New method of quantitatively describing drainage areas

The aim was to introduce a new method, the DAZ method (drainage area zonation), to quantify environmental parameters, such as bedrocks, soil type, and land use in drainage areas. The work was carried out within the framework of the Swedish project Liming—mercury. Two important points in the project are that there are quantifiable relationships between the character of the drainage area and the lake and that several limnological and morphometric parameters may have an impact on the Hg content in fish. The DAZ method accounts for the fact that, for example, a certain soil type does not have an even distribution in the whole drainage area. To get a simple yet relevant measure of the influence of, for example, soil type on the lake character, the drainage areas were divided into zones using a special transparent paper placed on the map. The method gives normalized values depending on: (1) distance between the object and the given lake, (2) the main direction of water flow in the drainage area, and (3) the area of the environmental parameter (for example, area of bedrock). In the DAZ method, dot counting is used for determination of area. The dot-counting method has been compared with other methods for area determination (planimeter and square counting). Dot counting is the fastest and the counting of squares the most time consuming. The statistical reliabilities of the dot method and the planimeter method were compared. The planimeter is best for large homogeneous objects. Dot counting, on the other hand, is very well suited for heterogeneous objects. The statistical certainty of area determination depends on size, heterogeneity, and form of the objects, as well as the time dedicated to the determination. A nomogram is also given, which illustrates the relationship between the number of counts, that is, the number of times the transparent dotted paper is put on the map and the dots counted, the error in the area determination, and the statistical reliability.     

A fluid inclusion and light element stable isotope study of the gold-bearing quartz vein system,Falun, Sweden

The Falun gold quartz vein mineralization is located ca 230 km NW of Stockholm, Sweden, within the Early Proterozoic volcano-sedimentary sequence of Bergslagen. The mineralization consists of a system with subparallel quartz veins that crosscut the alteration zone to the Falun massive sulphide deposit. Early barren and late gold-bearing quartz veins follow tectonic structures postdating the formation of the massive sulphide ore. Both generations of veins are epigenetic to the massive sulphide ore and were formed by hydrothermal processes. Fluid inclusion study of the gold-bearing quartz veins indicates a low-moderately saline fluid (0.3 to 17.4 equiv wt% NaCl). Heterogeneous trapping is indicated by coexisting inclusions showing a variable CO₂ content from 100% CO₂ ± CH₄ to 100% aqueous fluid. Temperatures of total homogenization also show a wide spread from 116–350°C with a slightly bimodal distribution with peaks at ca 180°C and 280°C. MeasuredδD values — 69 to — 63%0 (SMOW), of inclusion fluid and calculatedδ ¹⁸O values of hydrothermal fluids — 7.5 to — 1.4%0 (SMOW), strongly suggest a meteoric origin for the fluids. The quite consistentδD values and the range inδ ¹⁸O values indicate that major water-rock interaction led to the evolution inδ18O of the hydrothermal fluids.     

Specifying the transformations within and between geographic data models

Geographic information is acquired according to several different underlying models of geographic space. Any meaning inherent within a dataset is intrinsically connected to the model by which it was captured. A design is presented for an integrated geographic information system offering a number of distinct views onto geographic space, of varying degrees of abstraction, to support the needs of an expanded user base. An architecture for such a system is developed by an extension of the traditional three layer architecture used in database design. The movement of data from one level of abstraction to another is formalized by a series of dataset and model transformations operating between four different geographic data models. From this formalism, a functional taxonomy of GIS operations is developed.     

Host rock dolomitization and secondary porosity development in the Upper Devonian Cairn Formation of the Fairholme carbonate complex (South‐west Alberta,Canadian Rockies): diagenesis and geochemical modelling

The Upper Devonian carbonate reefs in West‐central Alberta are important petroleum reservoirs that are well‐known for their extensive secondary porosity. An outcrop analogue study indicates that an early matrix‐selective dolomitization event occurred which is characterized by a major Late Devonian sea water component with increased salinity because of evaporation. It is interpreted that the matrix (replacive) dolomite formed during the Famennian as the result of a combination of both seepage and latent reflux dolomitization, although an additional type or overprinting of later intermediate burial dolomitization cannot be excluded. Formation of the moulds is attributed mainly to the dissolution of undolomitized fossil cores, most typically stromatoporoids. Geochemical modelling indicates that carboxylic acid fluids have the highest potential for dissolving residual calcite in this case. Geochemical models consistent with this analysis and interpretations can reproduce the secondary porosity and suggest a viable dolomitization process for the localities studied.     

Solar convection

The hydrodynamics of solar convection is reviewed. In particular, a discussion is given of convection on the scale of granulation; i.e., the energy carrying convection patterns in the solar surface layers, and its penetration into the stable layers of the solar photosphere. Convection on global and intermediate scales, and interaction with rotation and magnetic fields is discussed briefly.     

Rheological Properties of Partially Molten Lherzolite

Lherzolite samples synthesized from fine-grained powders preparedfrom a natural xenolith were deformed at P = 300 MPa and 1373     

Air-clad fibres for astronomical instrumentation: focal-ratio degradation

Focal-ratio degradation (FRD) of light launched into high-numerical aperture (NA) single-annulus all-silica undoped air-clad fibres at an NA of 0.54 is reported. The measured annular light distribution remained Gaussian after 30 m of propagation, but the angular FWHM of the output annulus doubled from 4° after 1 m propagation to 8.5° after 30 m, which is significantly larger than that reported of standard doped-silica fibres (NA < 0.22). No significant diffractive effects were observed. The design of air-clad fibres for broad-band, high-NA astrophotonics applications is discussed.     

Long-Term Evolution of Fluid-Rock Interactions in Magmatic Arcs: Evidence from the Ritter Range Pendant, Sierra Nevada, California, and Numerical Modeling

A record of > 100 million years of fluid flow, alteration,and metamorphism in the evolving Sierra Nevada magmatic areis preserved in metavolcanic rocks of the Ritter Range pendantand surrounding granitoids. The metavolcanic rocks consist of:(1) a lower section of mostly marine volcaniclastic rocks, lavas,and intercalated carbonate rocks that is Triassic to Jurassicin age, and (2) an upper section comprising a subaerial caldera-fillcomplex of mid-Cretaceous age. Late Cretaceous high-temperaturecontact metamorphism (2 kbar, >450–500C) occurredafter renewed normal faulting along the caldera-bounding faultsystem juxtaposed the two sections. The style and degree of alteration and ¹⁸O values differ amongthe rocks of the upper and lower sections and the granitoids.Rocks of the lower section show pervasive lithologically controlledalkali alteration, local Mn and Mg enrichment, and oxidation.Some ash flow tuffs now contain up to 10% K²O by weight. Therocks of the upper section show lesser extents of alkali alteration.Granitoids that cut both sections are generally unaltered. Mostmetavolcanic rocks of the lower section have high ¹⁸O values(+ 11 to + 16%; whole rock and quartz phenocrysts); however,lower-section rocks within the caldera-bounding fault systemhave low ¹⁸O values of + 4 to +7. The metavolcanic rocks ofthe upper section also have low ¹⁸O values of + 2 to + 7. Granitoidshave ¹⁸O values of + 7 to + 10, typical of unaltered Sierrangranitoids. The lower section contains discontinuous veins ofhigh-temperature (450–500C) calc-silicate minerals. Theseveins are typically <5 m long, do not cross intrusive contacts,and postdate the pervasive alkali alteration. Late veins aretypically > 10 m long, formed at temperatures of less than450–500C, and cross intrusive contacts. Veins have similar¹⁸O values to those of the local host rocks. The nature of the alteration and the high oxygen isotopic valuesof the rocks of the lower section indicate that these rocksinteracted extensively with seawater at temperatures <300C,probably in superposed marine hydrothermal systems associatedwith coeval volcanic centers. Metavolcanic rocks of the uppersection evidently interacted with meteorie waters, probablyin a hydrothermal system associated with the Cretaceous caldera;rocks of the lower section that were adjacent to the calderawere also affected by this alteration. The preservation of thesignatures of these earlier events, the nature of the earlyveins, and results from numerical models of hydrothermal flowthat include fluid production indicate that during progradecontact metamorphism, the rocks of the pendant primarily interactedwith locally derived fluids. Fluid flow was predominantly upwardand away from intrusive contacts and down-temperature. Permeabilitiesare estimated to have been between 0•1 and 1µD, whichis that necessary for maintenance of lithostatic fluid pressures.In hydrothermal models with such permeabilities, large-scalecirculation of meteoric fluids develops after prograde metamorphismceases. The nature of the late veins in the Ritter Range pendantsuggests that such a flow pattern evolved only after the pendantand granitoids had cooled below 450–500C. The long-termhistory of alteration documented in the Ritter Range pendantis probably typical of wall rocks in most batholiths *Present address: Department of Geosciences, University of Arizona, Tucson, Arizona 85721