改进的P-SVM支持向量机与遥感数据分类

本文介绍了将P-SVM算法引入多光谱/高分辨率遥感数据的分类, 并且展示了卫星ASTER和航空ADS40数字影像分类的技术过程和结果验证。结果表明：P-SVM方法的分类精度不低于SVM, 并减少了时耗。     

利用MODIS红外资料反演大气参数以及表层温度的研究

提出了用牛顿非线性迭代法同时反演大气参数和表层温度,该反演算法应用到我国渤海地区MODIS红外资料中,可反演得到中尺度范围内的大气温度、水汽廓线,其误差分别不超过1.5 K和18%.反演得到的表层温度、大气可降水量(TPW)和大气稳定度(TTI)与美国国家宇航局(NASA)MOD07产品相似.     

Numerical flow and performance analysis of a water-jet axial flow pump

The purpose of the present study is to investigate the performance and three-dimensional flow fields in a water-jet pump. TASCflow is employed to simulate the rotator-stator coupling flow field. A standard k-ε turbulence model combined with standard wall functions is used. In order to investigate the effect of a rear stator on flow fields, the flows in two water-jet pumps with and without a rear stator are studied. Computational fluid dynamics (CFD)-predicted overall performances are in good agreement with the experimental results. Then the flow fields, such as the pressure distribution on the blade surfaces, and the axial and tangential velocity distribution, especially the radial loading distribution, are investigated at different flow rates. In addition, the effects of a rear stator and different spacings between the rotor and the stator on the overall performance and the flow fields of the water-jet pump are also investigated.     

大菱鲆(Scophthalmus maximus)四个不同地理群体数量形态特征比较

采用聚类分析、单因子方差分析和主成分分析方法,对4个不同地理群体大菱鲆进行了12项形态性状的测定,比较了4个群体的外部形态特征。聚类分析结果表明,4种大菱鲆群体中,丹麦和挪威之间及英国和法国之间的差异较小,丹麦、挪威和英国、法国之间的差异较大。方差分析多重比较结果表明,4个群体在部分形态特征上表现出明显差异,其中,英国和法国群体、挪威和丹麦群体之间形态特征差异显著指标较少,丹麦群体和英国群体、丹麦群体和法国群体、挪成群体和英国群体、挪威群体和法国群体之间差异显著指标较多。主成分分析构建了3个反映形态特征信息的综合性指标——主成分1、主成分2和主成分3,三者的贡献率分别为38.663%、14.117%和8.976%,三个主成分的累积贡献率为61.756%.分析结果显示,英国和法国群体、挪威和丹麦群体之间形态差异不显著,丹麦群体和英国群体、丹麦群体和法国群体、挪威群体和英国群体、挪威群体和法国群体之间形态差异显著,且差异主要来源于主成分1,而主成分1主要由经方差分析多重比较差异显著的指标组成,显然,主成分分析与聚类分析、方差分析的结论基本上是类似的,它们从不同的角度反映了群体间的形态学差异.     

Comparison of ecophysiological characteristics between introduced and indigenous mangrove species in China

Due to its rapid growth, the introduced mangrove species Sonneratia apetala from Bangladesh has been widely used in mangrove restoration in southeastern China since 1985. As an indigenous mangrove species in Hainan, China, Sonneratia caseolaris was also planted in Guangdong Province for afforestation purposes. Both species have developed well in their new habitats, but their ecophysiological differences with the native mangrove species have not been studied. In this study, leaf gas exchange, water and nitrogen use efficiencies of two Sonneratia species were compared with those of selected native mangrove species (Avicennia marina, Aegiceras corniculatum, Kandelia candel, and Excoecaria agallocha) in Hainan and Shenzhen. The introduced S. apetala maintained lower carbon assimilation rate (A) and photosynthetic nitrogen use efficiency (PNUE) than the indigenous S. caseolaris. In Shenzhen, the two introduced Sonneratia had comparable photosynthetic rates and water use efficiency (WUE) with the native mangrove species, except that PNUE in S. caseolaris was significantly higher than in the native mangrove species. The two Sonneratia species showed significant overlap in PNUE and long-term WUE. Photosynthetic parameters derived from leaf photosynthetic light–response curves and A–C_i curves also suggested lower carbon assimilation capacities for the introduced Sonneratia than for the native mangrove species in both study sites. The lower light compensation point (LCP) of two introduced Sonneratia in both study sites also indicated a better adaptation to a low light regime than the native mangrove species. The results of photosynthetic capacities indicated that the introduced mangrove species have little competitive advantage over local native mangrove species in their respective new habitats.     

Numerical study on salinity stratification in the Pamlico River Estuary

The variations of current circulation, salt intrusion, and vertical stratification under different river flow and wind conditions in the Pamlico River Estuary (PRE) were investigated in this paper using a three-dimensional numerical model. The model was calibrated and verified against water level variation, temperature, and salinity variations during 2003 and 2001, respectively. Eight sensitivity tests were conducted with different river flow and wind conditions specified in the model. Model results show that salinity intruded further upstream under scenarios with low flow, downriver local wind, and remote-wind-caused water level set-up conditions. In contrast, the responses of salinity stratification to different environmental forcing functions were different in different portions of the estuary. Salinity stratification was enhanced under high flow condition at the lower part of the estuary, under upriver wind near the river mouth, under downriver wind at the upstream to middle portion of the estuary, and under remote-wind-caused water level set-up condition at the majority of the estuary except near the river mouth. Model results also show that across-channel wind tended to reduce salt intrusion and salinity stratification in the PRE through increased vertical mixing.     

海气通量算法在海上蒸发波导诊断中的应用

利用TOGA COARE Bulk Air-Sea Flux Algorithm3.0,建立了基于通量算法的蒸发波导模型(Flux Evaporation duct Model),并进行了环境敏感性分析,而且与Paulus-Jeske模型对比,进行误差敏感性分析,并开展了雷达探测评估的海上试验,较全面的阐述了基于通量算法的蒸发波导模型的性能。     

南沙群岛西部海域两柱状沉积物中碳和氮的分布和来源特征及埋藏通量估算

对位于南沙群岛海域西部近大陆架-残留沉积区(NS01站)和深海沉积区(NS02站)的2个沉积物柱状样进行了研究,测定了它们的粒度组成、CaCO3含量、总有机碳含量(TOC)、总碳含量(TC)、总有机物含量(TOM)和总氮含量(TN),估算了它们的埋藏通量及陆/海源TOC和TN的相对含量.结果表明,该海域沉积物主要是粒径小于63μm的细粒度组分,粒度组成随深度的变化很小.沉积物粒度不是控制CaCO3含量、TOC、TC、TOM、TN和TOC/TN垂向变化的主要因素.NS01站CaCO3含量、TOC、TC、TOM和TN的含量及埋藏通量均低于NS02站.NS01站TOC/TN随深度的变化主要受控于TN的变化,而NS02站则主要受控于TOC的变化.2个研究站位的TOC和TN均以海洋自生为主,NS01站沉积物中海洋自生TOC和TN的平均值分别为53.2%和81.4%,NS02站沉积物中海洋自生TOC和TN的平均值分别为64.5%和87.7%.     

导线网坐标差观测值相关平差方法研究

提出了利用普通间接平差和相关间接平差两种平差方法相结合,进行以坐标差作为观测值进行导线网相关平差的方法.在该平差方法中,利用普通的简介平差原理推求出坐标差观测值的相关协因数阵,并以此作为已知数据进行以坐标差观测值作为观测值的导线网的相关平差.     

浅析MapInfo到KML格式的数据转换过程中的技术方法

详细分析了GIS数据格式与KML数据格式的差异性和数据转换的技术瓶颈,并提出了解决方案和总体设计方法.以GIS中最常用的MapInfo数据格式为例,利用MapBasic语言在MapInfo平台上进行了二次开发,编写了一个数据转换插件,并基本实现了MapInfo到KML格式的数据转换.