Effect of wave-directionality on second-order loads induced by the set-down

At first-order of approximation a sea-state may be considered as an infinite sum of Airy components with angular frequencies ω_i and wave-number vectors k_i. A second-order analysis shows the co-existence of long waves appearing at the difference frequencies ω_i—ω_j with wave-number vectors k_i—k_j. In shallow water they become appreciable in amplitudes and may induce slow-drift motion of moored structures.For small values of ω_i—ω_j,k_i—k_j may take all kinds of directions for an angular-spread wave system. Then it may be questioned how the in-line and transverse second-order accelerations compare to those obtained for a mono-directional wave-system.This analysis is carried out here by relating the spectra of the second-order horizontal accelerations to the directional wave-spectrum. Numerical applications are first performed for deep water. They show that at low frequencies, even for very narrowly spread wave systems, the transverse component is larger than the in-line component. In shallow water both components are dratically reduced as compared to the mono-directional case. As a consequence one may question the validity of model-testings or numerical models which take no account of the directionality of the wave-system.     

Imagery of the inhomogeneities of currents on the ocean surface state

The influence of inhomogeneities of surface currents on the intensity of breaking wind waves is considered and a model for the relation between whitecap contrasts and the tensor of current gradients is developed. The imagery of typical patterns of ocean currents is discussed. The results of field observations supporting this model are given.Translated by Mikhail M. Trufanov.     

The Bengal Fan: Some preliminary results from ODP drilling

Three deep holes, with a maximum penetration of 960 m below sea floor, were drilled into the distal Bengal Fan just south of the equator during ODP Leg 116. The entire section recovered is dominated by sandy silt and mud turbidites derived from the Ganges Delta and from the continental margin of the western Bay of Bengal, interbedded with thin pelagic clays and with biogenic turbidites probably from a local sea mount source. The effects of Hi-Malayan uplift, sea level fluctuations, local tectonics, and fan channel/lobe processes have closely interacted to produce the observed sedimentary record of the past 17 million years since the early Miocene.Coauthors include: James R. Cochran, Lamont-Doherty Geological Observatory (Co-chief scientist); Dorrik A. V. Stow, Nottingham University, England (Co-chief scientist); Christian A. Auroux, Texas A & M University, USA (ODP staff scientist); Kazou Amano, Ibaraki University, Japan; Peter S. Balson, British Geological Survey, Keyworth, Notts, England; Jacques Boulegue, Pierre & Marie Curie University, Paris, France; Garrett W. Brass, University of Miami, Florida, USA; Jeffrey Corrigan, University of Texas, Austin, USA; Stefan Gartner, Texas A & M University, USA; Stuart A. Hall, University of Houston, Texas, USA; Silvia Iaccarino, University of Parma, Italy; Toshio Ishizuka, University of Tokyo, Japan; trena Kacmarska, Mount Allison University, New Brunswick, Canada; Heidemarie Kassens, Kiel University, West Germany; Gregory Leger, Dalhousie University, Halifax, Nova Scotia, Canada; Franca Proto Decima, University of Padova, Italy; C. V. Raman, Andhra University, Visakhapatnam, India; William W. Sager, Texas A & M University, USA; Kozo Takahashi, Woods Hole Oceanographic Institution, USA; Thomas Thompson, 580 Euclid Ave, Boulder, Colo, USA; Jean-Jacques Tiercelin, University of Bretagne, Brest, France; Mark Townsend, University of Nottingham, England; Andreas Wetzel, Tubingen University, West Germany; N. P. Wijayananda, National Aquatatic Resource Agency, Colombo, Sri Lanka; and Colin Williams, Lamont-Doherty Geological Observatory.     

Descriptive Analysis and Classification of Benthic Communities in Some Mediterranean Coastal Lagoons (Central Italy)

Abstract. Benthic samples were taken seasonally at 32 stations in five coastal lagoons of Central Italy (Fogliano, Monaci, Caprolace, Fondi, and Lungo) during a two-year period (1982–1984). Composition and distribution of benthic populations in each lagoon as well as seasonal trends of species richness, density, diversity, and redundancy are presented and discussed.
The faunal differentiation appeared to be mainly due to the different degree of water exchange, both with marine and continental systems.     

Application of double bounded probability density function for analysis of ocean waves

Ocean waves and forces induced by them on offshore structures are random in nature. Experience has shown that short term statistics of wave heights can be described by the Rayleigh distribution for narrow band spectra (Longuet-Higgins, 1952) and that the long term statistics or the evaluation of design wave is based on certain well known extreme value distribution such as mixed Frechet distribution (Thom, 1973a, b).This paper presents a new application of the double bounded probability density function to describe the ocean wave statistics. The prime importance is to estimate the most probable maximum wave height for offshore structural designs.     

Trace metals in selected organisms from the Adriatic sea

Extensive surveys were made to establish the concentrations of several metals (Zn, Cd, Pb, Cu and Hg) in various marine organisms from different parts of the Adriatic Sea in the period from 1979 to 1985. The results obtained are based on analyses which were performed in conjunction with carefully tested procedures. Proper sampling, sample storage, treatment of samples and final analytical determination has excluded artefacts which would influence the accuracy, or cause contamination and/or trace metal losses.The metal concentrations in shellfish from the coastal areas of the Adriatic Sea are in the range of the lowest values obtained for similar organisms from other localities throughout the Mediterranean Sea. Special attention has been paid to the anthropogenic influence on trace metal concentrations in organisms living in the vicinity of domestic sewage and/or industrial waste-water outflows.     

Sea-structure interaction for tripod-type steel gravity platform

The paper deals with a numerical integrated procedure to calculate the effects of the interaction between sea waves and a tripod-type steel gravity platform. The main aspects to be taken into account for a reliable wave loading analysis of such a new type of platform are emphasized. Among them, the field perturbation effect due to the large bodies presence is analysed. Finally, some principal results in terms of structure global loads obtained by the numerical integrated procedure are presented.     

Waveform Shaping of Sonar Transducers for Improving the Vertical Resolution in Sub-bottom Sediments Profiling

Vertical resolution is of fundamental importance in sonar exploration and is directly related to the duration of the acoustic pulse generated by the transducer. The shorter the radiated pulse, the higher the vertical resolution. Many sub-bottom profiling sonar systems use piezoelectric transducers because they are reversible and well understood. Piezoelectric projectors are normally resonant transducers, which are intrinsically narrowband. A piezoelectric transducer is usually driven by a tone-burst. However, it is possible to use Fourier techniques to find a pre-compensated electrical driving function so that the transducer radiates a prescribed wider band acoustic waveform. This technique can be applied to synthesize zero-phase cosine-magnitude, Gaussian, and bionic pulses, with a conventional sandwich transducer. Zero-phase cosine-magnitude waveforms provide minimum length pulses (and therefore maximum resolution) within a prescribed frequency band.The aim of this paper is to illustrate the synthesis of wideband acoustic pulses using an underwater piezoelectric projector. The conventional acoustic waveform radiated when a Tonpiltz transducer is transiently excited using a “click” and allows its frequency response function to be measured. This function is used to design the electrical signal which then drives the transducer so that it radiates the shortest pulse compatible with its mechanical response. The significant resolution enhancement of the waveform shaping process is illustrated by its application to a sediment wedge model.     

An application of a Markov-chain model of shore erosion for describing the dynamics of sediment flux

Acquisition of coastline retreat rate time sequences (RRTS) is an important component of Arctic coastal monitoring. These data can be used not only to estimate sediment input into the sea during a fixed time period, but also to dynamically simulate sediment flux intensity. The RRTS were investigated at the Marre-Sale (Kara Sea) and Malii Chukochii Cape (East Siberian Sea) key sites. Statistical analysis demonstrated that the RRTS possess Markov characteristic. This allowed coastline dynamics to be described using a Markov-chain model. A model is discussed that combines Markov characteristic and information about the composition and structure of the permafrost sediments to describe sediment flux dynamics.     

Using ocean ambient noise for array self-localization and self-synchronization

Estimates of the travel times between the elements of a bottom hydrophone array can be extracted from the time-averaged ambient noise cross-correlation function (NCF). This is confirmed using 11-min-long data blocks of ambient noise recordings that were collected in May 1995 near the southern California coast at an average depth of 21 m in the 150-700 Hz frequency range. Coherent horizontal wavefronts emerging from the time derivative of the NCF are obtained across the array's aperture and are related to the direct arrival time of the time-domain Green's function (TDGF). These coherent wavefronts are used for array element self-localization (AESL) and array element self-synchronization (AESS). The estimated array element locations are used to beamform on a towed source.