The sedimentary and tectonic evolution of the Amur River and North Sakhalin Basin: new evidence from seismic stratigraphy and Neogene–Recent sediment budgets

The North Sakhalin Basin in the western Sea of Okhotsk has been the main site of sedimentation from the Amur River since the Early Miocene. In this article, we present regional seismic reflection data and a Neogene–Recent sediment budget to constrain the evolution of the basin and its sedimentary fill, and consider the implications for sediment flux from the Amur River, in particular testing models of continental‐scale Neogene drainage capture. The Amur‐derived basin‐fill history can be divided into five distinct stages: the first Amur‐derived sediments (>21–16.5 Ma) were deposited during a period of transtension along the Sakhalin‐Hokkaido Shear Zone, with moderately high sediment flux to the basin (71 Mt year^?1). The second stage sequence (16.5–10.4 Ma) was deposited following the cessation of transtension, and was characterised by a significant reduction in sediment flux (24 Mt year^?1) and widespread retrogradation of deltaic sediments. The third (10.4–5.3 Ma) and fourth (5.3–2.5 Ma) stages were characterised by progradation of deltaic sediments and an associated increase in sediment flux (48–60 Mt year^?1) to the basin. Significant uplift associated with regional transpression started during this time in southeastern Sakhalin, but the north‐eastward propagating strain did not reach the NE shelf of Sakhalin until the Pleistocene (<2.5 Ma). This uplift event, still ongoing today, resulted in recycling of older deltaic sediments from the island of Sakhalin, and contributed to a substantially increased total sediment flux to the adjacent basinal areas (165 Mt year^?1). Adjusted rates to discount these local erosional products (117 Mt year^?1) imply an Amur catchment‐wide increase in denudation rates during the Late Pliocene–Pleistocene; however, this was likely a result of global climatic and eustatic effects, combined with tectonic processes within the Amur catchment and possibly a smaller drainage capture event by the Sungari tributary, rather than continental‐scale drainage capture involving the entire upper Amur catchment.     

Discontinuity controlled probabilistic slope failure risk maps of the Altindag (settlement) region in Turkey

The evaluation of potential rock slope problems using stereographic projection techniques known as kinematic analysis is one of the most important parts of a slope stability investigation to be carried out in jointed rock media. In conventional stereoprojection techniques for the assessment of possible rock slope failures, the peak orientations of joints together with the slope geometry and the friction angle of the weakness planes are used. Other possible joint orientations which may be encountered in the rock media are ignored, although they belong to the group of joint peak orientations. In this study, nearly vertical jointed andesites cropped out at the Altindag settlement region in Ankara were studied in order to evaluate the relevance of this ignored discontinuity orientation data on slope stability. As a result, probabilistic risk maps for planar, toppling and wedge failures were produced using the kinematic rules and digital elevation model of the study area. The comparison of the distribution of the actual failures in the area and the probabilistic risk maps prepared for the study area revealed that all of the identified failures are found to be located in the higher risk zones on the probabilistic risk maps.     

Evidence for focused hot fluid flow within the Britannia Field, offshore Scotland, UK

Fluid inclusion and scanning electron microscope‐cathodoluminescence evidence indicates focused hot, saline, diagenetic fluid flow within the Eastern Flank of the Britannia Field, offshore Scotland, UK. The fluid was sourced from the Andrew Salt Dome, 10 km to the east. The fluids, which promoted quartz cementation of the upper zones within the field, were up to ～30°C hotter and had salinities up to ～10 wt% NaCl equivalent higher than fluids from lower in the reservoir section. During diagenesis hot saline fluids migrated westwards as part of a radiating ‘diagenetic front’ from the Andrew Salt Dome. Structural dip associated with the Eastern Flank of the Fladen Ground Spur impeded the westward movement of the diagenetic fluid. The quartz cements from the upper and lower reservoir zones can be distinguished by morphology. In the upper zones the quartz cements have well‐developed macro‐crystalline zoning and heterogeneous luminescence across the grain. In the lower zones, the cements are much less developed, unzoned and very weakly luminescent. The diagenetic fluids were primarily focused into Zone 45 within the upper reservoir. Furthermore, within the Main Platform Area the most prolific producing zone is Zone 45, indicating the importance of this interval as a permeable flow unit during both diagenetic and production timescales. Within the Eastern Flank, the quartz overgrowths have a major impact on reservoir permeability and thus well productivity. The overgrowths are most extensive in the originally clean sandstones with low clay content. Clay in optimum volumes (5–10%) can inhibit nucleation of the damaging quartz overgrowths without having a detrimental effect on pore connectivity. These observations provide a predictive concept for use in the search for relative reservoir sweetspots within the degraded Eastern Flank.     

Trace-element composition and zoning in clinopyroxene- and amphibole-group minerals: Implications for element partitioning and evolution of carbonatites

The present work is a first comprehensive study of the trace-element composition and zoning in clinopyroxene- and amphibole-group minerals from carbonatites, incorporating samples from 14 localities worldwide (Afrikanda, Aley, Alnö, Blue River, Eden Lake, Huayangchuan, Murun, Oka, Ozernaya Varaka, Ozernyi, Paint Lake, Pinghe, Prairie Lake, Turiy Mys). The new electron-microprobe data presented here significantly extend the known compositional range of clinopyroxenes and amphiboles from carbonatites. These data confirm that calcic and sodic clinopyroxenes from carbonatites are not separated by a compositional gap, instead forming an arcuate trend from nearly pure diopside through intermediate aegirine–augite compositions confined to a limited range of CaFeSi₂O₆ contents (15–45 mol%) to aegirine with < 25 mol% of CaMgSi₂O₆ and a negligible proportion of CaFeSi₂O₆. A large set of LA-ICPMS data shows that the clinopyroxenes of different composition are characterized by relatively low levels of Cr, Co and Ni (≤ 40 ppm) and manifold variations in the concentration of trivalent lithophile and some incompatible elements (1–150 ppm Sc, 26–6870 ppm V, 5–550 ppm Sr, 90–2360 ppm Zr, and nil to 150 ppm REE), recorded in some cases within a single crystal. The relative contribution of clinopyroxenes to the whole-rock Rb, Nb, Ta, Th and U budget is negligible. The major-element compositional range of amphiboles spans from alkali- and Al-poor members (tremolite) to Na–Al-rich Mg- or, less commonly, Fe-dominant members (magnesiohastingsite, hastingsite and pargasite), to calcic–sodic, sodic and potassic–sodic compositions intermediate between magnesio-ferrikatophorite, richterite, magnesioriebeckite, ferri-nyböite and (potassic-)magnesio-arfvedsonite. In comparison with the clinopyroxenes, the amphiboles contain similar levels of tetravalent high-field-strength elements (Ti, Zr and Hf) and compatible transition elements (Cr, Co and Ni), but are capable of incorporating much higher concentrations of Sc and incompatible elements (up to 500 ppm Sc, 43 ppm Rb, 1470 ppm Sr, 1230 ppm Ba, 80 ppm Pb, 1070 ppm REE, 140 ppm Y, and 180 ppm Nb). In some carbonatites, amphiboles contribute as much as 25% of the Zr + Hf, 15% of the Sr and 35% of the Rb + Ba whole-rock budget. Both clinopyroxenes and amphiboles may also host a significant share (~ 10%) of the bulk heavy-REE content. Our trace-element data show that the partitioning of REE between clinopyroxene (and, in some samples, amphibole) and the melt is clearly bimodal and requires a revision of the existing models assuming single-site REE partitioning. Clinopyroxenes and amphiboles from carbonatites exhibit a diversity of zoning patterns that cannot be explained exclusively on the basis of crystal chemistry and relative compatibility of different trace-element in these minerals. Paragenetic analysis indicates that in most cases, the observed zoning patterns develop in response to removal of selected trace elements by phases co-precipitating with clinopyroxene and amphibole (especially magnetite, fluorapatite, phlogopite and pyrochlore). With the exception of magnesiohastingsite–richterite sample from Afrikanda, the invariability of trace-element ratios in the majority of zoned clinopyroxene and amphibole crystals implies that fluids are not involved in the development of zoning in these minerals. The implications of the new trace-element data for mineral exploration targeting REE, Nb and other types of carbonatite-hosted rare-metal mineralization are discussed.     

Data base management system for erosivity values

In order to check the premature siltation of the reservoirs and guard against the drop in the irrigation potential, the Government of India has launched the schemes of soil conservation and integrated watershed management in the catchments of RVPs and Flood Prone rivers. Owing to the large financial and manpower commitments needed to implement and execute soil conservation measures over vast catchment areas, a priority approach for treatment was identified. The methodology developed for prioritization of watersheds of a catchment area conceptualizes sedimentation of the reservoirs as a multiplicative function of erosivity value and the delivery ratio. This paper deals with the development of a computerized data base software module ‘WEIGHT’ for determination of erosivity values for the mapping units comprising assemblages of the varying combinations of climate, physiography and slope, land use and cover conditions, soil characteristics (texture, solumn thickness, permeability and pH) and the existing erosion and soil conservation measures. The WEIGHT software package is coded in FORTRON-4 for PDP 11/83 operating system. the data base comprises storage of the attributes of the different erosivity determinants of the mapping units with predetermined erosivity values sequentially on a disk and comparing the attributes of a new mapping unit to get the most probabilities erosivity value. The objective has been to eliminate the personal bias and bring about the objectivity in the process of assigning erosivity values to the different mapping units. The data base design, design logic and operational sequence of the data base are discussed in the paper.     

A robust algorithm for ellipse-based discrete element modelling of granular materials

With recent research indicating the importance of the rolling mechanism of deformation in granular systems consisting of perfectly round particles, it has become popular to use ellipse-shaped particles in the Discrete Element Method (DEM) numerical model. Inherent in this technique is the need for accurately computing ellipse to ellipse intersection, in order to properly detect contact formation and compute relative contact velocities. However, the commonly used algorithms for computing ellipse-ellipse intersection are generally poorly conditioned and can be inaccurate. An alternate method for computing ellipse-ellipse intersection is developed and presented which results in a well-conditioned, stable and accurate contact detection method. These modification are incorporated into the general DEM algorithm.