不同季节的企鹅珍珠贝游离珠植核效果比较

在雷州流沙港湛江海洋大学珍珠研究室实验基地分别于春、夏和秋季进行了企鹅珍珠贝游离珠植核实验。其中，春季插核的死亡率最低，为15.1％--16．2％，留核率最高，为10％左右：而夏季插核的死亡率最高，为63．56％，留核率也仅为2．22％：秋季插核的留核率最低，仅收珠1颗，留核率为0．35％，死亡率也较高，为54.4％。结果表明，春季是企鹅珍珠贝较适宜的插核季节。     

The Working Mechanism and An Analytic Method of the Deep Embedded Large Cylinder Structure

The large cylinder is a new-type structure that has been applied to harbor and offshore engineering. An analytic method of the relationship between loads and the structure displacement is developed based on the failure mode of deep embedded large cylinder structures. It can be used to calculate directly the soil resistance and the ultirnate bearing capacity of the structure under usage. A new criterion of the large cylinder structure, which discriminates the deep embedded cylinder from the shallow embedded cylinder, is defined. Model tests prove that the proposed method is feasible for the analysis of deep embedded large cylinder structures.     

Grey Prediction of Siltation in North Channel of Yangtze Estuary

-The North Channel in the Yangtze Estuary is one of sea-leading waterways of Shanghai Harbour, in which yearly dredging volume reaches over ten million cubic meters, and it tends to increase year by year. Based on the channel regime similarity and through the relational grade, a GM (2, 1) is set up. It reveals the course of development of channel regime similarity under the action of various factors, and predicts the siltation volume in the nearest future which is the basis of dredging planning for relevant dredging departments.     

Prediction of Load Carrying Capacity of Corroded Reinforced Concrete Beam

A novel method for prediction of the load carrying capacity of a corroded reinforced concrete beam (CRCB) is presented in the paper. Nine reinforced concrete beams, which had been working in an aggressive environment for more than 10 years, were tested in the laboratory. Comprehensive tests, including flexural test, strength test for corroded concrete and rusty rebar, and pullout test for bond strength between concrete and rebar, were condueted. The flexural test results of CRCBs reveal that the distribution of surface cracks on the beams shows a fractal behavior. The relationship between the fractal dimensions and mechanical properties of CRCBs is then studied. A prediction model based on artificial neural network (ANN) is established by the use of the fractal dimension as the corrosion index, together with the basic intbrmation of the beam. The validity of the prediction model is demonstrated through the experimental data, and satisfactory resuits are achieved.     

Numerical study of the influence of Kuroshio Current on the thermocline in the sea area around Taiwan Island

1 INTsoDUcrIONTemperature is one of the most impoFtant essential factors of ocean, and its verticalstructure, especially the phenomenon ofthermocline, is concerned by military and manufacturepractices at all times. There are two classes of research methods for thermocIine, statisticmethod and numerical method. In recent years, more attention has been paid to the latterwhich becomes the primary development direction. Since Munk et al (1948) pot forward1-D model of thermocline at steady sta…     

In-Situ Observation of Fluid Mud in the North Passage of Yangtze Estuary, China

Observations of fluid mud were made in the lower North Passage of the Yangtze Estuary in February 2000, on 10 -11 August 2000, on 30 - 31 August 2000 (after two strong typhoons), on 21 - 24 August 2000 (neap tide) and on 3 -6 September 2000 (mean tide) respectively. In situ data show that the fluid mud in this area consists of fine cohesive sediment (median size 7.23 μm). The formation and movement of fluid mud varied during the neap-spring and flood-ebb tidal cycle. Observations suggest that fluid mud phenomena in this area may be categorised in a three-fold manner as slack water, storm and saltwedge features. The thickness of the fluid mud layer of slack water during the neap tide ranged from 0.2 to 0.96 m, whereas during the mean tide, the thickness ranged from 0.17 to 0.73 m, and the thickness of the fluid mud layer was larger during slack water than at the flood peak. Shoals cover an area of 800 km^2 with a water depth smaller than 5 m. Erosion of these extensive intertidal mudflats due to storm action provides an abundant sediment source. This is particularly significant in this estuary when the tidal level is lower than 5 m. The lower North Passage is a typical zone of saltwater wedging, so the saltwedge fluid mud has the most extensive spatial range in the estuary.     

碳水化合物的组合合成

碳水化合物的组合合成是一项新兴技术，该技术可以在短时间内合成大量用于进行生物活性筛选的寡糖及拟糖物。液相与固相合成技术可以极大地加快药物研究与开发进程。作者针对该技术在碳水化合物合成方面的研究进展情况进行讨论。     

Analysis of Offshore Oil Pipeline Floating Laying

-Based on the calculation model for the floating laying of the offshore oil pipeline, this paper analyses in detail the internal force, and deformation of the pipeline under a definite structural form (pipeline and buoy) and the way of pulling. The obtained results can be used for the buoy deployment, structure design, and the determination of pulling parameters (the pulling force of the cable and its length, etc.), providing an effective analysis method for floating pipeline-laying. A calculation example is given to show the related calculation process and the main results are analyzed and discussed.     

Theory and Practice of Soft Clay Engineering

-The shear strength and deformation properties of soft clay are discussed first. Then some methods for predicting the performance of soft clay foundation are proposed. Finally, case histories are presented to illustrate some discussed aspects of soft clay.     

The Effect of Internal Fluid on the Response of Vortex-Induced Vibration of Marine Risers

Based on Iwan‘s wake oseillator model developed with the classical van der Pol equalion, the differential equation for the response of the vortex-induced vihration (VIV) of the riser considering the effect of the internal flowing fluid and the external marine environmental condition is derived. The effect of the intermal flowing fluid on the response of VIV of the riser is studied by means of the Finite Element Method. The results show that the effect of the internal fluid velocity on the VIV of the riser is strong when the natural frequency of the riser is close to the vortex shedding frequency. In addition, the increase of the top tension can decrease the sensitivity of the riser to the internal fluid velocity.