Effects of vegetation restoration on soil physical properties of abandoned farmland on the Loess Plateau,China

To improve the ecological environment in China, the Chinese government implemented a country-wide ecological protection and reforestation project (namely the “Grain for Green Project”) in 1999 to return cultivated land with slopes of 25° or more to perennial vegetation. Vegetation restoration reduces soil erosion mainly by changing the soil physical properties. Different vegetation restoration methods might produce different impacts on soil physical properties. In this study, two vegetation restoration methods (i.e., natural restoration and artificial restoration) were compared on abandoned farmland in the typically hilly and gullied areas of the Loess Plateau of Northwest China. In the natural restoration method, the farmland was abandoned to natural vegetation succession without irrigation, fertilization or other artificial disturbances. In the artificial restoration method, the farmland was planted with black locust (Robinia pseudoacacia L.) and watered and cultivated for the first two years. Three soil physical properties (i.e., soil moisture, bulk density and aggregation) were investigated under the two vegetation restoration methods. The results showed that the soil moisture and soil bulk density were higher under artificial restoration than under natural restoration within the first three years of vegetation restoration. By the fourth year, the soil moisture and soil bulk density were higher under natural restoration than under artificial restoration. For the stability of soil aggregates?>?0.25 mm, the soil aggregates in the 0-20 cm soil layer were more stable under artificial restoration than under natural restoration, while the results were the opposite for the 40-60 cm soil layer. Overall, the soil physical properties were continuously improved during the restoration of vegetation on abandoned farmland. In choosing between vegetation restoration methods, natural restoration is preferable to artificial restoration, but artificial intervention is needed during the first three years.     

Heavy metals status,transport mechanisms,sources, and factors affecting their mobility in Chinese agricultural soils

Heavy metals are the focus of much interest because of their environmental persistence, toxicity, and mobility in soils. Some of the Chinese soils have been contaminated with heavy metals due to expansion of mining industries, pesticides usage, and other anthropological activities, which made the agro-ecosystem to become contaminated. The objective of this review is to illuminate the current pollution status, sources of heavy metals, transport mechanisms, and the factors affecting their mobility in Chinese soils. The additional studies in the future will present on source identification and the heavy metal transport characteristics in soil.     

Effect of climate change on water resources in the Yuanshui River Basin: a SWAT model assessment

The Yuanshui River Basin is one of the most important river basins ensuring food production and livelihoods in the Hunan and Guizhou Provinces of China. Based on digital elevation model, land use, soil, and meteorological data, the soil and water assessment tool was used to analyze the response of water resources in the basin to climate change. Specifically, the monthly runoff from the Yuanshui River Basin was simulated. Runoff measurements from the 1961–1990 series were used to calibrate model parameters, and measurements from the 1991–2010 series were used for model validation. The Nash–Sutcliffe efficiency coefficient, correlation coefficient, and water balance error were used to evaluate the simulation results; the values obtained for these parameters were 0.925, 0.929, and 2.0%, respectively, indicating that the established model can be applied successfully to runoff simulations. To evaluate the effects of climate change and human activities on runoff, 24 different climate scenarios were modeled. By comparing the model simulation results with the baseline scenario, the effects of climate change were analyzed by year, during the dry season, and during extremely dry conditions. The results showed that runoff decreased with increasing air temperature and decreasing precipitation, and that the effects of rainfall on runoff were greater than those of air temperature. Under the same baseline conditions, the effects of climate change on runoff were most pronounced during extremely dry months.     

中国—吉尔吉斯斯坦天山构造格架与演化

中国—吉尔吉斯斯坦天山地处中亚天山造山带中段,地质构造复杂,矿产资源丰富。在前人资料基础上,基于区域构造-岩石组合的分布发育及时空属性特征,统一将研究区划分为哈萨克斯坦和塔里木两大板块,二者由南天山晚古生代缝合带所焊接。其中,进一步划分为5个二级单元,18个三级单元。研究认为,研究区内北、中、南天山构造格架连续,在800 Ma(相当于南华纪下限)前后都完成了大陆块体的拼合,成为全球新元古代罗迪尼亚超大陆的组成部分。此后经历了大致相同的构造演化史,从中二叠世开始全区转化成陆内盆山构造格局,新生代印度大陆同欧亚大陆碰撞使这一陆内盆山构造格局不断臻于完善。     

安徽茶亭铜金矿床赋矿石英闪长玢岩黑云母成分特征及成岩成矿指示意义

安徽宣城茶亭矿床位于长江中下游成矿带东南缘的南陵-宣城盆地内,是近年来该盆地内新发现的大型斑岩型Cu-Au矿床。石英闪长玢岩是茶亭矿床主要的赋矿岩石,文章从石英闪长玢岩的造岩矿物黑云母入手,利用EMPA及LA-ICP-MS等原位微区分析方法,对黑云母进行了详细的矿物化学分析,旨在查明赋矿石英闪长玢岩形成的物理化学条件,并探讨其成岩成矿意义。分析结果表明:茶亭赋矿石英闪长玢岩中黑云母具有高w(TiO_2)、低w(Al_2O_3)的特征,整体富Mg、贫Fe。黑云母温压计算结果表明,在不同深度上,石英闪长玢岩具有相似的结晶温度及压力,其结晶温度为746～773℃,压力为44～85 MPa,对应深度为1.7～3.3 km,平均为2.47 km,显示石英闪长玢岩侵位深度相对较浅。黑云母中高的氧化系数(0.613～0.864)、高Mg#(0.557～0.864),以及w(MgO)介于14.73%～15.86%,均显示石英闪长玢岩为壳幔混源,并且以幔源为主。黑云母成分显示石英闪长玢岩形成于较高氧逸度条件下。浅部岩体具有较高的X_(Mg)值,表明浅部岩体氧逸度较高,可能指示随着岩浆的不断演化,残余岩浆的氧逸度不断降低。同时,石英闪长玢岩黑云母相对一般斑岩型铜矿具有较高的w(Cu),并且高Cl、低F。这些特征均有利于茶亭Cu-Au矿床的形成。     

豫西崤山东部中河岩体锆石U-Pb年龄、地球化学和Lu-Hf同位素特征

中河花岗斑岩体位于河南省崤山东部,该岩体是最近发现的中河大型银铅锌矿床的成矿母岩。选取2件花岗斑岩样品进行LA-ICP-MS锆石U-Pb定年,获得2件样品的~(206)Pb/~(238)U年龄加权平均值分别为(129±0.7)Ma(MSWD=0.78)和(131±1.5)Ma(MSWD=1.70),表明中河岩体形成于早白垩世。岩石地球化学特征显示,中河岩体具有高的w(SiO_2)和w(K_2O)、低的w(Na_2O),其A/CNK比值为1.03~1.63,Mg#值介于25~50,总体上属于过铝质-强过铝质的高钾钙碱性系列。岩石具有低的w(Yb),中等-弱的铕负异常,稀土元素配分曲线为轻稀土元素富集型,轻稀土元素分馏相对强烈,但重稀土元素分馏不明显。中河岩体有相对低的w(Sr)和w(Y),且富集大离子亲石元素Rb、Ba、U、K和轻稀土元素,亏损高场强元素Nb、Ta、P、Zr、Hf、Ti和重稀土元素。中河岩体锆石εHf(t)值为-34.4~-23.2,平均为-26.9,Hf同位素二阶段模式年龄介于2485~3182 Ma,平均为2714 Ma。岩石地球化学特征及Hf同位素组成表明中河岩体的岩浆源区主要为新太古代地壳物质,并有少量的中太古代地壳物质,中-新太古代增生的具有弧岩浆特征的地壳物质部分熔融形成了早白垩世的中河岩体。     

河南崤山金矿床流体包裹体及同位素特征

崤山金矿床位于华北克拉通南缘的豫西地区,矿体大多呈脉状产于断裂带内。成矿期可以划分为3个阶段:(1)石英-黄铁矿阶段;(2)石英-多金属硫化物阶段;(3)石英-碳酸盐阶段。成矿期石英中发育气液两相水溶液包裹体(WL型)和H_2O-CO_2包裹体(C型)。石英-黄铁矿阶段发育WL型和C型包裹体,它们的均一温度为300~393℃,盐度w(NaCl_(eq))为1.6%~11.0%,密度介于0.57~0.82 g/cm~3;石英-多金属硫化物阶段亦发育WL型和C型包裹体,它们的均一温度为261~298℃,盐度w(NaCl_(eq))为1.1%~11.8%,密度介于0.74~0.89 g/cm~3;石英-碳酸盐阶段仅见WL型包裹体,其均一温度为193~258℃,盐度w(NaCl_(eq))介于2.2%~12.7%,密度为0.87~0.97g/cm~3。成矿流体具有中高温、中低盐度、低密度等特征,属于H_2O-NaCl±CO_2体系。崤山金矿石英的δ~(18)OH_2O值介于0.7‰~4.5‰之间,δDV-SMOW值介于-47.8‰~-69.5‰之间。H-O同位素结果表明成矿流体主要来源于岩浆水。矿石硫化物的δ_(34)SV-CDT值为0.7‰~3.9‰,206Pb/204Pb值为17.391~17.728,~(207)Pb/~(204)Pb值为15.420~15.577,~(207)Pb/~(204)Pb值为37.420~37.923。S-Pb同位素结果表明成矿物质主要来源于花岗质岩浆。崤山金矿为中温热液脉型金矿,流体相分离和温度的降低是导致矿质沉淀的主要机制。     

蒙脱石伊利石化的水热实验模拟

以蒙脱石为初始材料,通过水热实验模拟在不同温度压力条件下蒙脱石的伊利石化过程。利用X射线粉末衍射及X射线荧光光谱、红外光谱和扫描电镜等方法对样品的矿物物相、化学成分、晶体结构与微观形貌等进行分析,其结果表明:(1)蒙脱石至伊利石的转化受温度和压力条件的控制;(2)随着温度和压力的增高,蒙脱石伊利石化沿着蒙脱石-无序伊蒙混层-有序伊蒙混层-伊利石的转化序列进行转化;(3)水热实验模拟表明蒙脱石至伊利石的转化以溶解重结晶机制为主。实验结果不仅有助于了解埋藏与低级变质作用中的蒙脱石伊利石化过程,同时为研究断层活动所致断层泥中黏土矿物的转化及反演断层形成时温度压力条件提供基本参数。     

张广才岭南段两个侏罗纪花岗岩体的地球化学特征及其地质意义

通过LA-ICP-MS锆石U-Pb定年和岩石化学分析,研究了张广才岭南段上营北岩体和帽儿山岩体的形成年代,地球化学特征和形成环境。上营北岩体为中粗粒钾长花岗岩,帽儿山岩体为中细粒黑云母钾长花岗岩。上营北岩体的加权平均年龄为178.9±2.7 Ma,帽儿山岩体为183.7±2.4 Ma,均为早侏罗世侵入岩。上营北岩体和帽儿山岩体主量元素都具有Si O_2和K_2O含量较高,Ti O_2、Mg O、Ca O含量较低,TFe O/Mg O值较高的特点;上营北岩体A/CNK=0.98~1.08,里特曼指数σ=1.51~2.66;帽儿山岩体含铝指数A/CNK=1.00~1.01,里特曼指数σ=2.12~2.36。上营北岩体稀土元素配分模式为海鸥型,轻重稀土分馏不明显;帽儿山岩体稀土元素配分模式为右倾型,轻稀土较重稀土富集;两个岩体均富集Rb、K,Ba、Nb、Ta、Sr、Ti、P、Ho、Er、U、Eu等元素出现不同程度的亏损。地球化学特征分析显示上营北岩体和帽儿山岩体均为A_2型花岗岩,为后造山型花岗岩,形成于兴蒙造山带后造山的伸展环境。     

序贯高斯模拟在矿石品位估计中的应用研究

随机模拟是地质统计方法的重要内容。在矿石品位估计方法中克里格方法作为一种无偏估计方法,常被用于矿石品位的估计。但克里格法估值存在平滑效应。作者在分析序贯高斯模拟和普通克里格法基本原理的基础上,运用序贯高斯模拟方法和普通克里格方法对某铁矿体内全铁(TFe)品位进行估计,给出了品位估计结果模型。研究从勘探线方向、垂直勘探线方向和竖直方向分别计算变差函数,对球状模型、指数模型、高斯模型的变差函数拟合效果进行了优选,结果表明球型模型拟合效果最好。针对序贯模拟和克里格品位估值效果进行了分析,结果显示:序贯高斯模拟结果在品位分布形态上更接近样品品位分布形态,其平滑效应更小;克里格方法估计与序贯高斯模拟方法相比仅在品位均值方面更接近样本品位均值。因此,认为序贯高斯模拟方法可以更好地刻画矿体内品位分布状态。