Estimation of monotonic behavior of reinforced concrete columns considering shear‐flexure‐axial load interaction

Reinforced concrete columns with insufficient transverse reinforcement and non‐seismic reinforcement details are vulnerable to brittle shear failure and to loss of axial load carrying capacity in the event of a strong earthquake. In this paper, a procedure is presented after examining the application of two macro models for displacement‐based analysis of reinforced concrete columns subjected to lateral loads. In the proposed model, lateral load‐deformation response of the column is simulated by estimating flexural and shear deformation components separately while considering their interaction and then combining these together according to a set of rules depending upon column's yield, flexural and shear strengths. In addition, lateral deformation caused by reinforcement slip in beam–column joint regions and buckling of compression bars are taken into account and considered in the analysis. Implementation of the proposed procedure produces satisfactory lateral load–displacement relationships, which are comparable with experimental data. Copyright © 2012 John Wiley & Sons, Ltd.     

COMPARING TRADITIONAL METHODS FOR SELECTING CLASS INTERVALS ON CHOROPLETH MAPS*

The most common goal when classing data for choropleth maps is to create homogeneous classes which contain similar data values. None of the four traditional data classing methods examined here (quartile, equal interval, standard deviation, and natural breaks) consistently generalized the experimental data sets into homogeneous classes. These methods were most accurate for data sets with specific distributional characteristics, but none classed all of any type of distribution accurately. Only the optimization method produced reliable and accurate results for all of the experimental data.     

Abundance enhancements of silicon to iron in solar energetic particles and their implications

Differential energy spectra of low abundant elements between silicon and iron of energetic solar particles (SEP) in the August 4, 1972 event were measured in the energy region of 10 to 40 MeV amu^–1 using rocket-borne Lexan detectors. The relative abundances of elements were determined and abundance enhancements, i.e., SEP/photospheric ratios, and their energy dependence were derived in 10–40 MeV amu^–1 interval. It is found that there are four types of abundance enhancements as a function of energy as follows: (a) silicon, iron, and calcium show fairly strong energy dependence which decreases with increasing energy and at 20–40 MeV amu^–1 reaches photospheric values; (b) in case of sulphur enhancement factors are independent of energy and the values are close to unity; (c) argon shows energy independent enhancements of about 3 to 4 in 10–40 MeV amu^–1; (d) titanium and chromium show weakly energy-dependent, but very high abundance enhancement factor of about 10 to 40. These features are to be understood in terms of the atomic properties of these elements and on the physical conditions in the accelerating region. These are important not only for solar phenomena but also to gain insight into the abundance enhancements of cosmic-ray heavy nuclei.on leave from Tata Institute of Fundamental Research, Bombay, India.     

Mussels (Mytilus edulis) as ‘point source’ indicators of trace metal pollution

Using X-ray Energy Spectroscopy trace metal concentrations including Pb, Cu and Zn were studied in the common blue mussel, Mytilus edulis. These organisms, sampled at intervals of only 1 km and less for a line transect study of the port of Vancouver, Canada, exhibited dramatic concentration variations. In particular, mussels only 30 m from a point source of lead displayed essentially base-line concentrations, representing a decline of two orders of magnitude.     

Hydraulic redistribution and hydrological controls on aspen transpiration and establishment in peatlands following wildfire

In the sub‐humid Western Boreal Plains of Alberta, where evapotranspiration often exceeds precipitation, trembling aspen (Populus tremuloides Michx.) uplands often depend on adjacent peatlands for water supply through hydraulic redistribution. Wildfire is common in the Boreal Plains, so the resilience of the transfer of water from peatlands to uplands through roots immediately following wildfire may have implications for aspen succession. The objective of this research was to characterize post‐fire peatland‐upland hydraulic connectivity and assess controls on aspen transpiration (as a measure of stress and productivity) among landscape topographic positions. In May 2011, a wildfire affected 90,000 ha of north central Alberta, including the Utikuma Region Study Area (URSA). Portions of an URSA glacio‐fluval outwash lake catchment were burned, which included forests and a small peatland. Within 1 year after the fire, aspen were found to be growing in both the interior and margins of this peatland. Across recovering land units, transpiration varied along a topographic gradient of upland midslope (0.42 mm hr^?1) > upland hilltop (0.29 mm hr^?1) > margin (0.23 mm hr^?1) > peatland (0.10 mm hr^?1); similar trends were observed with leaf area and stem heights. Although volumetric water content was below field capacity, P. tremuloides were sustained through roots present, likely before fire, in peatland margins through hydraulic redistribution. Evidence for this was observed through the analysis of oxygen (δ¹⁸O) and hydrogen (δ²H) isotopes where upland xylem and peat core signatures were ?10.0‰ and ?117.8‰ and ?9.2‰ and ?114.0‰, respectively. This research highlights the potential importance of hydraulic redistribution to forest sustainability and recovery, in which the continued delivery of water may result in the encroachment of aspen into peatlands. As such, we suggest that through altering ecosystem services, peatland margins following fire may be at risk to aspen colonization during succession.     

Microbial–silica interactions in Icelandic hot spring sinter: possible analogues for some Precambrian siliceous stromatolites

Silicified deposits, such as sinters, occur in several modern geothermal environments, but the mechanisms of silicification (and crucially the role of microorganisms in their construction) are still largely unresolved. Detailed examination of siliceous sinter, in particular sections of microstromatolites growing at the Krisuvik hot spring, Iceland, reveals that biomineralization contributes a major component to the overall structure, with approximately half the sinter thickness attributed to silicified microorganisms. Almost all microorganisms observed under the scanning electron microscope (SEM) are mineralized, with epicellular silica ranging in thickness from < 5 μm coatings on individual cells, to regions where entire colonies are cemented together in an amorphous silica matrix tens of micrometres thick. Within the overall profile, there appears to be two very distinct types of laminae that alternate repeatedly throughout the microstromatolite: ‘microbial’ layers are predominantly consisting of filamentous, intact, vertically aligned, biomineralized cyanobacteria, identified as Calothrix and Fischerella sp.; and weakly laminated silica layers which appear to be devoid of any microbial component. The microbial layers commonly have a sharply defined base, overlying the weakly laminated silica, and a gradational upper surface merging into the weakly laminated silica. These cyclic laminations are probably explained by variations in microbial activity. Active growth during spring/summer allows the microorganisms to keep pace with silicification, with the cell surfaces facilitating silicification, while during their natural slow growth phase in the dark autumn/winter months silicification exceeds the bacteria’s ability to compensate (i.e. grow upwards). At this stage, the microbial colony is probably not essential to microstromatolite formation, with silicification presumably occurring abiogenically. When conditions once again become favourable for growth, recolonization of the solid silica surface by free‐living bacteria occurs: cell motility is not responsible for the laminations. We have also observed that microbial populations within the microstromatolite, some several mm in depth, appear viable, i.e. they still have their pigmentation, the trichomes are not collapsed, cell walls are unbroken, cytoplasm is still present and they proved culturable. This suggests that the bulk of silicification occurred rapidly, probably while the cells were still alive. Surprisingly, however, measurements of light transmittance through sections of the microstromatolite revealed that photosynthetically active light (PAL) only transmitted through the uppermost 2 mm. Therefore the ‘deeper’ microbial populations must have either: (i) altered their metabolic pathways; (ii) become metabolically inactive; or (iii) the deeper populations may be dominated by different microbial assemblages from that of the surface. From these collective observations, it now seems unequivocal that microstromatolite formation is intimately linked to microbial activity and that the sinter fabric results from a combination of biomineralization, cell growth and recolonization. Furthermore, the similarities in morphology and microbial component to some Precambrian stromatolites, preserved in primary chert, suggests that we may be witnessing contemporaneous biomineralization processes and growth patterns analogous to those of the early Earth.     

Defect structures in naturally deformed clinoamphiboles—a TEM study

Naturally deformed clinoamphiboles from the Selbu-Tydal and Forsbäck-Tärnaby areas of the Scandinavian Caledonides exhibit a well defined subgrain microstructure. From a transmission electron microscopy study (TEM), the subgrain boundaries are shown to consist of arrays of positive and negative screw dislocations with Burgers vector . Locally expanded loops are present having long screw segments. The subgrain boundaries are parallel to rational crystallographic planes of the type (hk0). The density of isolated dislocations within the subgrains is low. In addition planar defect structures parallel to (010) and bounded by screw dislocations with are observed. Based on metamorphic criteria the P−T values at the time of the amphibole growth have been estimated at 450°–600°C and 4–6 kbar, and these represent maximum conditions for the deformation. The present results indicate that slip on (hk0) [001] is an operative deformation mechanism in naturally deformed clinoamphiboles.     

The relationship between hydrodynamic properties and weathering of soils derived from volcanic rocks,Galapagos Islands (Ecuador)

The aim of this interdisciplinary study is to examine a component of the hydrological cycle in Galapagos by characterizing soil properties. Nine soil profiles were sampled on two islands. Their physical and hydrodynamic properties were analyzed, along with their mineralogical composition. Two groups of soils were identified, with major differences between them. The first group consists of soils located in the highlands (>350 m a.s.l.), characterized by low hydraulic conductivity (<10⁻⁵ m s⁻¹) and low porosity (<25%). These soils are thick (several meters) and homogeneous without coarse components. Their clay fraction is considerable and dominated by gibbsite. The second group includes soils located in the low parts of the islands (<300 m a.s.l.). These soils are characterized by high hydraulic conductivity (>10⁻³ m s⁻¹) and high porosity (>35%). The structure of these soils is heterogeneous and includes coarse materials. The physical properties of the soils are in good agreement with the variations of the rainfall according to the elevation, which appears as the main factor controlling the soil development. The clayey alteration products constrain soils physical and hydrodynamic properties by reducing the porosity and consequently the permeability and also by increasing water retention.     

Derivation of gold by oxidative metamorphism of a deep ductile shear zone: Part 1. Conceptual model

Quartz-carbonate gold deposits were emplaced in shear zones at or above the brittle-ductile transition. Some of the largest deposits are known to have formed along major, long-lived, transcurrent shears. Shears of this type widened downwards in the ductile regime, as a result of decreasing rock viscosity with depth; some were as wide as 40 km at depths of granulite facies metamorphism. Ductile shears are permeable and, since the permeability is along microfractures, fluid flow was pervasive, providing the opportunity for extensive chemical reaction. Reaction rates were enhanced by shear heating and by deformation-induced stress gradients in minerals, and reductions in grain size. Fluid flow tended to be upwards, because of pressure drop into the brittle portion of the shear. Given the wedge-shaped profile of ductile shears, fluids that had passed through a large volume of lower crust would have been focused at the brittle-ductile transition. Thus, if processes existed to selectively remove elements during fluid movement through the lower crust, these elements would also have been focused at this transition.One of the most constant features of quartz-carbonate lodes is carbonate alteration, which may extend kilometers out from major deposits. The ¹³C signature of this is consistent with a mantle source for the CO₂. Upward-moving CO₂ vapour of probable mantle origin has been implicated in the dehydration of amphibolite facies rocks to granulites and the concomitant depletion of large ion lithophile elements (LILE). The best documented cases of modification of the lower crust by CO₂ are from major shear zones. CO₂ streaming at depth could only have occurred under conditions more oxidizing than that required for graphite stability. These conditions favour solubility of gold by (a) oxidizing Au⁰ to Au⁺; (b) by dissolving sulphide from the rocks to complex with Au⁺. Recent work has shown that some major Archean gold deposits were derived from relatively oxidized fluids.A conceptual model is outlined for the genesis of at least some quartz-carbonate gold deposits. CO₂ permeating deep ductile shear zones dehydrated amphibolite facies rocks. A relatively oxidized CO₂-H₂O fluid was produced, which dissolved sulphide and gold from large volumes of lower crust. Gold was carried upwards in the narrowing shear, to be focused and precipitated at or above the brittle-ductile transition.