The Working Mechanism and An Analytic Method of the Deep Embedded Large Cylinder Structure

The large cylinder is a new-type structure that has been applied to harbor and offshore engineering. An analytic method of the relationship between loads and the structure displacement is developed based on the failure mode of deep embedded large cylinder structures. It can be used to calculate directly the soil resistance and the ultirnate bearing capacity of the structure under usage. A new criterion of the large cylinder structure, which discriminates the deep embedded cylinder from the shallow embedded cylinder, is defined. Model tests prove that the proposed method is feasible for the analysis of deep embedded large cylinder structures.     

凡纳滨对虾高密度养殖实验

实验时间 4 0天 ,放苗密度 5 0 0尾 /m2 、10 0 0尾 /m2 。凡纳滨对虾初体长为 2 .5 88±0 .341cm ,初体重 (0 .2 39± 0 .0 86 ) g。养殖水体中放置筛绢隔断 ,在不换水的条件下 ,监测水体中无机磷、氨氮的变化趋势 ,初步实验高密度和分隔养殖的效果。结果表明 ,高、低密度氨氮、无机磷差异均为极显著 (P <0 .0 1) ;成活率、产量差异均为显著 (P <0 .0 5 )。高、低密度特定生长率 体重 差异不显著 (P >0 .0 5 )。观察到不同时间不同密度凡纳滨对虾对筛绢隔断的反应不同 ,表明对虾能利用隔断筛绢 ,从而有效提高养殖容量     

东太平洋多金属结核分布的二维趋势面分析

对规则网的 469个测站的多金属结核丰度和 93个测站的 Mn、 Cu、 Co、 Ni元素进行趋势面分析 ,经 F检验 ,各变量的变异性显著 ,拟合度较低 ,表明多金属结核丰度及 Mn、Cu、Co、Ni金属元素的控制因素比较复杂。趋势面分析结果与相关分析结果一致 ,Mn、Cu、Ni元素有极相似的趋势特征 ,有两个轴向分布 ,一个为东西向轴 ,高值区在东部 ,另一个为北西向轴 ,高值区在北西部 ;结核丰度与 Co也有极相似的趋势特征 ,高值区在西部。应用逐次趋势面分析的结果将结核丰度的地质特征分解成各种简单控制因素的叠加 ,使对多金属结核的控矿因素、分布规律和物质来源的研究方法多样化     

浙江省海塘塘顶高程的确定

介绍了浙江省海塘塘顶高程确定时所涉及的波浪爬高，越浪量等的计量，同时分析了1997年后浙江省海塘塘顶高程确定的方法，由已建海塘的塘顶高程分析可见，在背水坡和塘顶有保护措施的情况下，采用允许最大越波流量来控制海塘塘顶高程，可适当降低塘身高度。     

N,N''''-双癸酰基乙二胺二乙酸钠的合成与性能研究

以乙二胺和氯乙酸为原料,在低温常压下合成乙二胺二乙酸(EDDA),再以EDDA与癸酰氯反应制得N,N'-双癸酰基乙二胺二乙酸钠.采用核磁共振波谱确证了其结构;对产品的临界表面张力、起泡及稳泡能力、乳化能力及润湿渗透性能进行表征.在25℃时,N,N'-双癸酰基乙二胺二乙酸钠溶液的临界表面张力为28.1mN/m,临界胶束浓度为1.6×10-3 mol/L.显示出该产品有优良的起泡稳泡性能、乳化性能及润湿渗透性能,是1种优良的表面活性剂.     

海洋平台结构形状与拓扑优化设计

以实际环境荷载作用下的实际海洋导管架平台结构为对象，研究了海洋平台结构在风，流，海冰等多荷载模式和多荷载工况下的优化设计的理论方法和应用技术，建立了结构尺寸优化，形状优化和拓扑优化问题的统一模型。计算结果反映出形状优化比尺寸优化所得设计更优，而拓扑优化的设计效果最好。不同的荷载工况对应的最优拓扑形式不同，因此在实际设计中应考虑实际的荷载工况，选取不同的拓扑形式。     

An Application of Direct Ritz Method for Random Seismic Responses of Jacket Platforms

1 .IntroductionNowadays tremendous efforts have been devotedtothe analysis of randomseismic responses .Forexample ,American PetroleumInstitute (API) has declared that the analysis of randomseismic re-sponsesis a useful tool for safety inspection. Owing to the complexity of platformand randomness ofload,it is difficult to carry out the randomresponse analysis of a jacket platform. The conventionalrandomvibration methods ,such as square root of the sumof squares (SRSS) and complete quadratic…     

美国红鱼试养的初步研究

笔者自行培育的美国红鱼苗体长25～30mm．1996年6月上、中旬到当年12月中旬．其个体的平均重量分别达到了750g和800g，生长速度优于我国其他养殖鱼种。     

Prediction of Load Carrying Capacity of Corroded Reinforced Concrete Beam

A novel method for prediction of the load carrying capacity of a corroded reinforced concrete beam (CRCB) is presented in the paper. Nine reinforced concrete beams, which had been working in an aggressive environment for more than 10 years, were tested in the laboratory. Comprehensive tests, including flexural test, strength test for corroded concrete and rusty rebar, and pullout test for bond strength between concrete and rebar, were condueted. The flexural test results of CRCBs reveal that the distribution of surface cracks on the beams shows a fractal behavior. The relationship between the fractal dimensions and mechanical properties of CRCBs is then studied. A prediction model based on artificial neural network (ANN) is established by the use of the fractal dimension as the corrosion index, together with the basic intbrmation of the beam. The validity of the prediction model is demonstrated through the experimental data, and satisfactory resuits are achieved.     

Numerical study of the influence of Kuroshio Current on the thermocline in the sea area around Taiwan Island

1 INTsoDUcrIONTemperature is one of the most impoFtant essential factors of ocean, and its verticalstructure, especially the phenomenon ofthermocline, is concerned by military and manufacturepractices at all times. There are two classes of research methods for thermocIine, statisticmethod and numerical method. In recent years, more attention has been paid to the latterwhich becomes the primary development direction. Since Munk et al (1948) pot forward1-D model of thermocline at steady sta…