Dynamic performance of twin curved cable‐stayed bridges

The dynamic behaviour of two curved cable‐stayed bridges, recently constructed in northern Italy, has been investigated by full‐scale testing and theoretical models. Two different excitation techniques were employed in the dynamic tests: traffic‐induced ambient vibrations and free vibrations. Since the modal behaviour identified from the two types of test are very well correlated and a greater number of normal modes was detected during ambient vibration tests, the validity of the ambient vibration survey is assessed in view of future monitoring. For both bridges, 11 vibration modes were identified in the frequency range of 0ndash;10Hz, being a one‐to‐one correspondence between the observed modes of the two bridges. Successively, the information obtained from the field tests was used to validate and improve 3D finite elements so that the dynamic performance of the two systems were assessed and compared based on both the experimental results and the updated theoretical models. Copyright © 2003 John Wiley & Sons, Ltd.     

An approach for quantifying geomorphological impacts for EIA of transportation infrastructures: a case study in northern Spain

A methodological proposal for the assessment of impacts due to linear infrastructures such as motorways, railways, etc. is presented. The approach proposed includes a series of specific issues to be addressed for each geomorphological feature analysed—both ‘static’ and ‘dynamic’—as well as a series of steps to be followed in the process.Geomorphic characteristics potentially affected were initially identified on the basis of a conceptual activities/impacts model that helps to single out geomorphic impacts related to environmental concerns for the area. The following issues were addressed for each individual impact: nature of potential effects; indicators that can be used to measure impacts; criteria of ‘geomorphologic performance’; procedure for measurement/prediction of changes; translation of geomorphologic impacts into significant terms from the viewpoint of human concerns; possible mitigation and/or compensation measures.The procedure has been applied to a case study corresponding to a new motorway in the Basque Country, northern Spain. Geomorphological impacts considered in this analysis included: (1) consumable resources; (2) sites of geomorphological interest; (3) land units with high potential for use, high productivity or value for conservation; (4) visual landscape; (5) slope instability processes. The procedure has been designed for implementation in a Geographic Information System (GIS) environment. Details are given on the application of the method to each individual impact analysed and results are presented in both numerical and map form.Impacts assessed were initially expressed by means of heterogeneous magnitudes, depending on the geomorphological feature considered. Those geomorphological impacts were then translated into significant terms and homogeneous magnitudes. Integration was carried out on the basis of impact values thus obtained. Final integrated results were also expressed in numerical and map form.The method proposed enables comparison of alternatives as well as ‘prediction’ and assessment of impacts in terms directly related to geomorphic characteristics. It also facilitates the expression of those impacts in terms that allow integration with other types of environmental impacts.     

Flexural and gravity modelling of the Mérida Andes and Barinas–Apure Basin, Western Venezuela

The kinematic evolution of the Barinas–Apure Basin and the southern Mérida Andes from Lower Miocene to the Present is numerically modelled using flexural isostatic theory and geophysical and geological data. Two published regional transects are used to build up a reference section, which is then used to constrain important parameters (e.g. shortenings and sedimentary thicknesses) for the flexural modelling. To control the location of the main fault system in the flexural model earthquake information is also used. The estimated flexural elastic thickness of the South American lithosphere beneath the Barinas–Apure Basin and the Mérida Andes Range is 25 km. The value for the final total shortening is 60 km. The flexural isostatic model shows that the Andean uplift has caused the South American lithosphere subsidence and the development of the Barinas–Apure Basin.In addition, gravity modelling was used to understand deep crustal features that could not be predicted by flexural theory. Consequently, the best-fit flexural model is used to build a gravity model across the Mérida Andes and the Barinas–Apure Basin preserving the best-controlled structural features from the flexural modelling (e.g. basin wavelength and depth) and slightly changing the main bodies density values and deep crustal structures. The final gravity model is intended to be representative of the major features affecting the gravity field in the study area. The predicted morphology in the lower crustal level of the final gravity model favours the hypothesis of a present delamination or megathrust of the Maracaibo crust over the South American Shield. This process would use the Conrad discontinuity as a main detachment surface within an incipient NW dipping continental subduction.     

Using stable isotope analyses to assess carbon dynamics in a shallow subtropical estuary

The sources of carbon, which fuel water column respiration, remain unresolved for most estuaries; our objective was to examine carbon dynamics in a shallow subtropical estuary. We sampled the Sabine-Neches estuary, Texas, during low (November 1999) and high (May 2000) freshwater inflow and measured stable carbon isotope ratios of the dissolved inorganic and orgnaic carbon (δ¹³C-DIC, δ¹³C-DOC), as well as quantifying accessory parameters (salinity, nutrients, total suspended solids, and photosynthetic pigments). Pigment analysis indicated that diatoms were the predominant phytoplankton. Data from the May 2000 sampling event exhibited conservative mixing, indicating that the system was acting as a conduit between the watershed and the Gulf of Mexico. During November, mixing was generally nonconservative indicating extensive recycling of allochthonous and autochthonous carbon sources. Our data imply that both carbon sources had similar isotope, ratios that made it impossible to unambiguously determine the dominant source supporting respiration. The nonconservative DIC concentration data indicating an autotrophic sink as well as the strong relationship between δ¹³C-DOC and chlorophylla, suggest that in situ production was an important component of the DOC pool. We hypothesize that uncharacteristically calm wind conditions during sampling may have promoted phytoplankton settling, removing autotrophs, from the water column, but leaving behind a dissolved biogeochemical signature. Interpretation of carbon dynamics may be confounded by spatial and temporal decoupling of producers and consumers from biogeochemical indicators.     

Groundwater contamination with arsenic and other trace elements in an area of the pampa,province of Córdoba,Argentina

A geochemical study of groundwater of the pampa in the province of Córdoba, Argentina, was performed; the area covered approximately 10,000 km².Physical-chemical parameters, dissolved solids, and seven trace elements were determined in 60 selected water samples. Systematic and accurate measurements of arsenic, flourine, and vanadium were performed for the first time. Three trace element contaminants not reported earlier were found: an important one, selenium, and two others of less known effects, uranium and molybdenum.Eighty-four percent of the water analyzed showed arsenic contents over 0.05 mg/L, maximum contaminant level established by the U.S. Environmental Protection Agency (1982). The frequency distribution of trace elements was analyzed, and its fit to the lognormal distribution was proved by means of the Pearson and Kolmogorov-Smirnov test; the geographic distribution of the seven trace elements was mapped and its correlation with the anion-cation composition of the water was studied.The maximum arsenic, fluorine, vanadium, and uranium contents were found in the western part of the area under study, in waters containing dominant alkali metals in the cation composition. Maximum selenium and antimony contents were found in the eastern part of the area, while molybdenum distribution does not show any relationship with the other two groups. In addition, the geographic distribution of the trace elements seems to be related to the subsurface structure, which has been inferred using interactive digital analysis of Landsat imagery. The movements of the subsoil have disturbed surface and subsurface drainage influencing the water salinity and trace element contents.In order to investigate the origin of the contamination, 54 loess samples were collected in wells at depths ranging from the surface down to the water table. This loess, which has a high proportion of volcanic components, mainly rhyolitic glass, exhibits a chemical composition corresponding to that of a dacite.The loess and the volcanic glass show anomalous contents of all contaminant trace elements, mainly arsenic and selenium. For this reason loess is considered the most important contamination source in the groundwater under study.     

Silica depleted melting of pelites. Petrogenetic grid and application to the Susqueda Aureole, Spain

Metapelitic rocks in the low pressure contact metamorphic aureole around the Susqueda igneous complex, Spain show a number of features that make them an ideal testing ground for the modelling of silica‐undersaturated melting. Rocks in the aureole experienced localized depletion in silica by the segregation of quartz veins during a pre‐anatectic, regional cordierite‐andalusite grade metamorphic event. These rocks were then intruded by gabbroic to dioritic rocks of the Susqueda igneous complex that formed a migmatitic contact metamorphic aureole in the country rocks. This migmatisation event caused quartz‐saturated hornfels and restite formation in rocks that had experienced no quartz vein segregation in the previous regional metamorphic event, but silica‐undersaturated melting in those rocks that were previously depleted in silica. Silica‐undersaturated melting is investigated using a new petrogenetic P–T projection and equilibrium pseudosections calculated in the KFMASH and NCKFMASH systems, respectively. The grid considers quartz absent equilibria and a range of phases that form typically in silica‐undersaturated bulk compositions, for example corundum. It is shown that the quartz‐rich precursors in the Susqueda contact aureole produced about 10% melt during contact metamorphism. However, most of this melt was extracted leaving behind rocks with restitic bulk compositions and minor leucosome segregation. It is suggested that the melt mixed with the host igneous rocks causing an apparent magmatic zoning from diorite in the centre of the complex to tonalite at the margins. In contrast, the quartz‐poor precursors (from which the quartz veins segregated) melted in the silica‐undersaturated field producing a range of assemblages including peritectic corundum and spinel. Melting of the silica‐undersaturated rocks produced only negligible melt and no subsequent melt loss.     

Trends in the frequency of synoptic types in central-southern Chile in the period 1961–2012 using the Jenkinson and Collison synoptic classification

Atmospheric circulation patterns in southern Chile (42° 30′ S) were studied in order to determine and analyse the most characteristic synoptic types and their recent trends, as well as to gain an understanding of how they are associated with low-frequency variability patterns. According to the Jenkinson and Collison (J&C) classification method, a 16-point grid of sea-level pressure data was employed. The findings reveal that some synoptic types show statistically significant trends with a 95% confidence level, positively for anticyclonic westerly hybrids (AW) and advective types for third and fourth quadrant wind flows (W, NW, and N) and negatively for SW and cyclonic hybrids (CS and CSW). A model has been constructed of the linear regression of some weather types with teleconnections that most affect Chile: the undetermined types (U), AW were associated with El Niño or the warm phase of the Pacific Decadal Oscillation (PDO), whereas the cyclonic northerly and cyclonic northeasterly types (CN and CNE) were associated with La Niña or cool phase of the PDO. The weather types associated with Antarctic Oscillation (AAO) in its positive phase are anticyclonic northerly and northeasterly and northerly advection types, while in its negative phase are cyclonic southwesterly and advection types.