Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data

The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.     

Study of the variability of the Delta Scuti stars

Photoelectric observations of the suspected Delta-Scuti star HR 5492 are given. The present data do not show any light variation greater than 0.01 mag. In spite of the very small light variations, the data analysis shows the presence of two periodicities, which are statistically significant. While the longest period (1. _. ^d 296) cannot be justified with the present data, the shorter one (0. _. ^d 044) is in excellent agreement with the hypothesis of an F4V star that is radially pulsating in the fundamental mode, even if this star is well outside the cold border of the instability strip.     

Amphipod-supported food web: Themisto gaudichaudii, a key food resource for fishes in the southern Patagonian Shelf

The trophic role of the hyperiid amphipod Themisto gaudichaudii in the southern Patagonian shelf food web was assessed from the analysis of stomach contents of the local fish assemblage. A total of 461 trawl samples were collected during seven seasonal cruises. A total of 17 out of 38 fish species were found to ingest T. gaudichaudii. This amphipod was a main prey item in five of these species, showing high values of alimentary index: Seriolella porosa (99.9%), Macruronus magellanicus (68.8%), Micromesistius australis (59.1%), Patagonotothen ramsayi (48.6%), and Merluccius hubbsi (10.9%). The contribution of T. gaudichaudii, in weight, to their summer diet was 60%, on average. This contribution was minimal in winter and maximal in summer. Fisheries studies have indicated that these five species, mainly M. magellanicus, account for almost 85% of the fish biomass in the area. Although the remaining 15% did not feed heavily on T. gaudichaudii, they are known to prey on the main hyperiid predators. Our study shows that T. gaudichaudii contributes greatly, both directly and indirectly, to supporting the fish community. We thus proposed that T. gaudichaudii plays a key role as a “wasp-waist” species in the sub-Antarctic region, similar to that of krill in Antarctic waters, channeling the energy flow and enabling a short and efficient food chain.     

A wave model for the Great Barrier Reef

A new wind wave generation model, WAMGBR, is presented that has been adapted from WAM especially for use in the complex geometry of the Great Barrier Reef. A technique (reef parameterization) has been presented that incorporates sub-grid scale dissipation caused by coral reefs. Three other improvements to WAM have been proposed. An explicit/implicit finite difference scheme has been implemented that allows for more efficient modelling (longer time steps) while maintaining diffusive characteristics that are at least as good as those of WAM. An offset in discrete angles creates more uniform diffusive characteristics. And, a transformed spherical coordinate system allows for more efficient grid sizes and smaller grid dependent refraction. Comparisons between modelling techniques and between model and measured data show that WAMGBR produces very good results in the difficult challenge of modelling both non-cyclonic and tropical cyclone waves in the geographically complex environment of the Great Barrier Reef.     

Five years of thermal intra-urban monitoring in Florence (Italy) and application of climatological indices

This paper presents 5?years of detailed intra-urban thermal measurements carried out in Florence (Italy) by a network of 25 air temperature stations. Daily, hourly, and degree-day indices were applied to hourly data to evaluate the difference within the complex urban environment of Florence. Stations were grouped in four clusters with similar thermal regimes in each season. Our results evidence a mean difference of almost 2°C between the hottest and the coolest cluster in all seasons. Furthermore, the coolest cluster had on average more than ten frost days in winter and the hottest cluster more than 12 summer days in summer. The intra-urban difference of tropical nights was even more evident, with values of 42 versus 10?days between the hottest and the coolest cluster during the summer period. The results of this study contribute to quantify the thermal intra-urban differences in the city of Florence, suggesting important applications in plant phenology, aerobiology, human health, urban planning, and biometeorology.     

Photoelectric activity of the shell staro And: New observations and discussion

Photoelectric observations of the shell staro And, obtained in 1979, are presented. The star shows variations of some hundredth of magnitudes during a few hours. The trend to retake the values of the luminosity and colour indices prior to the reduction happened between JD 42,714-27, seems to continue. We also give a qualitative model which explains satisfactorily the main features observed after the 1975 shell episode.     

On Flare-CME Characteristics from Sun to Earth Combining Remote-Sensing Image Data with <Emphasis Type="Italic">In Situ</Emphasis> Measurements Supported by Modeling

We analyze the well-observed flare and coronal mass ejection (CME) from 1 October 2011 (SOL2011-10-01T09:18) covering the complete chain of effects – from Sun to Earth – to better understand the dynamic evolution of the CME and its embedded magnetic field. We study in detail the solar surface and atmosphere associated with the flare and CME using the Solar Dynamics Observatory (SDO) and ground-based instruments. We also track the CME signature off-limb with combined extreme ultraviolet (EUV) and white-light data from the Solar Terrestrial Relations Observatory (STEREO). By applying the graduated cylindrical shell (GCS) reconstruction method and total mass to stereoscopic STEREO-SOHO (Solar and Heliospheric Observatory) coronagraph data, we track the temporal and spatial evolution of the CME in the interplanetary space and derive its geometry and 3D mass. We combine the GCS and Lundquist model results to derive the axial flux and helicity of the magnetic cloud (MC) from in situ measurements from Wind. This is compared to nonlinear force-free (NLFF) model results, as well as to the reconnected magnetic flux derived from the flare ribbons (flare reconnection flux) and the magnetic flux encompassed by the associated dimming (dimming flux). We find that magnetic reconnection processes were already ongoing before the start of the impulsive flare phase, adding magnetic flux to the flux rope before its final eruption. The dimming flux increases by more than 25% after the end of the flare, indicating that magnetic flux is still added to the flux rope after eruption. Hence, the derived flare reconnection flux is most probably a lower limit for estimating the magnetic flux within the flux rope. We find that the magnetic helicity and axial magnetic flux are lower in the interplanetary space by ～?50% and 75%, respectively, possibly indicating an erosion process. A CME mass increase of 10% is observed over a range of \({\sim}\,4\,\mbox{--}\,20~\mathrm{R}_{\odot }\). The temporal evolution of the CME-associated core-dimming regions supports the scenario that fast outflows might supply additional mass to the rear part of the CME.     

Study of the variability of the Delta Scuti-stars

Photoelectric observations of the Delta Scuti star KW 207 (HD 73576) are given. In spite of the low variations, the analysis of the light curves shows at least two sighificant periodicities, which seem to be related to non-radial pulsations.A third frequency, corresponding to the radial fundamental mode, is probably bame out by our data.     

Carbonate-hosted siliceous crust type mineralization of Carnic Alps (Italy-Austria)

A carbonate-hosted stratabound siliceous crust type (SCT) mineralization (base metal sulphides, barite, fluorite) occurs over large areas of Carnic Alps and Karawanken in the Eastern Alps. It concerns a pervasively silicified lithological unit, up to some tens of metres thick, which caps the unconformity landscapes developed on epicontinental Devonian–Dinantian carbonates. The SCT mineralization is directly overlaid by different transgressive siliciclastic sediments, which range from Lower Carboniferous to Lower Permian. The presence of fragments of the SCT mineralization in the transgressive siliciclastic sediment bounds its whole lithological evolution within a short stratigraphic interval of Lower Carboniferous age. Selected features of the regional and lithostratigraphic setting are discussed. The chemical characterisation is based on the statistical evaluation of compositional data of 581 selected samples. Three significant groups of elements have been distinguished: (1) the hydrological and metasomatically active elements (Si, Ba, F), which show a strong negative correlation amongst themselves and characterise the silica-saturated aqueous solutions; (2) the terrigenous elements (Al₂O₃, K₂O, Fe_tot, TiO₂, B, Be, Ce, La, Nb, V, Y, Zr), which suggest a continental margin environment for silica deposition; (3) the sulphide metals (Cu, Pb, Zn, Ni, Sb, As, Hg, Cd), which define the metalliferous signature of the SCT mineralization.Some consistent, but still debatable genetic aspects of the SCT mineralization are as follow: (1) silica may be supplied by illitization of clay-rich basinal sediments during their diagenesis. δ¹⁸O of microcrystalline quartz ranges from +18.5‰ and +24.6‰ and is very similar to δ¹⁸O of authigenic quartz deriving from diagenetic processes of illitization of clay-rich basinal sequences. (2) The diagenetic evolution of these sediments may trigger off the movement of silica-rich marine pore waters. δ³⁴S of barite ranges from +15.5‰ to +19.3‰ with an average of +17.7‰ and are in good agreement with δ³⁴S of sulphate in ocean waters of Upper Devonian–Lower Carboniferous age. (3) A convective hydrological system, connected with sinsedimentary transtensive tectonics, active in the Carnic Alps since the Frasnian, may be the transport mechanism of aqueous solutions. (4) A weak drop in pH in the dominant carbonate environment represents the conditions for silica precipitation.SCT mineralization, showing persistent, independent and distinct characters, occurs over large areas also in other sites of the Alpine belt and outside Italy and Austria. Therefore, it points to important markers for some sedimentary sequences as well as to a worldwide significant cyclic metallogenic event. It represents a new ore deposit-type within the carbonate-hosted mineralization.