Cretaceous stratigraphy and palaeoenvironments of the Southern Petén Basin, Guatemala

The Cretaceous deposits of the Southern Petén Basin, an oil-producing province, are located to the south of the Yucatan Platform and to the east of the Chiapas Carbonate Platform of Mexico. The succession in the southern part of this basin has been studied both in wells and at outcrop by microfacies analysis. It is composed of 5000 m of shallow marine carbonates and evaporites with a few thin layers of pelagic limestones rich in organic carbon and planktic foraminifera deposited during peak transgressions or maximum flooding. The sedimentation of this thick succession was not continuous, and the section is punctuated by subaerial erosional bounding surfaces and a single hardground which marks the final drowning of the carbonate platform during the late Maastrichtian. New age determinations have been obtained on the basis of planktic and benthic foraminifera from the Aptian to Santonian Cobán Formation, D, C, B and A Members. Cobán C (Albian) and B (Cenomanian) Members are the present oil reservoirs. The rudist and alveolinid limestones of late Campanian and Maastrichtian age referred to the Campur Formation in the Southern Petén Basin are here reassigned to the Angostura Formation, as recognized in the Chiapas area. The Actela Formation is defined here to encompass the limestone breccia deposits that occur at the Cretaceous–Tertiary boundary and extend into the Parvularugoglobigerina eugubina Zone of early Danian age. The D, C, B and A Members of the Cobán Formation and the Angostura Formation represent second order transgressive and regressive trends in a passive margin area where the deposits indicate a succession of various environments, including fluviatile, salinas, shallow marine carbonate platform, outer shelf and intrashelf basin. High subsidence rates, sea-level changes and tectonic uplift controlled the sedimentation.

Abstract

Les formations crétacées du sud-est du Bassin du Petén, région pétrolière du nord du Guatemala, sont situées au Sud du Yucatan et à l'Est du Chiapas au Mexique. Ces sédiments ont été étudiés à la fois dans deux puits et à l'affleurement par l'analyse des microfaciès. Cet ensemble sédimentaire est composé de 5000 m de carbonates de plate-forme de faible profondeur et d'évaporites, dans lesquels s'intercalent de minces couches de calcaires pélagiques riches en matière organique et en foraminifères planctoniques. Ces calcaires pélagiques se sont déposés lors des maximums de transgressions. La sédimentation de cette épaisse série n'est pas continue et est ponctuée par quelques surfaces d'érosion sub-aérienne et une surface durcie qui souligne l'ennoyage définitif de la plate-forme carbonatée au Maastrichtien terminal. De nouvelles datations ont été obtenues sur la formation Cobán et ses membres D, C, B et A qui s'étagent de l'Aptien au Santonien. Les membres C (albien) et B (cénomanien) constituent les réservoirs productifs. Les calcaires à rudistes et à alveolinidés du Campanien supérieur–Maastrichtien ont été appelés à tort au Petén formation Campur. Ils doivent, selon nous, être attribués à la formation Angostura comme au Chiapas voisin, où affleurent des faciès comparables et de même âge. Une nouvelle formation est créée (formation Actela) pour les brèches calcaires de la limite Crétacé–Tertiaire et de la Zone à Eugubina du Danien inférieur. Les membres D, C, B, A de la formation Cobán et la formation Angostura représentent des cycles transgressifs–régressifs de deuxième ordre. Sur cette marge passive du Petén, les dépôts correspondent à des environnements variés comme des terres émergées soumises à une altération karstique et à des dépôts fluviatiles, des salinas, des plates-formes carbonatées marines, des shelf externes et des bassins intra plate-forme. La sédimentation a été, ici, contrôlée par une forte vitesse de subsidence, les variations du niveau marin et des soulèvements tectoniques.     

Low calcification rates and calcium carbonate production in Porites panamensis at its northernmost geographic distribution

Porites panamensis is a hermatypic coral present in the eastern Pacific Ocean. Skeletal growth parameters have been reported, but studies of the relationship between annual calcification rates and environmental controls are scarce. In this study, we investigated three aspects of the annual calcification rates of P. panamensis: growth parameters among three P. panamensis populations; the sea surface temperature as a calcification rate control spanning a latitudinal gradient; and calcium carbonate production among three sites. Growth parameters varied among the sites due to the colony growth form. Massive colonies in the north showed a higher calcification rate than encrusting colonies in the south (mean: 1.22–0.49 g CaCO₃ · cm^?2 · yr^?1), where variations in calcification rates were related to growth rate (0.91–0.38 cm · yr^?1) rather than to skeletal density differences (overall mean ± SD, 1.31 ± 0.04 g CaCO₃ · cm^?3). Our results showed a positive linear relationship between annual calcification rates and sea surface temperatures within these P. panamensis populations. Differences were related to distinct oceanographic environments (within and at the entrance of the Gulf of California) with different sea surface temperature regimes and other chemical properties. Different populations calcified under different environmental conditions. Calcium carbonate production was dependent upon the calcification rate and coral cover and so carbonate production was higher in the north (coral cover 12%) than in the south (coral cover 3.5). Thus, the studied sites showed low calcium carbonate production (0.25–0.43 kg CaCO₃ · m^?2 · yr^?1). Our results showed reduced calcification rates, regional temperature regime control over calcification rates, different growth forms, low coral cover and low calcium carbonate production rates in P. panamensis.     

Post glacial lacustrine event sedimentation in an ancient mountain setting: Carboniferous Lake Malanzán (Western Argentina)

Lacustrine deposits of the Malanzán Formation record sedimentation in a small and narrow mountain paleovalley. Lake Malanzán was one of several water bodies formed in the Paganzo Basin during the Late Carboniferous deglaciation. Five sedimentary facies have been recognized. Facies A (Dropstones-bearing laminated mudstones) records deposition from suspension fall-out and probably underflow currents coupled with ice-rafting processes in a basin lake setting. Facies B (Ripple cross-laminated sandstones and siltstones) was deposited from low density turbidity currents in a lobe fringe environment. Facies C (Massive or graded sandstones) is thought to represent sedimentation from high and low density turbidity currents in sand lobes. Facies D (Folded sandstones and siltstones) was formed from slumping in proximal lobe environments. Facies E (Wave-rippled sandstones) records wave reworking of sands supplied by turbidity currents above wave base level.The Lake Malanzán succession is formed by stacked turbidite sand lobe deposits. These lobes were probably formed in proximal lacustrine settings, most likely relatively high gradient slopes. Paleocurrents indicate a dominant direction from cratonic areas to the WSW. Although the overall sequence shows a regressive trend from basin fine-grained deposits to deltaic and braided fluvial facies, individual lobe packages lack of definite vertical trends in bed thickness and grain size. This fact suggests aggradation from multiple-point sources, rather than progradation from single-point sources. Sedimentologic and paleoecologic evidence indicate high depositional rate and sediment supply. Deposition within the lake was largely dominated by event sedimentation. Low diversity trace fossil assemblages of opportunistic invertebrates indicate recolonization of event beds under stressed conditions.Three stages of lake evolutionary history have been distinguished. The vertical replacement of braided fluvial deposits by basinal facies indicates high subsidence and a lacustrine transgressive episode. This flooding event was probably linked to a notable base level rise during postglacial times. The second evolutionary stage was typified by the formation of sand turbidite lobes from downslope mass-movements. Lake history culminates with the progradation of deltaic and braided fluvial systems     

Unraveling complex hydrogeological processes in Andean basins in south‐central Chile: An integrated assessment to understand hydrological dissimilarity

Groundwater storage, drainage, and interbasin water exchange are common hydrological processes but often difficult to quantify due to a lack of local observations. We present a study of three volcanic mountainous watersheds located in south‐central Chile (~36.9 ° S) in the Chillán volcanic complex (Chillán, Renegado, and Diguillín river basins). These are neighboring basins that are similar with respect to the metrics normally available for characterization everywhere (e.g., precipitation, temperature, and land cover). In a hydrological sense, similar (proportional) behavior would be expected if these catchments would be characterized with this general information. However, these watersheds show dissimilar behavior when analyzed in detail. The surface water balance does not fit for any of these watersheds individually; however, the water balance of the whole system can be explained by likely interbasin water exchanges. The Renegado river basin has an average annual runoff per unit of area on the order of 60–65% less than those of the Diguillín and Chillán rivers, which is contradictory to the hydrological similarity among the basins. To understand the main processes that control streamflow generation, two analyses were performed: (a) basin metrics (land cover, geologic, topographic, and climatological maps) and hydro‐meteorological data analyses and (b) a water balance model approach. The analyses contribute to a plausible explanation for the hydrogeological processes in the system. The soils, topography, and geology of the Chillán–Renegado–Diguillín system favor the infiltration and groundwater movements from the Renegado river basin, mainly to the neighboring Diguillín basin. The interbasin water exchanges affect hydrological similarity and explain the differences observed in the hydrological processes of these three apparently similar volcanic basins. The results highlight the complexity of hydrological processes in volcanic mountainous systems and suggest that a simple watershed classification approach based on widely available data is insufficient. Simple local analyses such as specific flow analysis with a review of the geology and morphology can contribute to a better understanding of the hydrology of volcanic mountainous areas.     

Jurassic‐to‐present thermal history of the central High Atlas (Morocco) assessed by low‐temperature thermochronology

Apatite fission track (AFT) and (U–Th)/He data from the High Atlas have been obtained for the first time to constrain the tectono‐thermal evolution of the central part of the chain. Results from Palaeozoic basement massifs indicate long residence at low temperatures, consistently with their original location out of the deepest Mesozoic rift troughs and indicating minor exhumation. The best rocks for extracting the Alpine history of the Atlas Mountains are Jurassic intrusives, which yield AFT ages centred on c. 80 Ma; thermal models based on AFT data and constrained by (U–Th)/He suggest that these ages are included in a slow cooling trend from intrusion age to c. 50 Ma ago that we attribute to post‐rift thermal relaxation. This is followed by a stability period of c. 30 Ma and then by a final exhumational cooling until present exposure. Eocene intrusives yield AFT ages similar to those of Rb–Sr and K–Ar suggesting rapid emplacement in the uppermost crust.     

Modelling mechanical behaviour of limestone under reservoir conditions

High porosity and low permeability limestone has presented pore collapse. As fluid is withdrawn from these reservoirs, the effective stresses acting on the rock increase. If the strength of the rock is overcome, pore collapse may occur, leading to irreversible compaction of porous media with permeability and porosity reduction. It impacts on fluid withdrawal. Most of reservoirs have been discovered in weak formations, which are susceptible to this phenomenon. This work presents a study on the mechanical behaviour of a porous limestone from a reservoir located in Campos Basin, offshore Brazil. An experimental program was undergone in order to define its elastic plastic behaviour. The tests reproduced the loading path conditions expected in a reservoir under production. Parameters of the cap model were fitted to these tests and numerical simulations were run. The numerical simulations presented a good agreement with the experimental tests. Copyright © 2006 John Wiley & Sons, Ltd.     

Chlorinated hydrocarbons in the seawater and surface sediments of Blanca Bay,Argentina

In order to characterize our study area and to provide reference values to be used in the future to measure the changes produced by an increase in contamination, the concentrations of chlorinated hydrocarbons have been investigated in fifty-one samples of seawater, taken at four different depths: air-sea interface, surface, one metre and bottom waters, and in twenty-three samples of surface sediments from Blanca Bay, Argentina. Of eleven organochlorine compounds we were looking for (α BHC, lindane, heptachlor, δ BHC. aldrin, heptachlor epoxide, dieldrin, o-p′DDD, p-p′DDD, o-p′DDT and p-p′DDT), seven could be detected in seawater and three in surface sediments with the following mean concentrations: α-BHC=48·2 ng l^?1; lindane=54·2 ng l^?1; heptachlor=45·0 ng l^?1; δ BHC=12·5 ng l^?1; aldrin=61·8 ng l^?1 and ΣDDT=67·0 ng l^?1; and δ BHC=3·2 ng g^?1; lindane=4·2 ng g^?1 and heptachlor=1·0 ng g^?1 for seawater, regarding the surface waters, and sediment samples, respectively.Concentration factors among the different water layers were also studied to see if there was any correlation between chlorinated hydrocarbon contents and the water depths from which the samples were taken. As a mean value, the air-sea interface water contains 18 times more of these compounds than that of the water near the bottom. A comparison of the values corresponding to seawater and surface sediments from our study area with those levels measured in samples from other geographic locations is also presented.With the purpose to detect a relationship between chlorinated hydrocarbon concentrations and the contents of particulate matter (PM) on the one hand, and particulate organic material (POM) on the other hand, four groups of samples containing different amounts of PM and POM, respectively were formed. From a comparison of the results obtained, lindane, heptachlor and δ BHC showed a tendency to lower concentrations in those samples containing little PM whereas α BHC and aldrin remained without important changes. No significant correlation was found between organochlorine levels and contents of POM.     

Seismic risk in the city of Al Hoceima (north of Morocco) using the vulnerability index method,applied in Risk-UE project

Al Hoceima is one of the most seismic active regions in north of Morocco. It is demonstrated by the large seismic episodes reported in seismic catalogs and research studies. However, seismic risk is relatively high due to vulnerable buildings that are either old or don’t respect seismic standards. Our aim is to present a study about seismic risk and seismic scenarios for the city of Al Hoceima. The seismic vulnerability of the existing residential buildings was evaluated using the vulnerability index method (Risk-UE). It was chosen to be adapted and applied to the Moroccan constructions for its practicality and simple methodology. A visual inspection of 1102 buildings was carried out to assess the vulnerability factors. As for seismic hazard, it was evaluated in terms of macroseismic intensity for two scenarios (a deterministic and probabilistic scenario). The maps of seismic risk are represented by direct damage on buildings, damage to population and economic cost. According to the results, the main vulnerability index of the city is equal to 0.49 and the seismic risk is estimated as Slight (main damage grade equal to 0.9 for the deterministic scenario and 0.7 for the probabilistic scenario). However, Moderate to heavy damage is expected in areas located in the newer extensions, in both the east and west of the city. Important economic losses and damage to the population are expected in these areas as well. The maps elaborated can be a potential guide to the decision making in the field of seismic risk prevention and mitigation strategies in Al Hoceima.