The fate of dumped sediments monitored by a high-resolution multibeam echosounder system,Weser Estuary,German Bight

With the development of high-resolution multibeam echosounder systems (MBES) for surveying shallow-water areas a new tool is available to monitor rapid changes in seabed morphology as, e.g., caused by the dumping of dredge spoil in coastal waters. In this study, four data sets of repeated bathymetric surveys with a MBES were processed and analyzed. The data were collected in a 1.94-km² dumping site in the outer Weser Estuary (German Bight). Between June and December 1998, 2.6 million m³ of dredged sediment were deposited there. The bathymetric maps generated in the course of this study reveal features such as subaqueous dunes, scour holes, and mounds of dumped dredge spoil. The mean water depth decreased by about 1 m during the dumping period. Furthermore, difference grids showing changes in sediment volume allowed a calculation of the sediment budget for the monitored area. After a time period of only 5 months, 0.5 million m³ of the originally dumped 2.6 million m³ of dredge spoil had already been removed from the dumping site.     

The Huelva (Spain) Tsunami-Ready Station and Its Interaction with Storm Emma (March 2018)

Abstract

The sea level station operating since 1996 at Mazagón (Huelva, Spain) has been progressively upgraded to fit tsunami warning requirements, due to its location in one of the main regions at risk. Its radar water level sensor was complemented in 2017, with the addition of a pressure sensor. The performance of both sea level sensors and their response to sea level oscillations, at different frequencies, is assessed. Particular emphasis is put on the effect of extreme events, such as Storm Emma, when alternative methods to obtain 1-min data are tested, in contrast to the one based on arithmetic means. The overall differences are small, for the whole period of study (centered-root-mean-square-error below 1?cm, for 5-min, and hourly data; similar tidal parameters and sea level oscillations with periods between 30?s and 5?min). However, during Storm Emma, the pressure sensor presents sensibly lower readings than the radar, with the centered-root-mean-square-error rising to 80?mm on the March 2^nd 2018. A new method to compute 1-min data, based on medians, reduced this value to 10?mm for the same day.     

Parabolic Wave Propagation Modelling in Orthogonal Coordinate Systems

This paper presents a numerical model study of the propagation of water waves using the parabolic approximation of the mild-slope equation in the orthogonal coordinate system. Two types of coordinate systems are studied: (a) a general form of orthogonal coordinate system and (b) the conformal system, a special form of orthogonal coordinate system. Two typical examples, namely, expanded breakwaters and a circular channel, are studied to validate the model. First, the examples are studied by use of the general orthogonal coordinates. Then the same examples are computed by use of the confonnal system. The computational results show that the confonnal coordinate system generally gives better predictions than the general orthogonal system. A numerical technique for generating the conformal grid is combined with the numerical model to improve the practicability of the model. The comparison between the result from the numerical grid system and that from the analytical grid system shows that reliable computational results can be obtained by use of the numerical confonnal grid system.     

Short-Term Benthic Recolonization after Dredging in the Harbour of Ceuta, North Africa

Abstract. The benthic recovery after dredging (area: 2625 m²) was studied in a polluted and enclosed area of the harbour of Ceuta, in which the recolonization through the water column (larvae and adult bedload transport) could be limited by the lack of renewal. The benthos was sampled at two sites (control and dredged) using a van Veen grab and adopting a BACI (Before, After, Control, Impacted) approach. Five samplings were conducted after dredging (3, 15, 30, 90, 180 days). The proportion of gravel in the sediment of the dredged site increased after dredging, while the organic matter decreased. The impact on the community was estimated at species level, using both univariate and multivariate analyses. The maximum negative effect on benthic macrofauna was a reduction by 65% for species richness (15 days after dredging) and by 75% for abundance (3 days after dredging). Between 15 and 30 days after dredging, the abundance of some species such as the molluscs Parvicardium exiguum and Retusa obtusa and the polychaete Pseudomalacoceros tridentata increased considerably in the dredged site, while typical ‘opportunistic’ species such as Capitella capitata were disfavoured by the disturbance. For this small‐scale dredging, about 6 months are required for the disturbed area to re‐establish a sediment structure and a macrobenthic community similar to the undisturbed area. Small‐patch dredging operations are proposed in harbour management whenever possible, since they allow a quick re‐adjustment of the initial sediment structure and benthic communities.     

Gas hydrate disturbance fabrics of southern Hydrate Ridge sediments (ODP Leg 204): Relationship with texture and physical properties

Soupy and mousse-like fabrics are disturbance sedimentary features that result from the dissociation of gas hydrate, a process that releases water. During the core retrieval process, soupy and mousse-like fabrics are produced in the gas hydrate-bearing sediments due to changes in pressure and temperature conditions. Therefore, the identification of soupy and mousse-like fabrics can be used as a proxy for the presence of gas hydrate in addition to other evidence, such as pore water freshening or anomalously cool temperature. We present here grain-size results, mineralogical composition and magnetic susceptibility data of soupy and mousse-like samples from the southern Hydrate Ridge (Cascadia accretionary complex) acquired during Leg 204 of the Ocean Drilling Program. In order to study the relationship between sedimentary texture and the presence of gas hydrates, we have compared these results with the main textural and compositional data available from the same area. Most of the disturbed analyzed samples from the summit and the western flank of southern Hydrate Ridge show a mean grain size coarser than the average mean grain size of the hemipelagic samples from the same area. The depositional features of the sediments are not recognised due to disturbance. However, their granulometric statistical parameters and distribution curves, and magnetic susceptibility logs indicate that they correspond to a turbidite facies. These results suggest that gas hydrates in the southern Hydrate Ridge could form preferentially in coarser grain-size layers that could act as conduits feeding gas from below the BSR. Two samples from the uppermost metres near the seafloor at the summit of the southern Hydrate Ridge show a finer mean grain-size value than the average of hemipelagic samples. They were located where the highest amount of gas hydrates was detected, suggesting that in this area the availability of methane gas was high enough to generate gas hydrates, even within low-permeability layers. The mineralogical composition of the soupy and mousse-like sediments does not show any specific characteristic with respect to the other samples from the southern Hydrate Ridge.     

In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies: A New Device

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).     

Size-Fractionated Primary Production Estimated by a Two-Phytoplankton Community Model Applicable to Ocean Color Remote Sensing

In order to estimate primary production from ocean color satellite data using the Vertical Generalized Production Model (VGPM; Behrenfeld and Falkowski, 1997), we propose a two-phytoplankton community model. This model is based on the two assumptions that changes in chlorophyll concentration result from changes of large-sized phytoplankton abundance, and chlorophyll specific productivity of phytoplankton tends to be inversely proportional to phytoplankton size. Based on the analysis of primary production data, P _opt ^B , which was one parameter in the VGPM, was modeled as a function of sea surface temperature and sea surface chlorophyll concentration. The two-phytoplankton community model incorporated into the VGPM gave good estimates in a relatively high productive area. Size-fractionated primary production was estimated by the two-phytoplankton community model, and P _opt ^B of small-sized phytoplankton was 4.5 times that of large-sized phytoplankton. This result fell into the ranges observed during field studies.     

Prediction of Load Carrying Capacity of Corroded Reinforced Concrete Beam

A novel method for prediction of the load carrying capacity of a corroded reinforced concrete beam (CRCB) is presented in the paper. Nine reinforced concrete beams, which had been working in an aggressive environment for more than 10 years, were tested in the laboratory. Comprehensive tests, including flexural test, strength test for corroded concrete and rusty rebar, and pullout test for bond strength between concrete and rebar, were condueted. The flexural test results of CRCBs reveal that the distribution of surface cracks on the beams shows a fractal behavior. The relationship between the fractal dimensions and mechanical properties of CRCBs is then studied. A prediction model based on artificial neural network (ANN) is established by the use of the fractal dimension as the corrosion index, together with the basic intbrmation of the beam. The validity of the prediction model is demonstrated through the experimental data, and satisfactory resuits are achieved.     

In-Situ Observation of Fluid Mud in the North Passage of Yangtze Estuary, China

Observations of fluid mud were made in the lower North Passage of the Yangtze Estuary in February 2000, on 10 -11 August 2000, on 30 - 31 August 2000 (after two strong typhoons), on 21 - 24 August 2000 (neap tide) and on 3 -6 September 2000 (mean tide) respectively. In situ data show that the fluid mud in this area consists of fine cohesive sediment (median size 7.23 μm). The formation and movement of fluid mud varied during the neap-spring and flood-ebb tidal cycle. Observations suggest that fluid mud phenomena in this area may be categorised in a three-fold manner as slack water, storm and saltwedge features. The thickness of the fluid mud layer of slack water during the neap tide ranged from 0.2 to 0.96 m, whereas during the mean tide, the thickness ranged from 0.17 to 0.73 m, and the thickness of the fluid mud layer was larger during slack water than at the flood peak. Shoals cover an area of 800 km^2 with a water depth smaller than 5 m. Erosion of these extensive intertidal mudflats due to storm action provides an abundant sediment source. This is particularly significant in this estuary when the tidal level is lower than 5 m. The lower North Passage is a typical zone of saltwater wedging, so the saltwedge fluid mud has the most extensive spatial range in the estuary.