An improved specific interaction model for seawater at 25°C and 1 atmosphere total pressure

Equations recently developed by Pitzer are applied to a seawater model on the assumption that only interactions between ions of opposite charge sign are significant. This model is shown to give good agreement with available experimental data for the osmotic coefficient and for the mean-ion activity coefficients of the major electrolyte components. The results are compared with the predictions of the ion-association model and with a number of models using the concept of specific ionic interaction. The relative merits of the various models are discussed. Pitzer's original equations are modified to enable the calculation of conventional single-ion activity coefficients. These values are compared with those obtained on the basis of alternative conventions and an encouraging measure of agreement is observed. It is concluded that the new model introduces a fluency into the specific interaction approach that should greatly facilitate the incorporation of trace components into future models.     

A shipborne magnetic survey in Hudson Bay

A marine magnetic total-field survey of Hudson Bay was conducted from 1975 to 1978. Approximately 62 000 line-km of data, or 35 000 five-minute averages, were acquired. The data were corrected for secular variation by means of a polynomial in latitude, longitude, and time, first fitted to annual mean differences from nine observatories and then integrated over time. The data were corrected for diurnal and transient variations by means of a linear interpolation, over geomagnetic latitude, of running hourly mean values from two neighbouring magnetic stations (numbering seven in all). Crossover differences are analysed in terms of a mixture of normal distributions resulting from the intermittent transient variations, and indicate the effectiveness of the corrections. The variance of the data is reduced, as a result of the corrections, by 87% during quiet periods and by 53% during disturbed periods, the weighted variance being reduced by 66%. Navigational accuracy is estimated, from a novel method utilizing crossover differences and field gradients, to be approximately 300 m. Anomalies are presented in profile form, and discussed briefly.Contribution from the Earth Physics Branch No. 973.     

In situ tests for ice strength measurements

Ice effects have caused extensive damage. Enormous forces have been recorded. On the other hand, ice has been used as a structural material under various situations. To use ice beneficially and to assess the danger of ice forces, it is necessary to know the mechanical properties of ice.Results from the large number of ice tests carried out in laboratories show the difficulties of sampling and testing procedures. Most of the tests have not reproduced faithfully enough the conditions existing in nature. To obtain adequate results, laborious and slow samplings and preparations of test specimens have been necessary. Recently, extensive use has been made of in situ tests in order to reduce the number of factors whixh can induce errors in measurements. Large scale tests have simulated actual structures. General ice properties have become available from small-scale in situ tests. Since these tests give rapid results, a large number are already available with a good coverage of field conditions.A theoretical basis has been devised for these in situ tests which measure essentially the unconfined and confined compressive strengths of ice, and practical devices have been developed to execute these tests. A correlation of measurements from laboratory tests and in situ tests has established a link between natural and artificial environments. Brittle elastic and clastic theories have been applied, to find the best correlations for ice tests. Test results have been related to the mechanical properties as used in engineering practice.A very summary conclusion of results is that cold sea ice and cold fresh water ice are both very strong. However, depending on the load rate, ice can be quite brittle, which mitigates dangerous effects from ice action against massive structures.     

Nitrate assimilation by zooxanthellae maintained in laboratory culture

The ability of cultured zooxanthellae to use ammonium and nitrate was tested. The zooxanthellae were initially isolated from the anemone Aiptasia pulchella. The zooxanthellae were able to grow on media supplemented with either form of dissolved inorganic nitrogen (DIN) although ammonium was inhibitory above 300 μM. In accord with the intact symbiosis and freshly isolated algae, the cultured zooxanthellae took up ammonium. In contrast, the cultured algae demonstrated nitrate uptake and utilization. This was enhanced with DIN deprivation. Nitrate reductase was found in the algae and appeared to be inducible. Within the animal host, excretory ammonium may repress this induction.     

A general method for calculating three-dimensional laminar and turbulent boundary layers on ship hulls

A general method for representing the flow properties in the three-dimensional boundary layers around ship hulls of arbitrary shape is described. It makes use of an efficient two-point finite-diffirence schem to solve the boundary-layer equations and includes an algebraic eddy-viscosity representaion of the Reynolds-stress ternsor. The numericzal method contains novel and desirable features and allows the calculation of flows in which the circumferential velocity component contains regions of flow reversal across the boundary layer. The inviscid pressure distribution is determined with the Douglas-Neumann method which, if necessary, can conveniently allow for the boundary-layer displacement surface. To allow its application to ships, and particularly to those with double-elliptic and flat-bottomed hulls, a non-orthogonal coordinate system has been developed and is shown to be economical, precise and comparatively easy to use. Present calculations relate to zero Froude number but they can be extended to include the effects of a water wave and local regions of flow separation which may stem from bulbous-bow geometries.     

Secondary flow caused by differential roughness,Langmuir circulations,and their effect on the development of sand ribbons

The process of Differential Roughness Secondary Flow (DRSF), hitherto little recognized, recently was demonstrated in a wind tunnel and in a flume. It is suggested here the DRSF may, in the natural environment, play an important part in the persistence and sharp definition of sand ribbons, previously initiated by other processes. In 1980 Karl described a series of sand ribbons, alternating with exposed substrate, which he attributed to the effect of Langmuir circulations. Although Langmuir Circulation Secondary Flow (LCSF) may indeed, in some cases, initiate sand ribbons, the sharply-defined edges typical of these features are explained better by DRSF.