The neotectonics and geodynamics of the Lower Oka Region (East European Craton)

The neotectonic structures of the Lower Oka (Nizhneokskii) Region formed under different geodynamic conditions. This is attested by the morphology, orientation, internal structure, and jointing of the structures. The Oka-Tsna arc formed under the effect of tension from an inner source on the one hand and stress from the Alpian belt on the other hand. The latitudinally-oriented structures of the northwestern slope of the Tokmovo arc emerged as a result of uplift and widening. Both types of structure are combined within the limits of the Oka-Murom trough, which is a geodynamically active zone.     

The development of three-dimensional current system during a magnetospheric substorm

It is suggested that the pattern of three-dimensional substorm current circuit varies significantly even during the lifetime of a single substorm. This gives rise to quite complex time variations of the magnetic field at low latitude stations even for relatively isolated substorms. To verify this, three-dimensional current models with time dependent spatial variations are used to simulate one type of complex low-latitude “substorm signature”. It is shown that the utmost care should be exercised in determining different substorm phases on the basis of such a signature. The results indicate also that, in certain longitudes in the evening sector, one should expect distinct differences in characteristics between positive bays observed on the ground and at the synchronous distance.     

The formation of small cones in Isidis Planitia,Mars through mobilization of pyroclastic surge deposits

We investigate the distinctive distribution and pattern of subkilometer-sized cones in Isidis Planitia, and their relationship to the material that fills the basin. We observe that: (1) the cones show uniform size, spacing, and morphology across the entire basin; (2) they have large central depressions (relative to cone basal diameters) that are generally filled in and commonly show layering; (3) cone chains form highly organized spatial patterns; cones are also found in isolation and in dense fields; (4) many adjacent chains are parallel, and evenly spaced, creating a pattern that mimics lava flows that have experienced compressional folding; (5) no flows are associated with the cones, even where summit crater rims are breached; (6) the cones are at least temporally related to basin fill; (7) the basin fill material is largely fine-grained, but with locally indurated layers at shallow depth; blocks ejected by small craters from these locally indurated layers are commonly dark in color; and (8) relationships between cones along a chain show no systematic temporal formation sequence along the chain. We conclude that the basin was likely inundated by one or more hot, partially welded pyroclastic flows; devolatilization of these flows remobilized volcaniclastic material to form the cones without associated lava flows. The volume of gas required to account for the observed number of cones is low and does not require the presence of ground water or ice.     

Soil bentonite wall protects foundation from thrust faulting: analyses and experiment

When seismic thrust faults emerge on the ground surface,they are particularly damaging to buildings,bridges and lifelines that lie on the rupture path.To protect a structure founded on a rigid raft,a thick diaphragm-type soil bentonite wall(SBW) is installed in front of and near the foundation,at sufficient depth to intercept the propagating fault rupture.Extensive numerical analyses,verified against reduced–scale(1 g) split box physical model tests,reveal that such a wall,thanks to its high deformability and low shear resistance,"absorbs" the compressive thrust of the fault and forces the rupture to deviate upwards along its length.As a consequence,the foundation is left essentially intact.The effectiveness of SBW is demonstrated to depend on the exact location of the emerging fault and the magnitude of the fault offset.When the latter is large,the unprotected foundation experiences intolerable rigid-body rotation even if the foundation structural distress is not substantial.     

Application of saddlepoint approximation in reliability analysis of dynamic systems

The application of the saddlepoint approximation to reliability analysis of dynamic systems is investigated. The failure event in reliability problems is formulated as the exceedance of a single performance variable over a prescribed threshold level. The saddlepoint approximation technique provides a choice to estimate the cumulative distribution function (CDF) of the performance variable. The failure probability is obtained as the value of the complement CDF at a specif ied threshold. The method requires computing the saddlepoint from a simple algebraic equation that depends on the cumulant generating function (CGF) of the performance variable. A method for calculating the saddlepoint using random samples of the performance variable is presented. The applicable region of the saddlepoint approximation is discussed in detail. A 10-story shear building model with white noise excitation illustrates the accuracy and effi ciency of the proposed methodology.     

Lateral continuity of basement seismic reflections in 15 Ma ultrafast-spreading crust at ODP Site 1256

The Ocean Drilling Program (ODP) initiated drilling at Site 1256D in the Guatemala Basin, about 1,000 km off the East Pacific Rise to penetrate plutonic rocks, anticipated to be relatively shallow in this region, formed at an ultra-fast spreading rate. IODP Expedition E312 successfully drilled into gabbros at ~1,150 m in basement. Multi-channel seismic traces show weak laterally coherent sub-basement reflections at borehole depths. Synthetic reflectivity seismograms were computed using a Ricker wavelet and impedance profiles from borehole sonic logs. These seismograms show significant sub-basement amplitude peaks. A zero-offset vertical seismic profile, shot on E312, was processed to investigate the authenticity of these reflections and their relationship to borehole geology. A dual scheme of the median filtering and F–K dip filtering was used. Tests with synthetic seismograms indicate the approach is effective at reasonable SNR levels. Downgoing energy is clearly identified but negligible upgoing energy is visible over random noise. These results indicate that lava flows and igneous contacts in upper ocean crust have significant topography on lateral scales less than the Fresnel Zone (~300 m) due to igneous and tectonic processes.     

Star counts in M15 onU,B andV plates

We present new counts of stars in M15, using plates inB, V andU. We are able to explore relatively close to the central parts of the cluster (0.1 pc) and we derive the best fitting parameters for the star distribution.     

An inter-comparison of tidal solutions computed with a range of unstructured grid models of the Irish and Celtic Sea Regions

Three finite element codes, namely TELEMAC, ADCIRC and QUODDY, are used to compute the spatial distributions of the M₂, M₄ and M₆ components of the tide in the sea region off the west coast of Britain. This region is chosen because there is an accurate topographic dataset in the area and detailed open boundary M₂ tidal forcing for driving the model. In addition, accurate solutions (based upon comparisons with extensive observations) using uniform grid finite difference models forced with these open boundary data exist for comparison purposes. By using boundary forcing, bottom topography and bottom drag coefficients identical to those used in an earlier finite difference model, there is no danger of comparing finite element solutions for “untuned unoptimised solutions” with those from a “tuned optimised solution”. In addition, by placing the open boundary in all finite element calculations at the same location as that used in a previous finite difference model and using the same M₂ tidal boundary forcing and water depths, a like with like comparison of solutions derived with the various finite element models was possible. In addition, this open boundary was well removed from the shallow water region, namely the eastern Irish Sea where the higher harmonics were generated. Since these are not included in the open boundary, forcing their generation was determined by physical processes within the models. Consequently, an inter-comparison of these higher harmonics generated by the various finite element codes gives some indication of the degree of variability in the solution particularly in coastal regions from one finite element model to another. Initial calculations using high-resolution near-shore topography in the eastern Irish Sea and including “wetting and drying” showed that M₂ tidal amplitudes and phases in the region computed with TELEMAC were in good agreement with observations. The ADCIRC code gave amplitudes about 30 cm lower and phases about 8° higher. For the M₄ tide, in the eastern Irish Sea amplitudes computed with TELEMAC were about 4 cm higher than ADCIRC on average, with phase differences of order 5°. For the M₆ component, amplitudes and phases showed significant small-scale variability in the eastern Irish Sea, and no clear bias between the models could be found. Although setting a minimum water depth of 5 m in the near-shore region, hence removing wetting and drying, reduced the small-scale variability in the models, the differences in M₂ and M₄ tide between models remained. For M₆, a significant reduction in variability occurred in the eastern Irish Sea when a minimum 5-m water depth was specified. In this case, TELEMAC gave amplitudes that were 1 cm higher and phases 30° lower than ADCIRC on average. For QUODDY in the eastern Irish Sea, average M₂ tidal amplitudes were about 10 cm higher and phase 8° higher than those computed with TELEMAC. For M₄, amplitudes were approximately 2 cm higher with phases of order 15° higher in the northern part of the region and 15° lower in the southern part. For M₆ in the north of the region, amplitudes were 2 cm higher and about 2 cm lower in the south. Very rapid M₆ tidal-phase changes occurred in the near-shore regions. The lessons learned from this model inter-comparison study are summarised in the final section of the paper. In addition, the problems of performing a detailed model–model inter-comparison are discussed, as are the enormous difficulties of conducting a true model skill assessment that would require detailed measurements of tidal boundary forcing, near-shore topography and precise knowledge of bed types and bed forms. Such data are at present not available.