Comparison between epiphyte assemblages of leaves and rhizomes of the seagrass Posidonia oceanica subjected to different levels of anthropogenic eutrophication

This paper aimed to compare epiphyte assemblages of leaves and rhizomes of Posidonia oceanica exposed to different levels of concentration of nutrients. The same design including a potentially impacted meadow and two reference meadows was used in each of two locations, characterized by the presence of a city or of suspended cages of a fish farm, respectively. This allowed to test for the consistency of responses of epiphytic assemblages to different sources of eutrophication. In both studies, results documented differences in patterns of composition and abundance of epiphytic assemblages on leaves between disturbed and reference meadows, while assemblages on rhizomes did not appear sensitive to this kind of disturbance. Moreover, in potentially impacted meadows, both assemblages showed different patterns of spatial variability compared to reference assemblages. Species composition and abundance of epiphyte assemblages seemed suitable for detecting moderate nutrient increases, even if adequate sampling designs are needed to separate patterns related to the large natural spatial variability of these systems from those related to changes in environmental conditions.     

Seismic characterization of an abandoned mine site

The near-surface rock structure that covers an abandoned marl mine nearby the village of Montevecchia (Italy) was investigated through a combination of seismic surveys. The methods selected for these investigations were refraction seismics and multichannel analysis of surface waves (MASW). A sort of transillumination experiment was also attempted. All the methods were successful and gave complementary information. Refraction seismics was used to characterize the upper low velocity layer and the second layer of the near-surface structure. The MASW method was necessary to assess the existence of a velocity inversion revealing the presence of a low velocity layer between the 2nd layer and a 4th high velocity layer covering the upper mine gallery. The transillumination experiment validated the presence of the 4th layer and gave an estimate of the average velocity that represents a lower boundary for the P-wave velocity within this layer. Both the refraction and transillumination data were analysed to derive average estimates of attenuation level and rock quality factor.     

Erupted cumulate fragments in rhyolites from Lipari (Aeolian Islands)

Over the last ~267 ky, the island of Lipari has erupted magmas ranging in compositions from basaltic andesites to rhyolites, with a notable compositional gap in the dacite field. Bulk geochemical and isotopic compositions of the volcanic succession, in conjunction with major and trace elemental compositions of minerals, indicate that the rhyolites were dominantly generated via crystal fractionation processes, with subordinate assimilation. Radiogenic (Sr, Nd, and Pb) and stable (O) isotopes independently suggest ≤30 % of crustal contamination with the majority of it occurring in mafic compositions, likely relatively deep in the system. Within the rhyolites, crystal-rich, K₂O-rich enclaves are common. In contrast to previous interpretations, we suggest that these enclaves represent partial melting, remobilization and eruption of cumulate fragments left-over from rhyolite melt extraction. Cumulate melting and remobilization is supported by the presence of (1) resorbed, low-temperature minerals (biotite and sanidine), providing the potassic signature to these clasts, (2) reacted Fo-rich olivine, marking the presence of mafic recharge, (3) An_38–21 plagioclase, filling the gap in feldspar composition between the andesites and the rhyolites and (4) strong enrichment in Sr and Ba in plagioclase and sanidine, suggesting crystallization from a locally enriched melt. Based on Sr-melt partitioning, the high-Sr plagioclase would require ~2300 ppm Sr in the melt, a value far in excess of Sr contents in Lipari and Vulcano magmas (50–1532 ppm) but consistent with melting of a feldspar-rich cumulate. Due to the presence of similar crystal-rich enclaves within the rhyolites from Vulcano, we propose that the eruption of remobilized cumulates associated with high-SiO₂ rhyolites may be a common process at the Aeolian volcanoes, as already attested for a variety of volcanic systems around the world.     

Geophysical Survey and Archaeological Data at Masseria Grasso (Benevento,Italy)

The use of geophysical methods in metrology is a significant tool within the wide research topic of landscape archaeology context. Since 2011, the Ancient Appia Landscapes Project aims to recognize dynamics, shapes and layout of the ancient settlement located along the Appia road east of Benevento, and cyclical elements and human activities that influenced the choice of landscapes. The integration of geophysical data with an archaeological infra-site analysis allowed us to investigate the area of Masseria Grasso, about 6 km from Benevento (Campania region, Italy). In this framework, an archaeogeophysical approach (Geomagnetic and Ground Penetrating Radar) was adopted for detecting anomalies potentially correlated with buried archaeological evidences. The geomagnetic results have given a wide knowledge of buried features in a large survey highlighting significant anomalies associated with the presence of buildings, roads and open spaces. These geophysical results permitted us to define the first archaeological excavations and, successively, a detailed Ground Penetrating Radar approach has been provided highlighting the rooms and paved spaces. The overlap between archaeological dataset and geophysical surveys has also allowed recognizing the path of the ancient Appia road near the city of Benevento and hypothesize the settlement organization of the investigated area, which has been identified with the ancient Nuceriola.     

Mantle and crustal processes in the magmatism of the Campania region: inferences from mineralogy, geochemistry, and Sr–Nd–O isotopes of young hybrid volcanics of the Ischia island (South Italy)

Ischia, one active volcano of the Phlegraean Volcanic District, prone to very high risk, is dominated by a caldera formed 55 ka BP, followed by resurgence of the collapsed area. Over the past 3 ka, the activity extruded evolved potassic magmas; only a few low-energy explosive events were fed by less evolved magmas. A geochemical and Sr–Nd–O isotope investigation has been performed on minerals and glass from products of three of such eruptions, Molara, Vateliero, and Cava Nocelle (<2.6 ka BP). Data document strong mineralogical, geochemical, and isotopic heterogeneities likely resulting from mingling/mixing processes among mafic and felsic magmas that already fed the Ischia volcanism in the past. Detailed study on the most mafic magma has permitted to investigate its origin. The mantle sector below Ischia underwent subduction processes that modified its pristine chemical, isotopic, and redox conditions by addition of ≤1 % of sediment fluids/melts. Similar processes occurred from Southeast to Northwest along the Apennine compressive margin, with addition of up to 2.5 % of sediment-derived material. This is shown by volcanics with poorly variable, typical δ¹⁸O mantle values, and ⁸⁷Sr/⁸⁶Sr progressively increasing toward typical continental crust values. Multiple partial melting of this modified mantle generated distinct primary magmas that occasionally assimilated continental crust, acquiring more ¹⁸O than ⁸⁷Sr. At Ischia, 7 % of Hercynian granodiorite assimilation produced isotopically distinct, K-basaltic to latitic magmas. A SW–NE regional tectonic structure gave these magmas coming from large depth the opportunity to mingle/mix with felsic magmas stagnating in shallower reservoirs, eventually triggering explosive eruptions.     

Sequence stratigraphy based on high-resolution seismic profiles in the late Pleistocene and Holocene deposits of the Venice area

The sequence-stratigraphic investigation by Very High-Resolution (VHR) seismic profiles allowed recognition of the detailed architecture of the late Pleistocene and Holocene succession of the Venice area. In this way deposits previously known by the analyses of scattered cores, mainly taken along the lagoon margin and the littoral strips, have been correlated at regional scale including the near offshore sector and the result has pointed out the lateral variability of the stratal architecture. Late Pleistocene deposits consist of an aggrading floodplain and fluvial channel fills accumulated during decreasing eustatic sea level, and they are coeval with offlapping forced regressive marine wedges in the Central Adriatic basin. The Holocene sequence is composed of three main seismic units separated by major stratal surfaces. Unit 1 (up to 9 m thick) is formed by channelized deposits separated by areas showing sub-horizontal and hummocky reflectors, and is bounded at the base by a surface that records prolonged conditions of subaerial exposure and at the top by a flatter surface resulting from erosion by marine processes. Deposits of Unit 1 are interpreted as estuarine and distributary channel fills, and back-barrier strata. Unit 2 is well distinguishable from Unit 1 only in the offshore area and at the barrier island bounding the Venice Lagoon, and is composed of a prograding marine wedge (up to 10 m thick) that interacts laterally with ebb tidal deltas. Unit 3 consists of a tidal channel complex and inlet deposits, which testify the evolution of the lagoon area. Tidal channels are entrenched in the lagoon mud flat (coeval with Units 1–2) and cut the Pleistocene–Holocene boundary in several places.Following current sequence-stratigraphic concepts, the Holocene sequence is composed of a paralic transgressive systems tract (TST) (Unit 1) overlying a sequence boundary (the Pleistocene–Holocene boundary) and overlain by a marine highstand systems tract (HST) (Unit 2) in seaward locations and by highstand lagoonal deposits landwards. TST and HST are separated by a downlap surface that is amalgamated with a wave ravinement surface in several places. Unit 3 is coeval with the upper part of Unit 2, and its development has been favoured by human interventions, which led to a transgression limited to the lagoon area.Local factors during the deposition, i.e. subsidence, sediment supply, physiography, and current/wave regimes, led to a significant lateral variability in the architecture of the Holocene sequence, as evidenced by the extreme thickness variation of the TST along both depositional strike and dip. The HST, instead, shows less pronounced strike variations in the stratal architecture. Also, present data clearly evidence that the human impact has a great relevance in influencing the late Holocene sedimentation.     

Silicate liquid immiscibility in impact melts

We have investigated silicate emulsions in impact glasses and impact melt rocks from the Wabar (Saudi Arabia), Kamil (Egypt), Barringer (USA), and Tenoumer (Mauritania) impact structures, and in experimentally generated impact glasses and laser-generated glasses (MEMIN research unit) by scanning electron microscopy, electron microprobe analysis, and transmission electron microscopy. Textural evidence of silicate liquid immiscibility includes droplets of one glass disseminated in a chemically distinct glassy matrix; sharp phase boundaries (menisci) between the two glasses; deformation and coalescence of droplets; and occurrence of secondary, nanometer-sized quench droplets in Si-rich glasses. The compositions of the conjugate immiscible liquids (Si-rich and Fe-rich) are consistent with phase separation in two-liquid fields in the general system Fe₂SiO₄–KAlSi₃O₈–SiO₂–CaO–MgO–TiO₂–P₂O₅. Major-element partition coefficients are well correlated with the degree of polymerization (NBO/T) of the Si-rich melt: Fe, Ca, Mg, and Ti are concentrated in the poorly polymerized, Fe-rich melt, whereas K, Na, and Si prefer the highly polymerized, Si-rich melt. Partitioning of Al is less pronounced and depends on bulk melt composition. Thus, major element partitioning between the conjugate liquids closely follows trends known from tholeiitic basalts, lunar basalts, and experimental analogs. The characteristics of impact melt inhomogeneity produced by melt unmixing in a miscibility gap are then compared to impact melt inhomogeneity caused by incomplete homogenization of different (miscible or immiscible) impact melts that result from shock melting of different target lithologies from the crater's melt zone, which do not fully homogenize and equilibrate due to rapid quenching. By taking previous reports on silicate emulsions in impact glasses into account, it follows that silicate impact melts of variable composition, cooling rate, and crystallization history might readily unmix during cooling, thereby rendering silicate liquid immiscibility a much more common process in the evolution of impact melts than previously recognized.