Whole Ecosystem Evidence of Eutrophication Enhancement by Wetland Dredging in a Shallow Tropical Lake

The purpose of this research was to assess the effects of dredging performed in a marginal wetland colonized by aquatic macrophytes on eutrophication of the adjacent shallow tropical lake (Imboassica Lake, Brazil). The river mouth of the Imboassica River that drains into Imboassica Lake had been densely colonized by aquatic vegetation dominated by Typha domingensis (Pers.) when it was dredged. Total and dissolved nitrogen and phosphorus concentrations were measured monthly over 13 years at four stations in the Imboassica river-lake system. Dredging activities reduced phosphorus and nitrogen retention at the river mouth and subsequently increased these nutrient stocks in the lake waters. Nutrient retention by non-dredged wetland was estimated to be ca. 1,200 kg year⁻¹ (87.3 g m⁻² year⁻¹) for nitrogen and 60 kg year⁻¹ (4.5 g m⁻² year⁻¹) for phosphorus. Our whole-lake approach suggested that dredging might intensify rather than mitigate eutrophication in shallow tropical lakes when the removal of aquatic macrophytes is coupled to the persistence of anthropogenic nutrient inputs from the watershed.     

Metal concentrations, fluxes, inventories and chronologies in sediments from Sepetiba and Ribeira Bays: A comparative study

Three sediment cores were sampled at Sepetiba Bay and four cores at Ribeira Bay, Rio de Janeiro State, Brazil. Sediment accumulation rates and chronologies were obtained from ²¹⁰Pb activity-depth profiles. Sediment accumulation rates in Ribera Bay ranged from 1.2 mm y⁻¹ in the inner bay to 2.6 mm y⁻¹ close to its entrance. In Sepetiba Bay two sediment accumulation rates were observed: a lower rate of 0.35 cm y⁻¹ before the 1960s and 0.76 cm y⁻¹ since then. The cause of this change is due to the construction of the Santa Cecília impoundment (1955) that brings water from the Paraíba do Sul Basin into the Guandu River, which increased its flow from the original 20 m³ s⁻¹ to 160 m³ s⁻¹. Concentration of 44 elements was obtained by ICP-MS after total dissolution of samples from two selected cores. The relative differences between the concentrations of crustal elements, such as Al, Fe and Ti are only about 20% (p < 0.05). Cd and Zn are 15 and four times larger in Sepetiba Bay than in Ribeira Bay, respectively. Other major and minor elements show lower statistically significant differences. The enrichment factors and metal inventories show that Sepetiba Bay can be considered polluted with Bi, Cd, Cr, Cu, Sb and Zn. Particularly, Cd and Zn present concentrations three and four times higher than the Brazilian existing limits.     

Principal component analysis (PCA) and mineral associations of litoraneous facies of continental shelf carbonates from northeastern Brazil

The distribution of mineral phases according to the provenance of carbonate and terrigenous facies of carbonate sediments from a large area of the continental shelf of northeast Brazil was investigated using a major element multivariate analysis approach. Heavy minerals such as ilmenite are restricted to the litoraneous facies of the continental shelf of the states of Paraíba and Pernambuco, and clay minerals are found in distal facies of the continental shelf of the State of Ceará. In the carbonate fraction, composed essentially by Mg-calcite and aragonite, there is co-variation between CaO/MgO and bathimetry in part of the studied continental shelf from depths between 15 and 20 m, apparently due to influence of the seawater temperature, degree of oxygenation and luminosity. The terrigenous facies are mainly composed of quartz, clay minerals, K-feldspars and micro-micaceous minerals, having Fe and Ti oxide and hydroxide minerals as major accessory phases. Major element behavior attests to the presence of arenaceous quartz-rich relict sediments in the 35, 60 and 80 m isobaths of the continental shelf of the state of Ceará which is here interpreted as a proxy of ancient coast lines during the Flandrian transgression.     

Small-Scale Horizontal Variability of Mean and Turbulent Quantities in the Nocturnal Boundary Layer

The study of the boundary layer can be most difficult when it is in transition and forced by a complex surface, such as an urban area. Here, a novel combination of ground-based remote sensing and in situ instrumentation in central London, UK, is deployed, aiming to capture the full evolution of the urban boundary layer (UBL) from night-time until the fully-developed convective phase. In contrast with the night-time stable boundary layer observed over rural areas, the night-time UBL is weakly convective. Therefore, a new approach for the detection of the morning-transition and rapid-growth phases is introduced, based on the sharp, quasi-linear increase of the mixing height. The urban morning-transition phase varied in duration between 0.5 and 4 h and the growth rate of the mixing layer during the rapid-growth phase had a strong positive relationship with the convective velocity scale, and a weaker, negative relationship with wind speed. Wind shear was found to be higher during the night-time and morning-transition phases than the rapid-growth phase and the shear production of turbulent kinetic energy near the mixing-layer top was around six times larger than surface shear production in summer, and around 1.5 times larger in winter. In summer under low winds, low-level jets dominated the UBL, and shear production was greater than buoyant production during the night-time and the morning-transition phase near the mixing-layer top. Within the rapid-growth phase, buoyant production dominated at the surface, but shear production dominated in the upper half of the UBL. These results imply that regional flows such as low-level jets play an important role alongside surface forcing in determining UBL structure and growth.     

GGR Biennial Critical Review: Analytical Developments Since 2012

Advances in the chemical, crystallographic and isotopic characterisation of geological and environmental materials can often be ascribed to technological improvements in analytical hardware or to innovative approaches to data acquisition and/or its interpretation. This biennial review addresses key laboratory methods that form much of the foundation for analytical geochemistry; again, this contribution is presented as a compendium of laboratory techniques. We highlight advances that have appeared since January 2012 and that are of particular significance for the chemical and isotopic characterisation of geomaterials. Prominent scientists from the selected analytical fields present publications they judge to be particular noteworthy, providing background information about the method and assessing where further opportunities might be anticipated. In addition to the well‐established technologies such as thermal ionisation mass spectrometry and plasma emission spectroscopy, this publication also presents new or rapidly growing methods such as electron backscattered diffraction analysis and atom probe tomography – a very sensitive method providing atomic scale information.     

Biomarkers in croakers Micropogonias furnieri (Teleostei: Sciaenidae) from polluted and non-polluted areas from the Patos Lagoon estuary (Southern Brazil): evidences of genotoxic and immunological effects

Biomarkers of exposure and effect of pollutants were analyzed in croakers Micropogonias furnieri (Teleostei: Sciaenidae) captured in winter and summer in a polluted and in a non-polluted site at the Patos Lagoon estuary (Southern Brazil). Catalase and glutathione S-transferase activities (exposure biomarkers) and lipid peroxidation (effect biomarker) were analyzed in liver samples. Other two effect biomarkers were also studied: blood cells DNA damage (through comet assay and micronucleus test) and respiratory burst measurements. In a broad view, results point to an important seasonal variation of the biochemical biomarkers analyzed. However, data obtained clearly indicate that croakers collected in winter at the polluted site were subjected to a level of clastogenic agents sufficient to generate irreversible genetic damages (mutations) and impair the fish immune system.     

Dual polarization radar Lagrangian parameters: a statistics-based probabilistic nowcasting model

The aim of this study is to present a statistics-based Lagrangian nowcasting model to predict intense rainfall convective events based on dual polarization radar parameters. The data employed in this study are from X-band radar collected during the CHUVA-Vale campaign from November 2011 to March 2012 in southeast Brazil. The model was designed to catch the important physical characteristics of storms, such as the presence of supercooled water above 0 °C isotherm, vertical ice crystals in high levels, graupel development in the mixed-phase layer and storm vertical growth, using polarimetric radar in the mixed-phase layer. These parameters are based on different polarimetric radar quantities in the mixed phase, such as negative differential reflectivity (Z _DR) and specific differential phase (K _DP), low correlation coefficient (ρ _hv) and high reflectivity Z _h values. Storms were tracked to allow the Lagrangian temporal derivation. The model is based on the estimation of the proportion of radar echo volume in the mixed phase that is likely to be associated with intense storm hydrometeors. Thirteen parameters are used in this probabilistic nowcasting model, which is able to predict the potential for future storm development. The model distinguishes two different categories of storms, intense and non-intense rain cell events by determining how many parameters reach the “intense” storm threshold.     

First results on the LPO-derived seismic properties of iron ores from the Quadrilátero Ferrífero region, southeastern Brazil

The role of hydrothermal fluids in assisting the activity of strike-slip faults is investigated using a range of new geological, geophysical, and geochemical data obtained on the Argentat fault, Massif Central, France. This fault zone, 180-km-long and 6 to 8 km-width, has experienced coeval intense channeling of hydrothermal fluids and brittle deformation during a short time span (300–295 Ma). According to seismic data, the fault core is a 4-km-wide, vertical zone of high fracture density that rooted in the middle crust (~ 13 km) and that involved fluids in its deeper parts (9–13 km depth). If stress analyses in the fault core and strain analyses in the damage zone both support a left-lateral movement along the fault zone, it is inferred that hydrothermal fluids have strongly influenced fault development, and the resulting fault has influenced fluid flow. Fluid pressure made easier fracturing and faulting in zones of competent rocks units and along rheological boundaries. Repeated cycles of increase of fault-fracture permeability then overpressure of hydrothermal fluids at fault extremity favored strong and fast development of the crustal-scale strike-slip fault. The high permeability obtained along the fault zone permitted a decrease of coupling across the weak fault core. Connections between shallower and lower crustal fluids reservoirs precipitate the decrease of fault activity by quartz precipitation and sulfides deposition. The zones of intense hydrothermal alteration at shallows crustal levels and the zones of fluid overpressure at the base of the upper crust both controlled the final geometry of the crustal-scale fault zone.