Theory of satellite ground-track crossovers

The fundamental geometry of satellite ground tracks and their crossover problem are investigated. For idealized nominal ground tracks, the geometry is governed by a few constant parameters whose variations lead to qualitative changes in the crossover solutions. On the basis that the theory to locate crossovers has not been studied in sufficient detail, such changes are described in regard to the number of crossover solutions in conjunction with their bifurcations. Employing the spinor algebra as a tool for establishing the ground-track crossing condition, numerical methodologies to locate crossovers appearing in general dual-satellite ground-track configurations are also presented. The methodologies are applied to precisely determined orbital ephemerides of the GEOSAT, ERS-1, and TOPEX/POSEIDON altimeter satellites. Received: 19 November 1996 / Accepted: 12 May 1997     

Electrization and spatial charge separation at the air bubbles exhalation that occurs during the coagulation growth of hail particles in a cloud. Part 1. Kinetics of the bubbles exhalation process caused by increasing temperature of overcooled cloud drops

Kinetics of the air bubbles exhalation process, which occurs in overcooled cloud drops when they hit the hail or graupel particles surface. Analytical relationship between a number of bubbles generated in a drop and their size depending on the degree of overcooling of cloud drops is revealed. It is shown that the air bubbles exhalation, which accompanies the coagulation growth of hail particles, occurs on the principle of “ebullition” of the liquid on the surface of a hail particle.     

Resting Stages of Plankton in Recent North Adriatic Sediments

Abstract. Plankton-derived resting stages were found in 26 sediment cores collected in the North Adriatic Sea; 46 morphotypes were identified, 38 were attributed to taxa according to their morphology and, in some hatching cases, also according to the morphology of the derived active forms. Six species of Dinophyta were recorded for the first time from the North Adriatic Sea. Each morphotype was described in detail. Twenty-nine resting stages were Dinophyta; one was a Chrysophyta; two were Tintinnina; and six were metazoans. At every site Dinophyta cysts were more abundant than Metazoa cysts. Cyst bank densities were variable, with empty forms generally more abundant than full ones; cyst concentrations were highest at the mouth of the Po River delta.     

A parameterisation for the threshold shear velocity to initiate deflation of dry and wet sediment

A new parameterisation for the threshold shear velocity to initiate deflation of dry and wet particles is presented. It is based on the balance of moments acting on particles at the instant of particle motion. The model hence includes a term for the aerodynamic forces, including the drag force, the lift force and the aerodynamic-moment force, and a term for the interparticle forces. The effect of gravitation is incorporated in both terms. Rather than using an implicit function for the effect of the aerodynamic forces as reported earlier in literature, a constant aerodynamic coefficient was introduced. From consideration of the van der Waals force between two particles, it was further shown that the effect of the interparticle cohesion force between two dry particles on the deflation threshold should be inversely proportional to the particle diameter squared. The interparticle force was further extended to include wet bonding forces. The latter were considered as the sum of capillary forces and adhesive forces. A model that expresses the capillary force as a function of particle diameter squared and the inverse of capillary potential was deduced from consideration of the well-known model of Fisher and the Young–Laplace equation. The adhesive force was assumed to be equal to tensile strength, and a function which is proportional to particle diameter squared and the inverse of the potential due to adhesive forces was derived. By combining the capillary-force model and the adhesive force model, the interparticle force due to wet bonding was simplified and written as a function of particle diameter squared and the inverse of matric potential. The latter was loglinearly related to the gravimetric moisture content, a relationship that is valid in the low-moisture content range that is important in the light of deflation of sediment by wind. By introducing a correction to force the relationship to converge to zero moisture content at oven dryness, the matric potential–moisture content relationship contained only one unknown model parameter, viz. moisture content at −1.5 MPa. Working out the model led to a rather simple parameterisation containing only three coefficients. Two parameters were incorporated in the term that applies to dry sediment and were determined by using experimental data as reported by Iversen and White [Sedimentology 29 (1982) 111]. The third parameter for the wet-sediment part of the model was determined from wind-tunnel experiments on prewetted sand and sandy loam aggregates. The model was validated using data from wind-tunnel experiments on the same but dry sediment, and on data obtained from simulations with the model of Chepil [Soil Sci. Soc. Am. Proc. 20 (1956) 288]. The experiments showed that soil aggregates should be treated as individual particles with a density equal to their bulk density. Furthermore, it was shown that the surface had to dry to a moisture content of about 75% of the moisture content at −1.5 MPa before deflation became sustained. The threshold shear velocities simulated with our model were found to be in good agreement with own observations and with simulations using Chepil's model.     

Changes in biocenoses of Kondopoga Bay, Lake Onego, under the effect of effluents from a pulp and paper mill

Long-term changes in the quantitative and structural characteristics of bacterio-, phyto-, zooplankton, and macrozoobenthos are studied in a water body subject to pollution by effluents of pulp and paper production. The key effect on the state of biocenoses is shown to be due to anthropogenic load and the qualitative changes in the composition of industrial wastes after nature protection measures taken at the plant. Differences are revealed in the character, stages, and direction of transformations in planktonic and benthic communities. The most significant changes in biota have taken place after the commissioning of biological treatment facilities and diffusing wastewater discharge, resulting in accelerated eutrophication of the basin and redistribution of transformed biocenoses over areas within the water body. A decrease in the load during production decline demonstrated the possible deeutrophication of the ecosystem.     

贵州兴义雄武背斜菁角地区龙潭组含铀砂岩地球化学特征及其意义

菁角地处于兴义市雄武背斜核部南东翼南西段,大地构造位置位于扬子板块与华南板块的结合部.前人主要对该地区的金矿进行了矿点地质特征、构造特征、矿体形态等方面的研究,但对岩石学特征、铀的赋存形式以及地球化学特征研究较少.本次研究利用TIMA扫面、显微镜下观察、地球化学分析等方法对矿石、围岩的岩石学特征、地球化学特征、风化作用和分选、源区岩石类型、铀的赋存形式等方面进行探究.TIMA扫面以及显微镜下观察的结果表明铀的赋存形式是以弥散状充填进黏土化(高岭石)裂隙中.菁脚地区地球化学分析显示,龙潭组砂岩中w(SiO2)为51.30％～91.55％,围岩主要类型为亚岩屑砂岩,矿石以及矿化岩石为岩屑砂屑岩,CIA(73.83～82.53)以及ICV指数表明矿石及矿化岩石较围岩成熟度高、风化程度强.测试样品均有较强的U正异常,含量为4.78～772.00×10-6,且U与∑REE,Sb元素呈现明显正相关,Zr与∑REE呈强的正相关(R=1).菁角地区铀的来源是热液在上升过程中萃取围岩中的铀,沿着层间构造破碎带充填进成熟度较高的黑色砂岩中富集而成,结合菁角地区岩石学特征、地球化学特征以及铀的赋存形式,推测菁脚金(铀)矿床为低温热液矿床.     

New P–T constraints on the Tamayen glaucophane‐bearing rocks,eastern Taiwan: Perple_X modelling results and geodynamic implications

New pseudosection modelling was applied to better constrain the P–T conditions and evolution of glaucophane‐bearing rocks in the Tamayen block of the Yuli belt, recognized as the world's youngest known blueschist complex. Based on the predominant clinoamphibole, textural relationships, and mineral compositions, these glaucophane‐bearing high‐P rocks can be divided into four types. We focused on the three containing garnet. The chief phase assemblages are (in decreasing mode): amphibole + quartz + epidote + garnet + chlorite + rutile/titanite (Type‐I), phengite + amphibole + quartz + garnet + chlorite + epidote + titanite + biotite + magnetite (Type‐II), and amphibole + quartz + albite + epidote + garnet + rutile + hematite + titanite (Type‐III). Amphibole exhibits compositional zoning from core to rim as follows: glaucophane → pargasitic amphibole → actinolite (Type‐I), barroisite → Mg‐katophorite/taramite → Fe‐glaucophane (Type‐II), glaucophane → winchite (Type‐III). Using petrographic data, mineral compositions and Perple_X modelling (pseudosections and superimposed isopleths), peak P–T conditions were determined as 13 ± 1 kbar and 550 ± 40 °C for Type‐I, 10.5 ± 0.5 kbar and 560 ± 30 °C for Type‐II (thermal peak) and 11 ± 1 kbar and 530 ± 30 °C for Type‐III. The calculations yield higher pressures and temperatures than previously thought; the difference is ~1–6 kbar and 50–200 °C. The three rock types record similar P–T retrograde paths with clockwise trajectories; all rocks followed trajectories with substantial pressure decrease under near‐isothermal conditions (Type‐I and Type‐III), with the probable exception of Type‐II where decompression followed colder geotherms. The P–T paths suggest a tectonic environment in which the rocks were exhumed from maximum depths of ~45 km within a subduction channel along a relative cold geothermal gradient of ~11–14 °C km^?1.