Analysis of mapping coverage obtained from spacecraft

An exact analysis of the coverage obtained by spacecraft using cross-track scanning and nadir-centered conical imaging, under imposed viewing obliqueness and resolution requirements, is presented. In addition to exact expressions for the area acquired and the area acquisition rate, envelope theory is introduced to obtain the boundary of the imaged area. These expressions are relatively compact, allowing rapid machine computation. The effects of the sun phase angle, and of imaging system limitations are also examined. The Galileo mission encounter with Callisto is used as a numerical example, from which certain general conclusions are drawn regarding optimal imaging trajectories.     

Capture of particles in hypervelocity impacts in aerogel

Abstract— The capture in aerogel of 106 μm diameter glass beads is investigated for impact speeds of 1 to 7.5 km s^?1. Three different aerogel densities were used, 60,96 and 180 kg m^?3. It was found that the length of the penetration track in the aerogel increases with speed until a maximum is reached. Above the maximum speed the track length decreases. This behaviour is similar to that which has previously been observed for particles impacting polystyrene foams and porous alumina. Whilst track length was not found to be an unambiguous indicator of impact speed, the excavated track volume was found to be a suitable indictor of speed. Further, it was possible to estimate the original particle size by measurements of the track volume and entrance hole size. In addition sub‐100 μm diameter particles composed of various minerals were fired into aerogel and the characterisation of the particles in situ by use of a Raman spectrometer was evaluated. This was found to work well, giving vibrational spectra essentially similar to those of the bulk minerals, thus providing a mineralogical rather than an elemental signature for the captured particles.     

The electron pressure in the outer atmosphere of ε Eri (K2 V)

Observations of ε Eri (K2 V) have been made with the Space Telescope Imaging Spectrograph on the Hubble Space Telescope . The spectra obtained show a number of emission lines which can be used to determine, or place limits on, the electron density and pressure. Values of the electron pressure are required in order to make quantitative models of the transition region and inner corona from absolute line fluxes, and to constrain semi-empirical models of the chromosphere. Using line flux ratios in Si  iii and O  iv a mean electron pressure of P _e= N _e T _e=4.8×10¹⁵ cm⁻³ K is derived. This value is compatible with the lower and upper limits to P _e found from flux ratios in C  iii , O  v and Fe  xii . Some inconsistencies which may be because of small uncertainties in the atomic data used are discussed.     

SARG: The High Resolution Spectrograph of TNG

SARG is a cross dispersed echelle spectrograph in operation since late spring 2000 at the Italian Telescopio Nazionale Galileo (TNG) 3.5 m telescope, La Palma. SARG offers both single object and long slit (up to 26 arcsec) observing modes covering a spectral range from λ = 0.37 up to1 μm, with resolution ranging from R = 29,000 up to R = 164,000. Cross dispersion is provided by means of a selection of four grisms; interference filters may be used for the long slit mode (up to 26 arcsec). A dioptric camera images the cross dispersed spectra onto a mosaic of two 2048 × 4096 EEV CCDs (pixel size: 13.5 μm) allowing complete spectral coverage at all resolving power for λ < 0.8 μm. In order to reach a high wavelength calibration precision an iodine-absorbing cell is provided. A Distributed Active Temperature Control System (DATCS) maintains constant the temperature of all spectrograph components at a preset value. Early results show that SARG works according to original specifications in terms of wavelength coverage, efficiency (measured peak efficiency is about 13%),resolution (maximum resolution R = 164,000 using a 0.3 arcsec slit, R ∼144,000 using an image slicer), and stability (preliminary estimates of radial velocity accuracy is ∼3 m/s using the iodine cell and ±150 m/s without the iodine cell). This revised version was published online in July 2006 with corrections to the Cover Date.     

A high speed near infrared photometer for lunar occultation studies

A recently developed near infrared high speed photometer intended for lunar oc-cultation studies is described. The primary scientific objective is to reach milli arc second levels of angular resolution so that circumstellar structure of the occulted sources can be resolved. Near infrared sky brightness close to the lunar limb is also studied. Angular diameter derived from the observed occultation of IRC +20169 is presented and system performance discussed.     

The BepiColombo Mercury surface element

Several versions of a Mercury surface element, part of the ESA BepiColombo Mercury Cornerstone mission to be launched in 2009, have been studied. The major constraint on system design has been the need to maximise the useful system mass on the surface of Mercury. The absence of atmosphere on the planet forces the adoption of a purely propulsive descent and landing system. The need to maintain the shock level at landing below limits which are acceptable to the payload imposes the adoption of a precise guidance, navigation & control system, which allows a drastic reduction of the landing speed, and therefore the adoption of an airbag landing system. Surface mobility is an obvious requirement for the purpose of geochemical exploration, since selected rocks have a much higher scientific yield than the average regolith. Geophysical investigations require that thermal, accelerometric, and densitometric probes be brought in contact with subsurface regions, to a depth of several metres. Magnetometric measurements may need deployment of sensors to some distance from the bulk of the lander body. The thermal environment on the surface of Mercury is extreme, even in the polar regions that will be targeted by the BepiColombo lander, while the solar flux rises seasonally to 10 times the one experienced in Earth orbit. The need to provide a low-temperature heat sink to sensors is particularly critical, if these are installed on a small-size, small-mass mobile deployment device. A consequence of the landing in a polar region will be the extremely variable lighting conditions, with extended portions of the surface shrouded in darkness by any small surface obstacle. Limitations on communications between Earth and the deployed payload will be caused by the low available data rate and by visibility windows (contact may be restricted to as little as <10 min every 9.5 h). This will impose a high degree of autonomy to be built into the payload systems.     

Rotational broadening and Doppler tomography of the quiescent X-ray nova Centaurus X-4

We present a library of 47 open-cluster integrated spectra, mostly obtained at CASLEO (San Juan, Argentina) in the range  3600 < λ < 7400 Å  , which are made available at CDS. The data are combined with previous spectra to obtain 10 high signal-to-noise ratio basic templates in the young and intermediate-age domains, which are also provided in the library. These Galactic disc templates represent the increased time resolution spectral evolution of a stellar population unit around the Solar metallicity level. The improved signal-to-noise ratio of the present templates with respect to previous template lists, together with their increased time resolution, allowed us to improve the fundamental parameters of some open clusters. The present spectral library will be useful for several astrophysical applications, particularly for population syntheses of star-forming giant galaxies.     

Multiple stellar populations in the Sextans dwarf spheroidal galaxy?

We present wide-field     multiband ( BVI ) CCD photometry (down to     of the very low surface brightness dwarf spheroidal galaxy Sextans. In the derived colour–magnitude diagrams we find evidence suggesting the presence of multiple stellar populations in this dwarf spheroidal. In particular, we discover (i) a blue horizontal branch tail that appears to lie on a brighter sequence with respect to the prominent red horizontal branch and the RR Lyrae stars, very similar to what was found by Majewski et al. for the Sculptor dwarf spheroidal, (ii) hints of a bimodal distribution in colour of the red giant branch stars, (iii) a double red giant branch bump. All of these features suggest that (at least) two components are present in the old stellar population of this galaxy: the main one with     and a minor component around     . The similarity to the Sculptor case may indicate that multiple star formation episodes are also common in the most nearby dwarf spheroidals that ceased their star formation activity at very early epochs.