Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.     

南海东北部表层沉积中生源和矿物碎屑组分分析及其古环境意义

通过对南海东北部128个表层沉积样品的定量研究，揭示隆源和矿物碎屑各组分的分布，也显示了组分分析作为一种简单、快速的研究方法在海洋古环境研究中的潜力，研究区生源碎屑的分布明显受与水深相关的深海溶解作用所控制，水深3500-4000m的现代南海CCD以下，钙质生物的含量急剧减少，而硅质生物的含量急剧增加，研究区表层沉积中的碎屑矿物主要来源于亚洲大陆，吕宋镐的风化产物只起次要作用，且其分布主要受与离岸距离远近和海流相关的搬运作用所控制。     

A Preliminary Study of Quantitative Distribution of Benthic Animals in the East China Sea Continental Shelf and Its Adiacent Waters

In October and November of 1977 and September and October of 1978,a quantitative survey of benthic animals was conducted in the East China Sea Continental Shelf and its adjacent waters(26°00'-34°00'N,124°00'-129°00'E,water depth 39-1550m),where 307 stations were dredged and 1200 samples collected.     

辽东湾S2冰侧限剪切强度的试验研究

利用试验方法系统地研究了辽东湾S2型海冰侧限剪切强度随剪切应变速率、加载方向、法向应力、温度和冰内孔隙率的变化规律。介绍了S2型海冰各向异性特点及剪切应变速率对剪切破坏方式的效应和韧脆破坏转变的条件。分析了不同加载方向海冰峰值剪切强度的差异 ,获得 - 6 2℃温度下S2冰内摩擦角和内聚力分别为 42°和 70 0kPa。利用统计分析给出峰值剪切强度与冰温和孔隙率的试验关系     

东海北部黑潮区浮游动物的多样性研究

由于浮游动物在海洋生态系统中处于主导地位及其对生物地球化学循环和全球变化的重要影响,浮游动物与环境间相互作用的研究已成为现代海洋生态学研究的一个核心问题[1].     

小球藻紫外线诱变及高产藻株筛选

利用单细胞分离技术和紫外诱变育种技术,筛选高产小球藻株。通过单细胞分离技术获得的藻株Chlorella vul-garisQ7,生长速度和蛋白含量均优于其它藻株。以C.vulgarisQ7为出发株,进行紫外诱变,从120株诱变单克隆中筛选出3个株系:M51,M59,M73。与出发株相比,突变株M51,M59,M73的生长速率分别提高了6.23%,3.8%,5.92%。蛋白含量分别提高了2.5%,3.1%,1.9%。研究了诱变株的最适生长条件,结果表明在140μmol.m-2.s-1,25℃时,诱变株具有最大的生长速率和生物量。探讨了诱变株的遗传稳定性,结果表明诱变株可稳定遗传。     

使用GAMIT进行高精度基线向量解算的方法与实践

GAM IT是国际上常用的GPS定位定轨软件,但由于其安装的平台(UN IX/LINUX)与我们通用的W indow s平台有所差异,使得GAM IT的入门较难。因此本文结合具体实例,介绍GAM IT的安装、基本操作以及应用GAM IT进行高精度基线向量解算,供初学者参考。     

TOPCON GTS901A机载程序设计

介绍了基于Windows CE嵌入式操作系统,开发了TOPCON智能型全站仪GTS901A机载程序的方法,实现了学习测量、自动测量、数据存储及处理等功能。     

一个新的沉积变质型钛矿床的成矿模式及找矿方法

内蒙古羊蹄子山沉积变质型钛矿床是一个新的钛矿床类型。通过对地质、地球物理前提条件的研究和找矿方法试验,认为高精度磁法是找沉积变质型钛矿床的基本方法,重力为有效的找矿方法。在矿区北带磨石山以金红石为主的富钛矿体上有600 μGal的重力异常,无磁异常;南带的羊蹄子山钛铁矿体上重力异常为500 μGal,有60 nT的弱磁异常。     

Simulation experiment on hydrocarbon generating potential of various source rocks on the northern margin of the Qaidam Basin,Qinghai, China

The northern margin of the Qaidam Basin is one of the main oil-gas exploration areas in western China, where source rocks are composed mostly of Middle and Lower Jurassic dark mud shale, carbargillite and coal. A large number of subsurface and outcrop samples differing in lithology with different types of organic matter were selected for resource evaluation, research and calculation. And among them, 13 samples were used for simulation experiment on hydrocarbon generating potential of various source rocks. At first, two kinds of heating modes were compared through simulation experiment, including single temperature-step heating and continual heating. Perhaps, the process of hydrocarbon generation and expulsion occurred naturally between a close system and an open system. In addition, the first heating mode was convenient, and all its reaction products were involved in the whole thermal evolution, and the final simulation experimental results were basically in consistency with the natural evolution trend Therefore, the first heating mode was adopted and the hydrocarbon yield of every sample was worked out. According to the type and lithology of organic matter and the hydrocarbon yield of samples for simulation experiment, hydrocarbon generation and expulsion mode with three kinds of lithology and five types of source rock has been established to provide the basis for hydrocarbon generation evaluation, research and resource calculation.