Rock salt mass in the Paleoproterozoic sequence of the Onega trough in Karelia (from the Onega parametric well data)

A thick (200 m) rock salt mass covering Late Archean granitoids was exposed for the first time in the Early Proterozoic volcanogenic-sedimentary formations in the Onega trough of the east Baltic Shield by the Onega parametric well. The mineral composition of salts, their geochemical features, and the isotopic composition of carbonate carbon and oxygen have been studied. After fluid inclusions present in salts, their metamorphism temperature and isotopic composition of helium and argon were determined. The obtained results give evidence of the fact that rock salts and magnesites associated with them were formed in an evaporate basin with participation of deep crustal processes. The age of the underlying granitoids (2.716 ± 9 Ma) is determined using the Pb—Pb method.     

Developing a modern pollen–climate calibration data set for Norway

Bjune, A. E., Birks, H. J. B., Peglar, S. M. & Odland, A. 2010: Developing a modern pollen–climate calibration data set for Norway. Boreas, Vol. 39, pp. 674–688. 10.1111/j.1502‐3885.2010.00158.x. ISSN 0300‐9483. Modern pollen–climate data sets consisting of modern pollen assemblages and modern climate data (mean July temperature and mean annual precipitation) have been developed for Norway based on 191 lakes and 321 lakes. The original 191‐lake data set was designed to optimize the distribution of the lakes sampled along the mean July temperature gradient, thereby fulfilling one of the most critical assumptions of weighted‐averaging regression and calibration and its relative, weighted‐averaging partial least‐squares regression. A further 130 surface samples of comparable taphonomy, taxonomic detail and analyst became available as a result of other projects. These 130 samples, all from new lakes, were added to the 191‐lake data set to create the 321‐lake data set. The collection and construction of these data sets are outlined. Numerical analyses involving generalized linear modelling, constrained ordination techniques, weighted‐averaging partial least‐squares regression, and two different cross‐validation procedures are used to asses the effects of increasing the size of the calibration data set from 191 to 321 lakes. The two data sets are used to reconstruct mean July temperature and mean annual precipitation for a Holocene site in northwest Norway and a Lateglacial site in west‐central Norway. Overall, little is to be gained by increasing the modern data set beyond about 200 lakes in terms of modern model performance statistics, but the down‐core reconstructions show less between‐sample variability and are thus potentially more plausible and realistic when based on the 321‐lake data set.     

Focusing and spatial resolution of electromagnetic three-coil sounders

Doklady Earth Sciences - Distribution density functions for the sensitivity of a three-coil sounder are constructed as the weighted mean rock volume between the in-phase surfaces of running...     

The Karoo Basin of South Africa: type basin for the coal-bearing deposits of southern Africa

The coal-bearing sediments and coal seams of the Karoo Basin, Southern Africa are described and discussed. The Karoo Basin is bounded on its southern margin by the Cape Fold Belt, onlaps onto the Kaapvaal Craton in the north and is classified as a foreland basin. Coal seams are present within the Early Permian Vryheid Formation and the Triassic Molteno Formation.The peats of the Vryheid Formation accumulated within swamps in a cool temperate climatic regime. Lower and upper delta plain, back-barrier and fluvial environments were associated with peat formation. Thick, laterally extensive coal seams have preferentially accumulated in fluvial environments. The coals are in general inertinite-rich and high in ash. However, increasing vitrinite and decreasing ash contents within seams occur from west to east across the coalfields. The Triassic Molteno coal seams accumulated with aerially restricted swamps in fluvial environments. These Molteno coals are thin, laterally impersistent, vitrinite-rich and shaly, and formed under a warm temperate climatic regime.Palaeoclimate, depositional systems, differential subsidence and basin tectonics influence to varying degrees, the maceral content, thickness and lateral extent of coal seams. However, the geographic position of peat-forming swamps within a foreland basin, coupled with basin tectonics and differential subsidence are envisaged as the primary controls on coal parameters. The Permian coals are situated in proximal positions on the passive margin of the foreland basin. Here, subsidence was limited which enhanced oxidation of organic matter and hence the formation of inertinitic coals. The coals in this tectonic setting are thick and laterally extensive. The Triassci coals are situated within the tectonically active foreland basin margin. Rapid subsidence and sedimentation rates occurred during peat formation which resulted in the preservation of thin, laterally impersistent, high ash, vitrinite-rich, shaly coals.     

Schorlomite: a discussion of the crystal chemistry, formula, and inter-species boundaries

Examination of schorlomite from ijolite at Magnet Cove (USA) and silicocarbonatite at Afrikanda (Russia), using electron-microprobe and hydrogen analyses, X-ray diffraction and Mössbauer spectroscopy, shows the complexity of substitution mechanisms operating in Ti-rich garnets. These substitutions involve incorporation of Na in the eightfold-coordinated X site, Fe²⁺ and Mg in the octahedrally coordinated Y site, and Fe³⁺, Al and Fe²⁺ in the tetrahedrally coordinated Z site. Substitutions Ti⁴⁺Fe³⁺Fe³⁺_–1Si_–1 and Ti⁴⁺Al³⁺Fe³⁺_–1Si_–1 are of major significance to the crystal chemistry of schorlomite, whereas Fe²⁺ enters the Z site in relatively minor quantities (<3% Fe). There is no evidence (either structural or indirect, such as discrepancies between the measured and calculated Fe²⁺ contents) for the presence of ^[6]Ti³⁺ or ^[4]Ti⁴⁺ in schorlomite. The simplified general formula of schorlomite can be written as Ca₃Ti⁴⁺₂[Si_3-x(Fe³⁺,Al,Fe²⁺)_xO₁₂], keeping in mind that the notion of end-member composition is inapplicable to this mineral. In the published analyses of schorlomite with low to moderate Zr contents, x ranges from 0.6 to 1.0, i.e. Ti⁴⁺ in the Y site is <2 and accompanied by appreciable amounts of lower-charged cations (in particular, Fe³⁺, Fe²⁺ and Mg). For classification purposes, the mole percentage of schorlomite can be determined as the amount of ^[6]Ti⁴⁺, balanced by substitutions in the Z site, relative to the total occupancy in the Y site: (^[6]Ti⁴⁺–^[6]Fe²⁺–^[6]Mg²⁺– ^[8]Na⁺)/2. In addition to the predominant schorlomite component, the crystals examined in this work contain significant (>15 mol.%) proportions of andradite (Ca₃Fe³⁺₂Si₃O₁₂), morimotoite (Ca₃Fe²⁺TiSi₃O₁₂), and Ca₃MgTiSi₃O₁₂. The importance of accurate quantitative determination and assignment of Fe, Ti and other cations to the crystallographic sites for petrogenetic studies is discussed.

A robust algorithm for ellipse-based discrete element modelling of granular materials

With recent research indicating the importance of the rolling mechanism of deformation in granular systems consisting of perfectly round particles, it has become popular to use ellipse-shaped particles in the Discrete Element Method (DEM) numerical model. Inherent in this technique is the need for accurately computing ellipse to ellipse intersection, in order to properly detect contact formation and compute relative contact velocities. However, the commonly used algorithms for computing ellipse-ellipse intersection are generally poorly conditioned and can be inaccurate. An alternate method for computing ellipse-ellipse intersection is developed and presented which results in a well-conditioned, stable and accurate contact detection method. These modification are incorporated into the general DEM algorithm.     

X-ray transient sources

The galactic distribution and physical nature of X-ray transient sources is investigated. Two types of transients are considered. The observational data on 41 X-ray transient sources are given, and the average parameters of hard and soft X-ray transients are estimated.     

Mantle(?) xenoliths in the carbonatites of northern Transbaikalia

The composition and nature of high-Cr minerals in lithic clasts from the carbonatites of the Veseloe occurrence, northern Transbaikalia, were considered. In order to determine their source, the Cr-bearing phases were compared with chromite, magnetite, and rutile from ultrabasic rocks, mantle xenoliths, and eclogites. It was suggested that the xenoclasts studied were formed at great depths, whereas the carbonatites were directly derived from the mantle rather than formed by the crustal differentiation of a silicate-carbonate melt.     

Solubility of alumina in orthopyroxene plus spinel as a geobarometer in complex systems. Applications to spinel-bearing alpine-type peridotites

The addition of Fe and Cr to the simple system MgO-SiO₂-Al₂O₃ markedly affects the activities of phases involved in the equilibrium

Power spectrum of brightness temperature fluctuations derived from solar eclipse observations at 2.8 GHz

In this paper we report on the MEM power spectrum analysis of brightness temperature fluctuations observed at 2.8 GHz during the total solar eclipse of 16 February 1980. The observed periodicities range from 3.5 min to 64 min. These periodicities may arise due to spatial and/or temporal variations in the solar radio emission. The observed periodicities imply presence of scale sizes ranging from 70,000 to 600,000 km assuming that the brightness fluctuations arise because of spatial variation only. On the other hand, if these fluctuations are due to temporal variation, the observed periodicities correspond well to predicted modes of solar global oscillations.