Microstructure and thermal history of metal particles in CH chondrites

Abstract We have studied metal microstructures in four CH chondrites, Patuxent Range (PAT) 91546, Allan Hills (ALH) 85085, Acfer 214, and Northwest Africa (NWA) 739, to examine details of the thermal histories of individual particles. Four types of metal particles are common in all of these chondrites. Zoned and unzoned particles probably formed as condensates from a gas of chondritic composition in a monotonic cooling regime, as has been shown previously. We have demonstrated that these particles were cooled rapidly to temperatures below 500 K after they formed, and that condensation effectively closed around 700 K. Zoned and unzoned particles with exsolution precipitates, predominantly high‐Ni taenite, have considerably more complex thermal histories. Precipitates grew in reheating episodes, but the details of the heating events vary among individual grains. Reheating temperatures are typically in the range 800–1000 K. Reheating could have been the result of impact events on the CH parent body. Some particles with precipitates may have been incorporated into chondrules, with further brief heating episodes taking place during chondrule formation. In addition to the four dominant types of metal particles, rare Ni‐rich metal particles and Si‐rich metal particles indicate that the metal assemblage in CH chondrites was a mixture of material that formed at different redox conditions. Metal in CH chondrites consists of a mechanical mixture of particles that underwent a variety of thermal histories prior to being assembled into the existing brecciated meteorites.     

Responsible Geographies: Co-oreating Knowledge in Aotearoa

We examine in this paper the potential for (reforming the relations of social scientific research in Aotearoa. Drawing upon our experience of undertaking historical geographical research with and for Ngati-Toa Rangatira, we argue for the need to develop responsible geographies in Aotearoa. We suggest that the metaphors of ‘crossing borders’ and ‘building structures’ might offer one route into the development of such a responsible geography.     

Desert dust aerosol air mass mapping in the western Sahara, using particle properties derived from space-based multi-angle imaging

Coincident observations made over the Moroccan desert during the Sahara mineral dust experiment (SAMUM) 2006 field campaign are used both to validate aerosol amount and type retrieved from multi-angle imaging spectroradiometer (MISR) observations, and to place the suborbital aerosol measurements into the satellite's larger regional context. On three moderately dusty days during which coincident observations were made, MISR mid-visible aerosol optical thickness (AOT) agrees with field measurements point-by-point to within 0.05–0.1. This is about as well as can be expected given spatial sampling differences; the space-based observations capture AOT trends and variability over an extended region. The field data also validate MISR's ability to distinguish and to map aerosol air masses, from the combination of retrieved constraints on particle size, shape and single-scattering albedo. For the three study days, the satellite observations (1) highlight regional gradients in the mix of dust and background spherical particles, (2) identify a dust plume most likely part of a density flow and (3) show an aerosol air mass containing a higher proportion of small, spherical particles than the surroundings, that appears to be aerosol pollution transported from several thousand kilometres away.     

Regional Saharan dust modelling during the SAMUM 2006 campaign

The regional dust model system LM-MUSCAT-DES was developed in the framework of the SAMUM project. Using the unique comprehensive data set of near-source dust properties during the 2006 SAMUM field campaign, the performance of the model system is evaluated for two time periods in May and June 2006. Dust optical thicknesses, number size distributions and the position of the maximum dust extinction in the vertical profiles agree well with the observations. However, the spatio-temporal evolution of the dust plumes is not always reproduced due to inaccuracies in the dust source placement by the model. While simulated winds and dust distributions are well matched for dust events caused by dry synoptic-scale dynamics, they are often misrepresented when dust emissions are caused by moist convection or influenced by small-scale topography that is not resolved by the model. In contrast to long-range dust transport, in the vicinity of source regions the model performance strongly depends on the correct prediction of the exact location of sources. Insufficiently resolved vertical grid spacing causes the absence of inversions in the model vertical profiles and likely explains the absence of the observed sharply defined dust layers.     

Progressive alteration in CV3 chondrites: More evidence for asteroidal alteration

Abstract— The oxidized CV3 chondrites can be divided into two major subgroups or lithologies, Bali-like (CV3_oxB) and Allende-like (CV3_oxA), in which chondrules, calcium-aluminum-rich inclusions (CAIs) and matrices show characteristic alteration features (Weisberg et al, 1997; Krot et al, 1997d; Kimura and Ikeda, 1997). The CV3_oxB lithology is present in Bali, Kaba, parts of the Mokoia breccia and, possibly, in Grosnaja and Allan Hills (ALH) 85006. It is characterized by the presence of the secondary low-Ca phyllosilicates (saponite and sodium phlogopite), magnetite, Ni-rich sulfides, fayalite (Fa>₉₀), Ca-Fe-rich pyroxenes (Fs_10–50Wo_45–50) and andradite. Phyllosilicates replace primary Ca-rich minerals in chondrules and CAIs, which suggests mobilization of Ca during aqueous alteration. Magnetite nodules are replaced to various degrees by fayalite, Ca-Fe-rich pyroxenes and minor andradite. Fayalite veins crosscut fine-grained rims around chondrules and extend into the matrix. Thermodynamic analysis of the observed reactions indicates that they could have occurred at relatively low temperatures (<300 °C) in the presence of aqueous solutions. Oxygen isotopic compositions of the coexisting magnetite and fayalite plot close to the terrestrial fractionation line with large Δ¹⁸O_{fayalite-magnetite} fractionation (～20%). We infer that phyllosilicates, magnetite, fayalite, Ca-Fe-rich pyroxenes and andradite formed at relatively low temperatures (<300 °C) by fluid-rock interaction in an asteroidal environment. Secondary fayalite and phyllosilicates are virtually absent in chondrules and CAIs in the CV3_oxA lithology, which is present in Allende and its dark inclusions, Axtell, ALHA81258, ALH 84028, Lewis Cliff (LEW) 86006, and parts of the Mokoia and Vigarano breccias. Instead secondary nepheline, sodalite, and fayalitic olivine are common. Fayalitic olivine in chondrules replaces low-Ca pyroxenes and rims and veins forsterite grains; it also forms coarse lath-shaped grains in matrix. Secondary Ca-Fe-rich pyroxenes are abundant. We infer that the CV3_oxA lithology experienced alteration at higher temperatures than the CV3_oxB lithology. The presence of the reduced and CV3_oxA lithologies in the Vigarano breccia and CV3_oxA and CV3_oXB lithologies in the Mokoia breccia indicates that all CV3 chondrites came from one heterogeneously altered asteroid. The metamorphosed clasts in Mokoia (Krot and Hutcheon, 1997) may be rare samples of the hotter interior of the CV asteroid. We conclude that the alteration features observed in the oxidized CV3 chondrites resulted from the fluid-rock interaction in an asteroid during progressive metamorphism of a heterogeneous mixture of ices and anhydrous materials mineralogically similar to the reduced CV3 chondrites.     

Quantification of Magmatic and Hydrothermal Processes in a Peralkaline Syenite-Alkali Granite Complex Based on Textures, Phase Equilibria, and Stable and Radiogenic Isotopes

The Puklen complex of the Mid-Proterozoic Gardar Province, SouthGreenland, consists of various silica-saturated to quartz-bearingsyenites, which are intruded by a peralkaline granite. The primarymafic minerals in the syenites are augite ± olivine +Fe–Ti oxide + amphibole. Ternary feldspar thermometryand phase equilibria among mafic silicates yield T = 950–750°C,a_SiO2 = 0·7–1 and an f_O2 of 1–3 log unitsbelow the fayalite–magnetite–quartz (FMQ) bufferat 1 kbar. In the granites, the primary mafic minerals are ilmeniteand Li-bearing arfvedsonite, which crystallized at temperaturesbelow 750°C and at f_O2 values around the FMQ buffer. Inboth rock types, a secondary post-magmatic assemblage overprintsthe primary magmatic phases. In syenites, primary Ca-bearingminerals are replaced by Na-rich minerals such as aegirine–augiteand albite, resulting in the release of Ca. Accordingly, secondaryminerals include ferro-actinolite, (calcite–siderite)_ss,titanite and andradite in equilibrium with the Na-rich minerals.Phase equilibria indicate that formation of these minerals tookplace over a long temperature interval from near-magmatic temperaturesdown to     

Development and test of an error model for categorical data

Abstract

An error model for spatial databases is defined here as a stochastic process capable of generating a population of distorted versions of the same pattern of geographical variation. The differences between members of the population represent the uncertainties present in raw or interpreted data, or introduced during processing. Defined in this way, an error model can provide estimates of the uncertainty associated with the products of processing in geographical information systems. A new error model is defined in this paper for categorical data. Its application to soil and land cover maps is discussed in two examples: the measurement of area and the measurement of overlay. Specific details of implementation and use are reviewed. The model provides a powerful basis for visualizing error in area class maps, and for measuring the effects of its propagation through processes of geographical information systems.     

Timing and pattern of the last deglaciation in the Kattegat region, southwest Scandinavia

This paper presents evidence on the timing and pattern of the Late Weichselian deglaciation in SW Scandinavia, particularly in the Öresund–Kattegat region before the Allerød interstadial. New radiocarbon ages and evaluated older dates demonstrate that active glacier ice had left eastern Denmark, southern Halland and western Skåne before 14,000 BP. The deglaciation in the Öresund region took place mainly under glacioestuarine conditions in a narrow fjord or inlet with some marine influence, as indicated by radiocarbon-dated finds of Polar Cod ( Boreogadus saida ) and the vertebra of a Ringed Seal ( Phoca hispida ). The Swedish west coast experienced glaciomarine and deltaic ice proximal conditions, where Vendsyssel was at the same time under full marine conditions with little evidence of ice rafting. A paleogeographic interpretation illustrates land, sea and ice configurations around 14,000 BP. We suggest that a subsequent lateglacial transgression reached the entire region almost simultaneously and peaked around 13,300 BP. This led to deposition of an ice-rafted diamicton ( the Öresund diamicton ) in Skåne and Sjælland, and of glaciolacustrine mud in Halland. We propose that the complex transgression and regression events recorded in the region were governed by interaction of the eustatic sea level rise, isostatic reponse to glacier unloading and possibly also by damming by an ice stream in the Skagerrak and northern Kattegat.