Automated co-registration of images from multiple bands of Liss-4 camera

Three multi-spectral bands of the Liss-4 camera of IRS-P6 satellite are physically separated in the focal plane in the along-track direction. The time separation of 2.1 s between the acquisition of first and last bands causes scan lines acquired by different bands to lie along different lines on the ground which are not parallel. Therefore, the raw images of multi-spectral bands need to be registered prior to any simple application like data visualization. This paper describes a method for co-registration of multiple bands of Liss-4 camera through photogrammetric means using the collinearity equations. A trajectory fit using the given ephemeris and attitude data, followed by direct georeferencing is being employed in this model. It is also augmented with a public domain DEM for the terrain dependent input to the model. Finer offsets after the application of this parametric technique are addressed by matching a small subsection of the bands (100×100 pixels) using an image-based method. Resampling is done by going back to original raw data when creating the product after refining image coordinates with the offsets. Two types of aligned products are defined in this paper and their operational flow is described. Datasets covering different types of terrain and also viewed with different geometries are studied with extensive number of points. The band-to-band registration (BBR) accuracies are reported. The algorithm described in this paper for co-registration of Liss-4 bands is an integral part of the software package Value Added Products generation System (VAPS) for operational generation of IRS-P6 data products.     

大都市区的形成机制及其定界：以北京为例

源于欧美的大都市区,在中国具有特殊的形成机制和联系形式。对北京的研究表明,其形成主要由中心城市工业化的扩散和农村非农业化两种过程所决定,并据此提出了中国大都市区定界的初步方法。进一步研究还发现中国已经出现了都市连绵带。     

南极数值天气预报应用与研究进展

多个业务化的全球预报模式和有限区域预报模式应用于南极地区,已经成为南极天气预报和南极气候诊断研究的主要工具.现今南极地区的数值天气预报模式在模拟南极大气环流和天气系统方面性能不够理想,原因是多方面的:南极天气气候的特殊性(包括边界层的参数化、中尺度气旋等)、模式对南极复杂地形的描述不够充分、由于缺乏观测资料而使得模式的...     

Martian rampart crater ejecta: Experiments and analysis of melt-water interaction

Viking images of Martian craters with rampart-bordered ejecta deposits reveal distinct impact ejecta morphology when compared to that associated with similar-sized craters on the Moon and Mercury. Topographic control of distribution, lobate and terraced margins, cross-cutting relationships, and multiple stratigraphic units are evidence for ejecta emplacement by surface flowage. It is suggested that target water explosively vaporized during impact alters initial ballistic trajectories of ejecta and produces surging flow emplacement. The dispersal of particulates during a series of controlled steam explosions generated by interaction of a thermite melt with water has been experimentally modeled. Preliminary results indicate that the mass ratio of water to melt and confining pressure control the degree of melt fragmentation (ejecta particle size) and the energy and mode of melt-ejecta dispersal. Study of terrestrial, lobate, volcanic ejecta produced by steam-blast explosions reveals that particle size and vapor to clast volume ratio are primary parameters characterizing the emplacement mechanism and deposit morphology. Martian crater ramparts are formed when ejecta surges lose fluidizing vapors and transported particles are deposited en masse. This deposition results from flow yield strength increasing above shear stress due to interparticle friction.     

Total N,total P and organic matters content in floodplain soils of Xianghai Nature Reserve

Soil sediment samples of 10 layers with a spacing of 10 cm each were collected in different floodplain zones adjacent to Huolin River in the Xianghai Nature Reserve, and contents of total N, total P and organic matters were analyzed. The results showed that contents of total N, total P and organic matters were generally decreasing with the increase of distance from sample locations to the river channel, and contents of the three items were generally higher in the upper soil layer than that in the lower soil layer. The content variations displayed how flooding functions influenced nutrient matter content variations in floodplain soils since the flood inundation frequencies of the sample locations varied. The correlation analysis displayed that there were remarkable relativities between total N, total P and organic matters within definite spatial distance from the Huolin River channel.     

Potential promoted productivity and spatial patterns of medium- and low-yield cropland land in China

With a continuously increasing population and better food consumption levels, improving the efficiency of arable land use and increasing its productivity have become fundamental strategies to meet the growing food security needs in China. A spatial distribution map of medium- and low-yield cropland is necessary to implement plans for cropland improvement. In this study, we developed a new method to identify high-, medium-, and low-yield cropland from Moderate Resolution Imaging Spectroradiometer (MODIS) data at a spatial resolution of 500 m. The method could be used to reflect the regional heterogeneity of cropland productivity because the classification standard was based on the regionalization of cropping systems in China. The results showed that the proportion of high-, medium-, and low-yield cropland in China was 21%, 39%, and 40%, respectively. About 75% of the low-yield cropland was located in hilly and mountainous areas, and about 53% of the high-yield cropland was located in plain areas. The five provinces with the largest area of high-yield cropland were all located in the Huang-Huai-Hai region, and the area amounted to 42% of the national high-yield cropland area. Meanwhile, the proportion of high-yield cropland was lower than 15% in Heilongjiang, Sichuan, and Inner Mongolia, which had the largest area allocated to cropland in China. If all the medium-yield cropland could be improved to the productive level of high-yield cropland and the low-yield cropland could be improved to the level of medium-yield cropland, the total productivity of the land would increase 19% and 24%, respectively.     

Morphometric and geological conditions for sediment accumulation in the Udava River,Outer Carpathians,Slovakia

The accumulation of sediment in river channels is a phenomenon that is not only influenced by the channel morphology, but also by the physical and geographical characteristics and the endogenous and exogenous processes taking place in the catchment. This paper presents an analysis of the impact the changes in lithological conditions have on the morphological and morphometric parameters of the Udava River channel and their relation to the channel accumulation forms representative of the river’s longitudinal profile as well as of its planform. Results document when accumulation forms occur and what is their spatial distribution within the longitudinal and cross-sectional river profiles. More resistant structures created sections with a lower degree of sedimentation, while in depression segments the degree of sedimentation was higher. With the increase in longitudinal slope, the impact of channel width on the average channel bar size increased. Also a difference in the accumulation was observed between the left and right bank which could be possibly explained by the impact of Coriolis force.     

Methods for extraction of microorganism DNA from glacier surface snow

In order to thoroughly investigate the diversity of glacier microorganisms, four DNA extraction methods with different lysis patterns were tested and two screened methods (the Bosshard-Bano method and the Zhou method) were optimized for the most effective form of the filter membrane (cut vs. uncut), the DNA extraction method, and the precipitation method. The two optimized methods were then compared with the commercial Mo-Bio DNA extraction kit, and the results showed that the kit was generally suitable for extraction of microorganism DNA from glacier surface snow. Procedurally, it was found that a modified Bosshard- Bano method (i.e., cutting the filter membrane into pieces, using a specific lysis pattern [lysozyme (5 mg/mL)-protease K (1 mg/mL)-CTAB (1%)-SDS (1%)], performing the extraction only once by chloroform-isoamyl alcohol (24:1), and conducting DNA precipitation by pure ethanol) was also an effective and less expensive method for extraction of microorganism DNA from glacier surface snow.     

Measurements of radio noise at 0.700 mc and 2.200 mc from a high-altitude rocket probe

Radio noise observations at frequencies of 0·700 Mc and 2·200 Mc were made at altitudes between 3000 and 11,000 km from a Blue Scout Jr. high-altitude rocket probe on 30 July 1963. A steady background flux of (7·5₋₃⁺⁶) × 10⁻¹⁹ W m⁻²)(c/s)⁻¹ at 0·700 Mc and (1·8^+1.0_−0.5 × 10⁻¹⁹ W m⁻² (c/s)⁻¹ at 2·200 Mc was observed. Assuming a galactic origin of the observed fluxes at both frequencies, the averaged sky brightnesses are b(0·700 Mc) = (6₋₃⁺⁵) × 10⁻²⁰ W m⁻² (c/s)⁻¹ sr⁻¹b(2·200 Mc) = (1.4^+1.0_−0.5 × 10⁻²⁰ W m⁻² (c/s)⁻¹ sr⁻¹ The observed brightness at 2·200 Mc is in reasonable agreement with the results of other observers. The apparent brightness at 0·700 Mc is, however, greater than was expected from previous observations. An alternative source of the 0·700 Mc flux in the terrestrial exosphere, as well as characteristics of several noise bursts observed during the flight, is briefly discussed.     

Physicochemistry and Mineralogy of Storm Dust and Dust Sediment in Northern China

Dust sediments collected from 1995 to 1998 in Beijing, Dunhuang, Inner Mongolia, Kashi, the Kunlun Mountains, Lanzhou, Ningxia, the Taklimakan Desert, and Xi‘an, China, were characterized in terms of their physical, chemical, and mineralogical properties. Most aerosols and dust analysed ranged in texture from silty clay to clay loam. Their median particle diameters (Mds) generally ranged between 5 to 63μm,coinciding with those of loess from central China and the finest sand from northwestern China. The dust sediments were characterized by a predominance of SiO2 and Al2O3, followed by K2O. Their SiO2/Al2O3and K2O/SiO2 molar ratios ranged from 5.17 to 8.43 and from 0.009 to 0.0368, respectively. The mass concentration spectrum during a dust storm showed a single peak, rather than the triple peak generally observed under clear sky conditions. The dominant minerals were chlorite, illite, calcite, and dolomite.These physical, chemical, and mineralogical properties were consistent with those of aeolian soils and loess in western and central China. The results suggest that aerosols and fine-gained fractions of dust sediments collected in northern China are mainly composed of soil material transported from the arid and semiarid regions of China and Mongolia by prevailing winds. The rate of deposition and properties of dust falling on eastern China were strongly influenced by meteorological conditions, season, latitude, longitude, and altitude of the sampling sites.