to the inside of the foundation may cause the negative pressure penetration process failure. Increasing the self-weight penetration depth has become an important problem for the safe construction of the suction foundation. The new suction anchor foundation has been proposed, and the self-weight penetration characteristics of the traditional suction foundation and the new suction anchor foundation are studied and compared through laboratory experiments and analysis. For the above two foundation types, by considering five foundation diameters and two bottom shapes, 20 models are tested with the same penetration energy. The effects of different foundation diameters on the penetration depth, the soil plug characteristics, and the surrounding sand layer are studied. The results show that the penetration depth of the new suction foundation is smaller than that of the traditional suction foundation. With the same penetration energy, the penetration depth of the suction foundation becomes shallower as the diameter increases. The smaller the diameter of the suction foundation, the more likely it is to be fully plugged, and the smaller the height of the soil plug will be. In the stage of self-weight penetration, the impact cavity appears around the foundation, which may affect the stability of the suction foundation.
Offshore wind energy resources are operational in cold regions, while offshore wind turbines will face the threat of icing. Therefore, it is necessary to study icing of offshore wind turbines under different icing conditions. In this study, icing sensitivity of offshore wind turbine blades are performed using a combination of FLUENT and FENSAP-ICE software, and the effects of liquid water content (LWC), medium volume diameter (MVD), wind speed and air temperature on blade icing shape are analyzed by two types of ice, namely rime ice and glaze ice. The results show that the increase of LWC and MVD will increase the amount of ice that forms on the blade surface for either glaze ice or rime ice, and an increase of MVD will expand the adhesion surface between ice and blade. Before reaching the rated wind speed of 11.4 m/s, it does not directly affect the icing shape. However, after reaching the rated wind speed, the attack angle of the incoming flow decreases obviously, and the amount of ice increases markedly. When the ambient air temperature meets the icing conditions of glaze ice (i.e., −5°C to 0°C), the lower the temperature, the more glaze ice freezes, whereas air temperature has no impact on the icing of rime ice. Compared with onshore wind turbines, offshore wind turbines might face extreme meteorological conditions, and the wind speed has no impact on the amount of ice that forms on the blade surface for most wind speeds
海洋一号C/D(HY-1C/D)卫星中国海洋水色水温扫描仪(Chinese Ocean Color and Temperature Scanner,COCTS)主要用于探测海洋水色、水温等要素,这些要素需要经过卫星资料处理才能获取,而几何定位是预处理的核心,直接影响这些要素的质量。COCTS具有114°视场角和四元逐点摆扫的特征,据此研究出一套完整的几何定位方法。从0级数据中提取卫星星历,利用插值法从中获取采样时间对应的卫星位置和速度,进而得到轨道(ORB)坐标系到地心旋转(ECR)坐标系的转换矩阵。基于四元逐点摆扫的特征,中心视矢量分别绕X轴、Y轴旋转相应角度,获得扫描行各采样点ORB视矢量,建立视矢量与地球交叉点关系模型,从而对根据波段数据绘制的遥感图像进行地理定位。本文使用插值法替代了传统需要6个轨道根数来计算卫星位置的复杂方法,同时直接计算ORB到ECR的转换矩阵,而不采用传统的两步转换方法。经过多组数据计算及定性定量验证,HY-1C/D COCTS几何定位结果一致;采样像元尺度效应导致从星下点到两侧边缘、从赤道到两极,误差逐渐增大,约在两个像元内。该方法满足一定的定位精度要求,可以用于COCTS的几何定位。 相似文献