Numerically based proposals for the stiffness and strength of masonry infills with openings in reinforced concrete frames

Aimed at investigating the effect of openings on the in‐plane behaviour of masonry infills in reinforced concrete frames, a parametric study is presented based on model calibration via experimental tests. Two types of openings are investigated: central window openings and different combinations of door and window openings based on the typologies of southern European countries. First, a finite element model of the structure is made using the DIANA software program. Then, after calibration with experimental results, a parametric analysis is carried out to investigate the effect of the presence and location of the different types of openings on the in‐plane behaviour of the infilled frame. Finally, different equations for predicting the initial stiffness and lateral strength of infilled frames with any types of openings were obtained. An α factor related to the geometry of the piers between openings is proposed to take into account the location of the openings in the developed equations. Subsequently, the masonry infill panel is replaced by a diagonal strut. An empirical equation is also proposed for the width of an equivalent strut to replace a masonry infill panel with openings in such a way that they possess the same initial stiffness. Copyright © 2015 John Wiley & Sons, Ltd.     

The geomorphic function and characteristics of large woody debris in low gradient rivers, coastal Maine, USA

The role, function, and importance of large woody debris (LWD) in rivers depend strongly on environmental context and land use history. The coastal watersheds of central and northern Maine, northeastern U.S., are characterized by low gradients, moderate topography, and minimal influence of mass wasting processes, along with a history of intensive commercial timber harvest. In spite of the ecological importance of these rivers, which contain the last wild populations of Atlantic salmon (Salmo salar) in the U.S., we know little about LWD distribution, dynamics, and function in these systems. We conducted a cross-basin analysis in seven coastal Maine watersheds, documenting the size, frequency, volume, position, and orientation of LWD, as well as the association between LWD, pool formation, and sediment storage. In conjunction with these LWD surveys, we conducted extensive riparian vegetation surveys. We observed very low LWD frequencies and volumes across the 60 km of rivers surveyed. Frequency of LWD ≥ 20 cm diameter ranged from 15–50 pieces km^− 1 and wood volumes were commonly < 10–20 m³ km^− 1. Moreover, most of this wood was located in the immediate low-flow channel zone, was oriented parallel to flow, and failed to span the stream channel. As a result, pool formation associated with LWD is generally lacking and < 20% of the wood was associated with sediment storage. Low LWD volumes are consistent with the relatively young riparian stands we observed, with the large majority of trees < 20 cm DBH. These results strongly reflect the legacy of intensive timber harvest and land clearing and suggest that the frequency and distribution of LWD may be considerably less than presettlement and/or future desired conditions.     

Risk Assessment and Disaster Management for Natural and Anthropogenically Induced Geologic Hazards: Application to the Preolkhon Region,Western Lake Baikal,Siberia, Russia

In the Western Lake Baikal, recent Baikal Rift's tectonics control the topography, seismicity, climate, geomorphology, and economy. Scarps, facets, structural terraces, horsts and grabens, and trapezoid valleys can be clearly observed. They have been generated by the recent tectonic movements along the faults and represent a serious geologic hazard. The specific geological conditions predetermine a unique variety of landscapes. Thus, the main type of the economy is tourism. However, unorganized tourism leads to the degradation of the unique landscapes. It increases risk and requires disaster management. Three criteria has been used for risk assessment: (1) degree of geologic hazard; (2) degree of landscape degradation; and (3) degree of the economy's vitality. The high ecological significance and low stability to antropogeneous pressure are typical for landscapes of the Western Lake Baikal. Thus, some special activities of disaster management should be implemented based on our investigation.     

Organic-walled Microfossils from the Early Middle Cambrian sediments of the Holy Cross Mountains, Poland: Possible Implications for Sedimentary Environment in the SE Margin of the Baltica

An association of organic-walled microfossils consisting of filamentous cyanobacteria, algal coenobia and acanthomorphic acritarch have been documented from non-calcareous claystones and mudstones of the Pepper Mountains Shale Formation(PMSF), located in its stratotype area in the Pepper Mountains, which are part of the Holy Cross Mountains in Poland. These sediments represent the oldest strata of the ?ysogóry Unit, deposited on the edge of the East European Craton(Baltica). Non-branched, ribbon-like and thread-like cyanobacteria trichomes exhibit morphological similarities to families Nostocaceae and Oscillatoriaceae. Cells assembled in rounded to irregular clusters of monospecific agglomerations represent multicellular algal coenobia, attributed to the family Scenedesmaceae. The co-occurrence of acritarchs belonging to species as Eliasum llaniscum, Cristallinium ovillense and Estiastra minima indicates that the studied material corresponds to the lower Middle Cambrian. Deposition of the PMSF took place in shallow marine environment, influenced by periodical freshwater inputs. The varying degree of coloration of organic-walled microfossils is interpreted in this study as factor indication of possible different source of their derivation. Dark brown walls of cells assembled in algal coenobia might have sustained previous humification in humid, terrestrial environments, which preceded their river transport into the sea together with nutrients, causing occasional blooms of cyanobacteria in the coastal environment and the final deposition of both groups of organisms in marine deposits.     

Detection of regional phases of seismic body waves using an array of three-component sensors

A small-aperture seismic array consisting of seven three-component seismometers carried out continuous measurements of regional seismicity in a selected area of the Nizhni Novgorod nuclear power plant during four months of 2013. Automatic signal detection using beamforming was applied separately for each motion component. Two horizontal components were transformed into radial and transverse components for the given values of the velocity and azimuth of the plane wave front. We have investigated the dependence of the coherence of microseismic noise on frequency, azimuth, and slowness, as well as determining the level of cross-correlation between signals on separate channels in order to estimate expected improvement in the signal-to-noise ratio, which is crucial for signal detection. Most signals detected by the seismic array from regional sources are associated with quarry blasts. Using repetitive explosions at seven quarries, we have quantitatively estimated and compared the increase in detection efficiency of regional seismic phases using a three-component small aperture seismic array and a subarray of vertical sensors. Horizontal sensors showed a higher efficiency in the detection of transverse waves, while the subarray of vertical sensors missed S-waves from certain events. For one of the nearby quarries, the vertical subarray missed up to 25% of events (5 of 20). The results of the investigation point to the need for the use of three-component seismic arrays for the study of regional seismicity.     

TRANSFORMATION OF DIPOLAR,WENNER AND TWO-ELECTRODE CURVES TO SCHLUMBERGER APPARENT RESISTIVITY SOUNDING CURVES*

A simple mathematical technique based on regressional analysis allows the transformation of dipolar, Wenner and two-electrode apparent resistivity sounding curves to Schlumberger ones. The algorithm is suitable for a programmable pocket calculator and the accuracy is very high. This has been demonstrated by comparing Schlumberger master curves with transformations of master curves for the other configurations for the same model.     

Manganese ore deposits in Koira-Noamundi province of Iron Ore Group, north Orissa, India: In the light of geochemical signature

Several small Mn–Fe oxide and Mn-oxide ore bodies associated with Precambrian Iron Ore Group of rocks are located within Koira-Noamundi province of north Orissa, India. These deposits are classified into in situ (stratiform), remobilized (stratabound) and reworked categories based on their field disposition. Volcaniclastic/terrigenous shale in large geographic extension is associated with these ore bodies.The in situ ore bodies are characterised by cryptomelane-, romanechite- and hematite-dominating minerals, low Mn/Fe ratio (1.1) and relatively lower abundance of trace (1500–2500 ppm) constituents. In such type of deposits the stratigraphic conformity of oxides with the tuffaceous shale suggests precipitation of Mn and Fe at a time of decreased volcaniclastic/terrigenous contribution. The minor and trace elements were removed from solution by adsorption rather than by precipitation. Both Mn and Fe oxides when precipitated adsorb trace elements strongly but the partitioning of elements takes place during diagenesis. The inter-elemental relationship reveals that Cu, Co, Ni, Pb and Zn were adsorbed on precipitating hydrous Mn oxides and form manganates. Some of these elements probably get desorbed from Fe oxide because of their inability to substitute for Fe³⁺ in the lattice of its oxide. However, P, V, As and Mo were less partitioned and retained in Fe-oxide phase. Positive correlation between Al₂O₃ and SiO₂, MgO, Na₂O, TiO₂ and some traces like Li, Nb, Sc, Y, Zr, Th and U points to their contribution through volcaniclastic/terrigenous detritus of both mafic and acidic composition.The remobilized ore bodies are developed in a later stage through dissolution, remobilization and reprecipitation of Mn oxides in favorable structural weak planes under supergene environment. Increase in average Mn/Fe ratio (8) and trace content (5000–8500 ppm) by 5–2.5 orders of magnitude, respectively, or more above its abundance in adjoining/underlying protore is characteristic of these deposits. The newly formed Mn ores constituting lithiophorite, cryptomelane/romanechite and goethite get quantitatively enriched in traces like Cu, Co, Ni, Pb and Zn. Positive correlation between Mn, Li, Co and Zn is due to the formation of mineral of lithiophorite–chalcophanite group during redistribution and reconcentration of Mn oxide. P and V, which were present in Fe oxide, also get dissolved and reprecipitate with Fe oxyhydroxide in these ores. Some other elements like Y, Th and U show positive relation with Fe. This is probably due to leaching of these elements during chemical weathering of associated shale and getting re-adsorbed in Fe-oxyhydroxide phase.However, under oxidizing environment selective cations like Ba, K, etc. resorb from Mn-structure, resulting in the development of pyrolusite (Mn/Fe>20). In such transformation, trace metals from pyrolusitic structure expels out, resulting thereby in a considerable reduction in total trace value (<3000 ppm).The reworked ore bodies are allochthonous in nature and developed through a number of stages during terrain evolution and lateritisation. Secondary processes such as reworking of pre-existing crust; solution and remobilization; precipitation and cementation and transport, etc. are responsible for their development. Such deposits are usually very low in Mn/Fe ratio (3) and trace content (<2000 ppm).     

Exhumation history of the Peake and Denison Inliers: insights from low-temperature thermochronology

Multi-method thermochronology applied to the Peake and Denison Inliers (northern South Australia) reveals multiple low-temperature thermal events. Apatite fission track (AFT) data suggest two main time periods of basement cooling and/or reheating into AFT closure temperatures (～60–120°C); at ca 470–440 Ma and ca 340–300 Ma. We interpret the Ordovician pulse of rapid basement cooling as a result of post-orogenic cooling after the Delamerian Orogeny, followed by deformation related to the start of the Alice Springs Orogeny and orocline formation relating to the Benambran Orogeny. This is supported by a titanite U/Pb age of 479 ± 7 Ma. Our thermal history models indicate that subsequent denudation and sedimentary burial during the Devonian brought the basement rocks back to zircon U–Th–Sm/He (ZHe) closure temperatures (～200–150°C). This period was followed by a renewal of rapid cooling during the Carboniferous, likely as the result of the final pulses of the Alice Springs Orogeny, which exhumed the inlier to ambient surface temperatures. This thermal event is supported by the presence of the Mount Margaret erosion surface, which indicates that the inlier was exposed at the surface during the early Permian. During the Late Triassic–Early Jurassic, the inlier was subjected to minor reheating to AFT closure temperatures; however, the exact timing cannot be deduced from our dataset. Cretaceous apatite U–Th–Sm/He (AHe) ages coupled with the presence of contemporaneous coarse-grained terrigenous rocks suggest a temporally thermal perturbation related with shallow burial during this time, before late Cretaceous exhumation cooled the inliers back to ambient surface temperatures.     

Application of stress mapping in cross‐section to understanding ore geometry,predicting ore zones and development of drilling strategies

Stress mapping is a numerical modelling technique used to determine the distribution and relative magnitude of stress during deformation in a mineralised terrane. It is based on the general principle that fluid flow in the Earth's crust is primarily related to pressure gradients. It is best applied to epigenetic hydrothermal mineral deposits, where fluid flow and fluid flux are enhanced in dilational sections of structures and in sites of enhanced rock permeability due to high fracture density. These are defined by sites of low minimum principal stress (σ₃). Most stress mapping is carried out in two dimensions in plan view using geological maps. This is suitable for terranes with steeply dipping lithostratigraphy and structures in which the distribution of mineral deposits is largely controlled by fault structures portrayed on the maps. However, for terranes with gently dipping sequences and structures, and for situations where deposits are sited in and near the hinges of complex fold structures, stress mapping in cross‐section is preferable. The effectiveness of stress mapping is maximised if mineralisation was late in the evolutionary history of the host terrane, and hence the structural geometry of the terrane and contained deposits were essentially that expressed today. The orientation of syn‐mineralisation far‐field stresses must also be inferred. Two examples of orogenic gold deposits, which meet the above criteria, are used to illustrate the potential of stress mapping in cross‐section. Sunrise Dam, located in the Archaean Yilgarn Craton, is a lode‐gold deposit sited in a thrust‐fold belt. Stress mapping illustrates the heterogeneity of stress distribution in the complex structural geometry of the deposit, and predicts the preferential siting of ore zones around the intersections of more steeply dipping, linking thrusts and banded iron‐formation units, and below the controlling more gently dipping basal thrust, the Sunrise Shear. The Howley Anticline in the Pine Creek block hosts several Palaeoproterozoic gold deposits, sited in complex anticlinal structures in greywacke sequences. Stress mapping indicates that gold ores should develop in the hinge zones of symmetrical anticlines, in the hinge zones and more steeply dipping to overturned limbs of asymmetric anticlines, and in and around thrusts in both anticlines and parasitic synclines. The strong correlation between the predictions of the stress mapping, based on the distribution of low σ₃, and the location of gold ores emphasises the potential of stress mapping in cross‐section, not only as an exploration tool for the discovery of additional resources or deposits, but also as a test of geological models. Knowledge of the potential siting of gold ores and their probable orientations also provides a guide to drilling strategies in both mine‐ and regional‐scale exploration.