Modeling multiple wave systems in the eastern equatorial Pacific

Ocean Dynamics - While moderate wind and wave conditions prevail in the eastern equatorial Pacific, modeling waves in this area remains challenging due to the presence of multiple wave systems...     

Magma generation and crustal accretion as evidenced by supra-subduction ophiolites of the Albanide–Hellenide Subpelagonian zone

Abstract Ophiolites of the Mirdita–Subpelagonian zone form a nearly continuous belt in the Albanide–Hellenide orogen, including mid‐ocean ridge basalt (MORB) associations in the western Mirdita sector and supra‐subduction zone (SSZ) complexes, with prevalent island arc tholeiitic (IAT) and minor boninitic affinities in the eastern part of the belt (i.e. eastern Mirdita, Pindos, Vourinos). In addition, basalts with geochemical features intermediate between MORB and IAT (MORB/IAT) are found in the central Mirdita and in the Aspropotamos sequence (Pindos). These basalts alternate with pure MORB and are cut by boninitic dykes. The distinctive compositional characteristics of the mafic magmas parental to the different ophiolitic suites can be accounted for by partial melting of mantle sources progressively depleted by melt extractions. Partial melting processes (10–20%) of lherzolitic sources generated pure MORB, leaving clinopyroxene‐poor lherzolite as a residuum. Approximately 10% water‐assisted partial melting of this latter source, in an SSZ setting, may in turn generate basalts with MORB/IAT intermediate characteristics, whereas IAT basalts and boninites may have been derived from 10–20% and 30% partial melting, respectively, of the same source variably enriched by subduction‐derived fluids. In addition, boninites may also have been derived by comparatively lower degrees of hydrated partial melting of more refractory harzburgitic sources. A generalized petrologic model based on mass balance calculations between bulk rock and mineral compositions, indicate that most of the intrusives (from ultramafic cumulates to gabbronorites and plagiogranites), as well as sheeted dykes and volcanics (from basalts to rhyodacites) forming the bulk crustal section of the SSZ ophiolites, may be accounted for by shallow fractional crystallization from low‐Ti picritic parental magmas very similar in composition to IAT picrites from Pacific intraoceanic arcs. The most appropriate tectono‐magmatic model for the generation of the SSZ Tethyan ophiolites implies low velocity plate‐convergence of the intraoceanic subduction and generation of a nascent arc with IAT affinity and progressive slab roll‐back, mantle diapirism and extension from the arc axis to the forearc region, with generation of MORB/IAT intermediate basalts and boninitic magmas.     

Low multipath antennas for GNSS-based attitude determination systems applied to high-altitude platforms

High-altitude platforms (HAPs) are a flexible and attractive technology for providing innovative wireless services. These aerial platforms can be successfully employed for mobile or broadband communications and for disaster monitoring or response. However, one of the open issues is whether HAP stations can provide reliable services without temporal outages owing to stratospheric winds that can cause positional and attitude instabilities thus affecting the communication system operation. To counteract this issue, one possible solution is to use reconfigurable antennas whose pointing direction can be adjusted depending on the platform spatial orientation. However, this would require real-time three-axial attitude data. As a possible solution, this paper will review the potential of GNSS-based attitude determination systems with reference to HAP stations. In particular, it will be shown how the use of a particular class of low multipath and lightweight antennas can provide a high degree of accuracy without altering the avionic ballast.     

Two magmatic series with island arc affinities within the vourinos ophiolite

Within the Vourinos ophiolite evidence of two magmatic series has been preserved in cognate cumulates and in effusive and hypabyssal rocks, which constitute the earlier Krapa sequence and the younger Asprokambo sequence. The Asprokambo dyke basic magmas which are poor in incompatible elements and relatively Ni and Cr rich, bear some resemblance to very low Ti basalts (transitional to boninites) found in subduction related arcs or interarc basins. Krapa series magmas from sills, massive and pillow lavas are best equated with low-K tholeiites of island arc suites. Compositions of Al- and Ti- poor Cpx in lavas from both series are comparable to those in island arc basalts, the Asprokambo Cpx being richer in Ca and Cr than those from Krapa.The large volume of cumulates from the Krapa sequence displays the following crystallization order: Ol±Sp, Cpx, Pl±Opx, Mt. Periodic influx of fresh magma batches into the magma chamber occurred mainly during the formation of the lower cumulates (wehrlite, Ol-clinopyroxenite and melagabbro). The upper cumulates, gabbronorite and leucogabbronorite with minor Mt-bearing gabbronorite, crystallized in the upper levels of a magma chamber which became progressively smaller with time. In the Asprokambo sequence, Ol+Sp, Opx, Cpx, PI and Amph are the successively crystallizing phases. The ortho to heteradcumulates consist of websterite, Pl-websterite, gabbronorite, amphibole bearing leuconorite, diorite and granophyre. In cumulates, especially in the lower Krapa sequence, significant subsolidus reaction was probably induced by the persistence of high geothermal gradients linked to continuous magmatism. Petrological features indicate that the evolution of the Krapa series is more compatible with an intermediate fractional/equilibrium crystallization history in an initially open system, whereas nearly perfect fractional crystallization in closed system may have occurred in the small Asprokambo magma chambers. Chemical variations in the lavas of both series can be explained in terms of crystallization of the observed cumulates. Significantly, the Asprokambo intrusives have igneous Mg-hornblende and vanadium bearing, chromian, aluminous titaniferous magnetite, crystallization of which is responsible for the calcalkaline evolutionary trend of these rocks. Major and trace element modelling necessitates a two stage model for the petrogenesis of the Vourinos parental melts, involving high-degree remelting of previously depleted mantle sources favoured by the influx of subduction derived hydrous fluids. The primary magmas parental to the Krapa and Asprokambo series could have been derived respectively by 20 and 30% equilibrium partial fusion of variably depleted lherzolitic sources, leaving residua having a harzburgitic to dunitic composition.     

Deformation patterns of upper Quaternary strata and their relation to active tectonics,Po Basin,Italy

Despite increased application of subsurface datasets below the limits of seismic resolution, reconstructing near‐surface deformation of shallow key stratigraphic markers beneath modern alluvial and coastal plains through sediment core analysis has received little attention. Highly resolved stratigraphy of Upper Pleistocene to Holocene (Marine Isotope Stage 5e to Marine Isotope Stage 1) alluvial, deltaic and coastal depositional systems across the southern Po Plain, down to 150 m depth, provides an unambiguous documentation on the deformation of previously flat‐lying strata that goes back in time beyond the limits of morphological, historical and palaeoseismic records. Five prominent key horizons, accurately selected on the basis of their sedimentological characteristics and typified for their fossil content, were used as highly effective stratigraphic markers (M1 to M5) that can be tracked for tens of kilometres across the basin. A facies‐controlled approach tied to a robust chronology (102 radiocarbon dates) reveals considerable deformation of laterally extensive nearshore (M1), continental (M2 and M3) and lagoon (M4 and M5) marker beds originally deposited in a horizontal position (M1, M4 and M5). The areas where antiformal geometries are best observed are remarkably coincident with the axes of buried ramp anticlines, across which new seismic images reveal substantially warped stratal geometries of Lower Pleistocene strata. The striking spatial coincidence of fold crests with the epicentres of historic and instrumental seismicity suggests that deformation of marker beds M1 to M5 might reflect, in part at least, syntectonically generated relief and, thus, active tectonism. Precise identification and lateral tracing of chronologically constrained stratigraphic markers in the ¹⁴C time window through combined sedimentological and palaeoecological data may delineate late Quaternary subsurface stratigraphic architecture at an unprecedented level of detail, outlining cryptic stratal geometries at the sub‐seismic scale. This approach is highly reproducible in tectonically active Quaternary depositional systems and can help to assess patterns of active deformation in the subsurface of modern alluvial and coastal plains worldwide.     

Multistage evolution of the European lithospheric mantle: new evidence from Sardinian peridotite xenoliths

Peridotite xenoliths entrained in Plio-Pleistocene alkali basalts from Sardinia represent fragments of the uppermost lithospheric mantle, and are characterised by an anhydrous four-phase mineral assemblage. They range in bulk rock composition from fertile spinel-lherzolites to residual spinel-harzburgites. The Sr-Nd isotope and trace element composition of clinopyroxene mineral separates varies between LREE-depleted samples with ⁸⁷Sr/⁸⁶Sr as low as 0.70262 and ¹⁴³Nd/¹⁴⁴Nd up to 0.51323 and LREE-enriched samples with ⁸⁷Sr/⁸⁶Sr up to 0.70461 and ¹⁴³Nd/¹⁴⁴Nd down to 0.51252. The available data suggest that all the studied peridotite samples suffered variable degrees of partial melting during Pre-Mesozoic times (based on Nd model ages relative to CHUR and DMM). The overprinted enrichment is related to a subsequent metasomatism, induced by fluids rising through the lithosphere that preferentially percolated the originally most depleted domains. Despite the occurrence of orogenic volcanism in the area, preferential enrichment in elements typically associated with slab derived fluids/melts (K, Rb, Sr, Th) relative to LREE has not been detected, and metasomatism seems to be more likely related to the infiltration of highly alkaline basic melts characterised by an EM-like Sr-Nd isotopic composition. Similar ⁸⁷Sr/⁸⁶Sr-¹⁴³Nd/¹⁴⁴Nd compositions, characterised by an EM signature, are observed in anorogenic mafic lavas and peridotite xenoliths from widespread localities within the "European" plate, whereas they have not previously been recorded in peridotite xenoliths and associated alkaline mafic lavas from the stable "African" lithospheric domain.     

Mechanisms linking active rock glaciers and impounded surface water formation in high‐mountain areas

Rock glaciers are slowly flowing mixtures of debris and ice occurring in mountains. They can represent a reservoir of water, and melting ice inside them can affect surface water hydrochemistry. Investigating the interactions between rock glaciers and water bodies is therefore necessary to better understand these mechanisms. With this goal, we elucidate the hydrology and structural setting of a rock glacier–marginal pond system, providing new insights into the mechanisms linking active rock glaciers and impounded surface waters. This was achieved through the integration of waterborne geophysical techniques (ground penetrating radar, electrical resistivity tomography and self‐potentials) and heat tracing. Results of these surveys showed that rock glacier advance has progressively filled the valley depression where the pond is located, creating a dam that could have modified the level of impounded water. A sub‐surface hydrological window connecting the rock glacier to the pond was also detected, where an inflow of cold and mineralised underground waters from the rock glacier was observed. Here, greater water contribution from the rock glacier occurred following intense precipitation events during the ice‐free season, with concomitant increasing electrical conductivity values. The outflowing dynamic of the pond is dominated by a sub‐surface seepage where a minor fault zone in bedrock was found, characterised by altered and highly‐fractured rocks. The applied approach is evaluated here as a suitable technique for investigating logistically‐complex hydrological settings which could be possibly transferred to wider scales of investigation. Copyright © 2017 John Wiley & Sons, Ltd.     

On the interaction between ocean surface waves and seamounts

Of the many topographic features, more specifically seamounts, that are ubiquitous in the ocean floor, we focus our attention on those with relatively shallow summits that can interact with wind-generated surface waves. Among these, especially relatively long waves crossing the oceans (swells) and stormy seas are able to affect the water column up to a considerable depth and therefore interact with these deep-sea features. We quantify this interaction through numerical experiments using a numerical wave model (SWAN), in which a simply shaped seamount is exposed to waves of different length. The results show a strong interaction that leads to significant changes in the wave field, creating wake zones and regions of large wave amplification. This is then exemplified in a practical case where we analyze the interaction of more realistic sea conditions with a very shallow rock in the Yellow Sea. Potentially important for navigation and erosion processes, mutatis mutandis, these results are also indicative of possible interactions with emerged islands and sand banks in shelf seas.     

Soil–pile–structure interaction: experimental outcomes from shaking table tests

An effective way to study the complex seismic soil‐structure interaction phenomena is to investigate the response of physical scaled models in 1‐g or n‐g laboratory devices. The outcomes of an extensive experimental campaign carried out on scaled models by means of the shaking table of the Bristol Laboratory for Advanced Dynamics Engineering, University of Bristol, UK, are discussed in the present paper. The experimental model comprises an oscillator connected to a single or a group of piles embedded in a bi‐layer deposit. Different pile head conditions, that is free head and fixed head, several dynamic properties of the structure, including different masses at the top of the single degree of freedom system, excited by various input motions, e.g. white noise, sinedwells and natural earthquake strong motions recorded in Italy, have been tested. In the present work, the modal dynamic response of the soil–pile–structure system is assessed in terms of period elongation and system damping ratio. Furthermore, the effects of oscillator mass and pile head conditions on soil–pile response have been highlighted, when the harmonic input motions are considered. Copyright © 2015 John Wiley & Sons, Ltd.