岩浆型Cu-Ni-PGE硫化物矿床研究的几个问题探讨

文章简述了岩浆型Cu—Ni—PGE硫化物矿床的主要特点和研究现状,探讨了矿床的成矿机制,认为其成矿的首要条件是岩浆中硫达到饱和而使硅酸盐岩浆与硫化物熔体发生熔离。综述了如何利用同位素方法确定其成矿物质来源,介绍了如何判别硫饱和度的方法。     

滇黔交界地区峨眉山玄武岩铜矿的PGE及微量元素特征

为了进一步探讨玄武岩铜矿的成因,文章对滇黔交界地区玄武岩铜矿石的铜、铂族元素及其他微量元素的地球化学特征进行了研究。结果表明：与铜矿化关系密切的有机质对铜的初始富集作用不明显,铜矿化是后生热液成因的,进一步支持了玄武岩为铜矿化的矿源岩、沥青及碳质等有机质的存在只是为自然铜沉淀提供了条件的认识。而且,铜矿石的低U、Th含量为该类铜矿石的铅是正常铅提供了合理的解释。     

低效用海评价指标体系构建研究——以浙江省普陀区填海用海为例

本文旨在针对当前海域节约集约利用的要求下,缺乏低效用海客观评价体系的现状。采用层次分析法和德尔菲专家打分法等技术,在DPSIR框架下,从指标选取、权重设立以及综合评价等方面构建低效用海评价指标体系,并在浙江省普陀区进行应用示范。结果显示,普陀区41个填海项目中,有17个项目评价等级为优,有4个评价等级为良好。等级为一般和较差的项目各10个,占评价项目48.7%。这表明普陀区填海项目中批而未填、填而未建或闲置用海情况较为明显。本研究在指标体系构建和实际应用方面具有创新性和先进性,对于低效用海的节约集约利用具有一定的实际意义和应用价值。     

基于FFT-MA的随机介质建模方法

随机介质是描述地球介质小尺度非均匀性的有效模型,在地震散射波场分析、储层描述等领域具有广泛应用,快速准确的随机介质建模方法是开展相关研究的基础与前提.本文首次将FFT-MA（Fast Fourier Transform Moving Average）算法引入到随机介质建模研究中,分析了该方法与传统随机介质建模方法相比具有的优势,并提出了基于FFT-MA的非平稳随机介质建模方法.建模实验表明,与传统的基于谱分解定理的随机介质建模方法相比,基于FFT-MA的方法在空间域产生随机数序列,使随机数序列与结构参数分离,因此,随机数序列与所建模型存在空间上的对应关系,可以分区域建模和局部修改模型.在非平稳随机介质模型建模时,滑动窗口的大小可以根据自相关长度变化而变化,避免了每个采样点都建立一次完整大小的模型,提高了建模效率.因此,FFT-MA随机介质建模方法能准确构建满足自相关函数要求的平稳及非平稳随机介质模型,具有建模效率高、灵活、实用的优点.     

COMPREHENSIVE ANALYSIS OF THE MACRO- AND MICRO-PHYSICAL CHARACTERISTICS OF DENSE FOG IN THE AREA SOUTH OF THE NANLING MOUNTAINS

Using the composite field observational data collected in the area south of the Nanling Mts. and numerical modeling, the seasonal features of dense fog and visibility, fog drop spectrum and physical concept of fog forming have been analyzed. The occurring frequency of low visibility（≤200 m） is very high with a mean of 24.7%, a maximum of 41.8% from the end of autumn to winter and next spring. The fog processes that occur in the area south of the Nanling Mts. in spring and winter result from the interactions of complicated micro-physical processes, the local terrain, water vapor transportation and the influencing weather system. The fog processes are arisen from advection or windward slope, which is much different from the radiation fog. Cooling condensation due to the air lifted by the local mountain plays an important role in fog formation. Windward slope of the mountain is favorable to the fog formation. Dense fog can occur at lower altitudes in the windward slope of mountain, resulting in the lower visibility. The fog is mainly of small-drop spectrum with smaller number-density than that of urban fog, and its drop spectrum has descending trend in the section of smaller diameter. The inverse relationship between fog water content and visibility is the best among several relationships of micro-variables. In addition to micro-physical processes of fog body itself, the motion of irregular climbing and crossing over hillside while the fog body is being transported by the wind are also important reasons for the fluctuation of micro-physical parameters such as fog water content.     

GEOMORPHOLOGY OF THE GYARING CO FAULT ZONAL DRAINAGE SYSTEM AND ITS STRUCTURAL IMPLICATIONS

Strike-slip faults and normal faults are dominant active tectonics in the interior of Tibetan plateau and control a series of basins and lakes showing extension since the Late Cenozoic, by contrast with the thrust faulting along the orogenic belts bordering the plateau. The late Neotectonic movement of those faults is key information to understand the deformation mechanism for Tibetan plateau. The Gyaring Co Fault is a major active right-lateral strike-slip fault striking~300° for a distance of~240km in central Tibet, in south of Bangong-Nujiang suture zone. The Gyaring Co Fault merges with the north-trending Xainza-Dinggye rift near the southern shore of Gyaring Co. From NW to SE, Dongguo Co, Gemang Co-Zhangnai Co, Zigui Co-Gyaring Co form the Gyaring Co fault zonal drainage basin. Some scholars have noticed that the formation of lakes and basins may be related to strike-slip faults and rift, but there is no analysis on the Gyaring Co fault zonal drainage basin and its response to regional tectonics. In recent years, a variety of quantitative geomorphic parameters have been widely used in the neotectonic systems to analyze the characteristics of the basin and its response mechanism to the tectonic movement. In this paper, we applied ASTER GDEM data on the ArcGIS platform, extracted the Gyaring Co fault zonal drainage basin based on Google Earth images (Landsat and GeoEye) and field work. We acquired basic geomorphic parameters of 153 sub-basin (such as grade, relief, average slope, area) and Hypsometric Index (HI) value and curve. Statistical results have indicated significant differences in scale(area and river network grade)in north and south sides of the fault. Southern drainage basins' relief, slope, HI value are higher than the northern basins, and the overall shape of hypsometric curve of northern basins are convex compared with southern concavity. Along the strike of the Gyaring Co Fault, average slope, and HI value are showing generally increasing trending and hypsometric curve become convex from west to east. By comparing and analyzing the lithology and rainfall conditions, we found that they have little influence on the basic parameters and HI value of drainage basins. Therefore, the changes of basin topographic differences between northern and southern side of fault and profile reveal the Gyaring Co Fault has experienced differential uplift since the late Cenozoic, southern side has greater uplift compared to the north side, and the uplift increased from NW to SE, thus indicate that normal faulting of the Gyaring Co Fault may enhanced by the Xainza-Dinggye rift. The early uplift of the Gangdise-Nyainqentanglha Mountain in late Cenozoic might provide northward inclined pre-existing geomorphic surfaces and the later further rapid uplift on the Gangdise-Nyaingentanglha Mountain and Xainza-Dinggye rift might contribute to the asymmetrical development of the Gyaring Co fault zonal drainage basin.     

软悬挂状态下隔水管动力特性分析

建立了软悬挂状态下隔水管动力分析模型,采用有限单元法对模型进行离散,结合Newmark-β法对动态方程求解,并对模型进行验证,最后选取南海某口深水井实际参数,对软悬挂状态下隔水管动力特性进行分析。研究结果表明:软悬挂状态下隔水管底端横向位移最大,顶部铰接处弯矩最大。软悬挂状态下,隔水管横向位移与弯矩随着海底隔水管总成(LMRP)重量增加而减小,随着平台运动速度、平台航向与海流方向夹角增大而增大;回收隔水管减小悬挂长度有利于减小最大横向位移,但会造成弯矩轻微增加;采用旋转刚度适当较大的挠性接头则有利于减小隔水管挠性接头以下整体位移与弯矩。研究成果为钻井平台避台撤离时隔水管的安全提供理论指导。     

TECTONIC INDICATIONS OF OCCURRENCE OF MODERATE-TO-STRONG EARTHQUAKES IN CHAOHU-TONGLING AREA,ANHUI PROVINCE

The Chaohu-Tongling area in Anhui Province is a typical moderate-to-strong earthquake active area in the mainland of China. Four earthquakes occurred in this area, displayed as a NNE-trending zonal distribution, including the 1585 M5(3/4) Chaoxian earthquake and the 1654 M5(1/4) Lujiang earthquake, which formed a striking moderate-to-strong seismic activity zone. Field survey, shallow geophysical prospecting, drilling data, collection and dating of chronology samples and comprehensive analysis of fault activity indicate that the Fanshan, Xiajialing and Langcun faults are not active since Quaternary. The NNE-trending Tongling Fault is a buried middle-Pleistocene fault, but it can produce moderate-to-strong earthquakes and control the evolution and development of three en echelon geologic structures. The intensity of the four earthquakes is characterized by southward progressive decrease, which is in accordance with the characteristics that the subsidence range of Wuwei Basin is obviously larger than that of Guichi Basin to its south since late Cenozoic. In terms of deep structure, the characteristics of spatial distribution of Tongling Fault indicate that it corresponds to a NNE-striking Bouguer gravity anomaly gradient belt. So there is a spatial correspondence between the middle-Pleistocene Tongling Fault, the en echelon structures, the differential movement of the neotectonics, the Bouguer gravity anomaly gradient belt and the moderate-to-strong seismic activity belt in the Chaohu-Tongling area, indicating that they should be the tectonic indications of occurrence for moderate-to-strong earthquakes.     

珠江三角洲海相沉积软土压缩和剪切变形特性试验研究

为了研究近代海相沉积软土的变形特征,本文对珠江三角洲河口地区的全新世海相沉积的软土进行了室内单轴压缩与不同围压下作用下的三轴固结不排水(CU)、不固结不排水(UU)的剪切试验。试验结果表明:原状土和重塑土样的孔隙比随压力的增大而下降,且与加压方式有密切关系,加压幅度越小,土的扰动破坏越小;原状土样固结系数随着压力增加而递减,整体近似符合指数函数分布,重塑土样固结系数随着压力增加逐渐增大,整体近似符合线性函数分布。在相同的固结压力下,原状土样的强度低于重塑土样的强度。土样的应力应变曲线为应变硬化型,且围压对重塑土的影响小于原状土。     

落地通信基站机房地震易损性及震后功能失效概率评估

机房是移动通信基站的重要组成部分,其地震易损性将决定基站在震后的功能状态,即基站所辖范围内的移动通信服务在震后是否可以正常使用。在对我国北方某市典型落地通信基站机房进行实地考察的基础上,确定了影响机房地震后使用功能的重要设施（即基站板房、内部走线架、通信机柜和蓄电池组）;随后采用有限元软件ABAQUS分别建立了这些设施的数值模型,通过Pushover分析确定了每种设施的损伤模式、损伤水平评价指标及其数值;通过IDA分析得到了每种设施的抗震性能,并通过对IDA分析结果的统计得到了这些重要设施的地震易损性曲线;最后,给出了基于故障树模型的典型通信基站机房震后功能评估的方法。该工作将作为基本环节用于城市及地区移动通信系统的地震后功能状态评估与预测。