Long-term comparison of macrobenthos within the soft bottoms of the Bay of Banyuls-sur-mer (northwestern Mediterranean Sea)

The macrofauna present at seven of the stations within the Bay of Banyuls-sur-mer (northwestern Mediterranean) initially sampled by Guille during the late 1960s was reassessed in 1994, using the same gear and techniques as those used during the reference study. Results showed an increase both in the number of species and of individuals (all species pooled) per unit of surface area at nearly all stations. This trend was not significant for total biomass. The most important changes were linked to the increase of the polychaete Ditrupa arietina (both within the Spisula subtruncata and the Nephtys hombergii community) and the decrease of the polychaetes Scoloplos armiger and Notomastus latericeus within the Scoloplos armiger community. The possible causes underlying these changes are discussed. The most probable cause is considered to be a slight modification of sediment composition (decrease of fine material in the sediment) within the Spisula subtruncata, the Nephtys hombergii and the Scoloplos armiger communities. Temporal changes in (1) Rhone river input, (2) small coastal river inputs, and (3) frequency of easterly storms may all have contributed to such a decrease.     

A mixed finite element method for Hele-Shaw cell equations

A new numerical method to solve the system of equations describing two phase flow in a Hele-Shaw cell is presented. It combines a mixed finite element method, the method of subtraction of the singularity and a front tracking grid in a single computational strategy. This choice of discretization techniques is well motivated by the difficulties present in the system of equations and the physics of the problem. The new method was tested against analytical solutions and also by solving the Saffman–Taylor viscous fingering problem for finite and infinite mobility ratios. In both cases convergence under mesh refinement is achieved for the fingers developed from an initial sinusoidal interface. Finger splitting is observed for low values of the surface tension and high mobility ratio. Different explanations, based in our results, are provided for this phenomenon. This revised version was published online in July 2006 with corrections to the Cover Date.     

Sample treatment with focused ultrasound and bath sonication as a powerful tool for the evaluation of cadmium pollution in estuarine waters

A new sample treatment was developed for the determination of dissolved cadmium in Tagus estuarine waters, based on focused ultrasound in conjunction with small volumes in the extraction steps for Cd pre-concentration. Cadmium was first pre-concentrated using a classical approach (APDC as the complexing agent and MIBK as the organic phase) and then back-extracted into HNO₃ with the aid of focused ultrasound, which reduced the acid concentration by more than one order of magnitude (from 4 to 0.1 mol L^− 3). This sample treatment was accomplished in less than 5 min, using low sample volume (20 mL), and low-volume, low-concentration reagents. The pre-concentration factor used in this work was 25, but different sample/organic volume ratios may be used in order to increase that value. The limit of detection and the limit of quantification in Tagus water samples were 0.03 nmol L^− 1 and 0.1 nmol L^− 3, respectively. Recoveries from spiked Tagus water were higher than 90%. The procedure was validated using the reference estuarine water NRC-SLEW-3. In the solubilization of Cd particulate, bath ultrasonication was used in conjunction with HNO₃ + HCl, followed by H₂O₂, which took about 2 instead of the usual 12 h (cooling included) when high-pressure microwave digestion is used.     

Regeneration of sand waves after dredging

Sand waves are large bed waves on the seabed, being a few metres high and lying hundreds of metres apart. In some cases, these sand waves occur in navigation channels. If these sand waves reduce the water depth to an unacceptable level and hinder navigation, they need to be dredged. It has been observed in the Bisanseto Channel in Japan that the sand waves tend to regain their shape after dredging. In this paper, we address modelling of this regeneration of sand waves, aiming to predict this process. For this purpose, we combine a very simple, yet effective, amplitude-evolution model based on the Landau equation, with measurements in the Bisanseto Channel. The model parameters are tuned to the measured data using a genetic algorithm, a stochastic optimization routine. The results are good. The tuned model accurately reproduces the measured growth of the sand waves. The differences between the measured weave heights and the model results are smaller than the measurement noise. Furthermore, the resulting parameters are surprisingly consistent, given the large variations in the sediment characteristics, the water depth and the flow field. This approach was tested on its predictive capacity using a synthetic test case. The model was tuned based on constructed predredging data and the amplitude evolution as measured for over 2 years. After tuning, the predictions were accurate for about 10 years. Thus, it is shown that the approach could be a useful tool in the optimization of dredging strategies in case of dredging of sand waves.     

Deforestation and leaching of nitrogen as nitrates into underground water in intertropical zones: The example of Côte d'lvoire

High nitrate contents (up to 200 mgl) have been observed in wells drilled into fractured aquifers lying beneath layers of weathered and decayed rock in the humid tropics where annual rainfall is over 1000 mm and where there is no notable pollution. The source of the nitrates is linked mainly with localized deforestation by man.     

Reconstruction of Holocene paleohydrological and sedimentological characteristics of Umm Ar-Rimam basin (northern Kuwait)

The paleohydrological and sedimentological characteristics of a playa lake in northern Kuwait (Arabian Gulf) are reconstructed using sedimentological, geochemical, and isotopic techniques. The sequence consists of up to 8 cycles of S-poor, alluvial sediments capped by a thin organic soil interbedded with gravity-fall calcrete sediments. The succession is locally derived from mainly Quaternary sediments and is regressive with upsection filling of the subsiding basin by cycles of sheetwash flow in response to climatic change. There is no natural, open-water lake water as indicated by low total organic carbon (TOC) data, but the presence of incised calcrete yardangs suggests that more extensive open-water conditions were operative in the past. Stable isotope (δ¹⁸O‰ and δ¹³C‰) values of the authigenic carbonates indicate the following three distinct processes: evaporation, meteoric fluid infiltration, and rapid per-descensum flow (rapid downward movement of water and playa sediment through pipes) through a porous, clastic sequence. Because evaporites are scarce, other factors besides evaporation action control chemical and isotopic compositions of the per-decensum lake fluids. Consequently, the isotopic composition cannot be interpreted exclusively as an indicator of salinity or evaporation ratio. The degassing of CO₂ during groundwater discharge may explain the enriched carbon isotope values for the authigenic carbonates precipitated in the sediments. Hydrologically closed lake water bodies tend to show low negative carbonate oxygen and carbon isotopic signatures. Isotopically negative δ¹³C values imply a strong input of soil-zone carbon to the groundwater of the top 60 cm of the sediment. Lakes that are hydrologically closed and evaporate or equilibrate with atmospheric CO₂ will tend to have low negative δ¹⁸O and δ¹³C values in the carbonates as reported by Talbot (Chem Geol: Isotope Geosci Sect 80(4):261–279, 1990). Biologically active lakes will tend toward lower δ¹³C of dissolved carbon due to the photosynthetic effects of ¹²C withdrawal as reported by Dunagan and Driese (J Sed Res 69:772–783, 1999). Increased biological activity during sedimentation may account for low carbon isotope values where plants were abundant, but in shrinkage-dominated systems (those of clay-rich soil subjecting to wet-dry conditions), carbon isotopes will be largely inherited from the calcretic limestones in the land extending landward of the coast and not influenced by coastal processes (known as hinterland), such as Umm Ar-Rimam depression. This basin does not fit the classic shallow playa-type basins of the Arabian Peninsula but rather the recharge playas of the southwestern USA.     

Pyroxenite xenoliths from an alkali trachybasalt in the Glen Innes area,northeastern New South Wales

Pyroxenite xenoliths are relatively common in an alkali trachybasalt in the Glen Innes area in northeastern New South Wales where they coexist with peridotite xenoliths, probably lherzolitic. The pyroxenites vary widely in modal composition. Several pyroxenite xenoliths are characterised by megacrystals of subcalcic clinopyroxene and enstatite, the former comprising a unique group of high pressure pyroxenes in which exsolution of orthopyroxene has proceeded on a megascopic scale. Garnet is absent from all mineral assemblages. Mineralogical and experimental data suggest that the subcalcic clinopyroxene and orthopyroxene megacrystals equilibrated initially at temperatures and pressures of the order of 1350–1450° C and 10–23 kb respectively. The most common xenoliths, namely diopsideorthopyroxene assemblages in which there is evidence of subsolidus annealing, equilibrated at comparable pressures but a significantly lower temperatures (ca. 1000° C). It is suggested that the pyroxenites and associated peridotite xenoliths are samples of essentially unmodified layered upper mantle.     

Morphology and structure of the Galapagos Rise

Geophysical data collected on three U.S. Naval Oceanographic Office cruises to the Galapagos Rise are presented. These data allow definition of the morphology and structure of the Galapagos Rise.A postulated “hot spot” beneath the Galapagos platform is suggested as the cause of: (1) decreased seismicity along the spreading center for a 400 km E—W distance from the islands; (2) distinctive petro-chemistry of tholeiites from the islands and adjacent oceanic crust generated by the Galapagos Rise; (3) high-amplitude magnetic anomalies in a 1,000 km E—W band including and just north of the Galapagos platform; and (4) morphologic shape and the regionally elevated sea floor of the Galapagos Rise as it approaches the insular platform.     

Effects of large organic material on channel form and fluvial processes

Stream channel development in forested areas is profoundly influenced by large organic debris (logs, limbs and rootwads greater than 10 cm in diameter) in the channels. In low gradient meandering streams large organic debris enters the channel through bank erosion, mass wasting, blowdown, and collapse of trees due to ice loading. In small streams large organic debris may locally influence channel morphology and sediment transport processes because the stream may not have the competency to redistribute the debris. In larger streams flowing water may move large organic debris, concentrating it into distinct accumulations (debris jams). Organic debris may greatly affect channel form and process by: increasing or decreasing stability of stream banks; influencing development of midchannel bars and short braided reaches; and facilitating, with other favourable circumstances, development of meander cutoffs. In steep gradient mountain streams organic debris may enter the channel by all the processes mentioned for low gradient streams. In addition, considerable debris may also enter the channel by way of debris avalanches or debris torrents. In small to intermediate size mountain streams with steep valley walls and little or no floodplain or flat valley floor, the effects of large organic debris on the fluvial processes and channel form may be very significant. Debris jams may locally accelerate or retard channel bed and bank erosion and/or deposition; create sites for significant sediment storage; and produce a stepped channel profile, herein referred to as ‘organic stepping’, which provides for variable channel morphology and flow conditions. The effect of live or dead trees anchored by rootwads into the stream bank may not only greatly retard bank erosion but also influence channel width and the development of small scour holes along the channel beneath tree roots. Once trees fall into the stream, their influence on the channel form and process may be quite different than when they were defending the banks, and, depending on the size of the debris, size of the stream, and many other factors, their effects range from insignificant to very important.     

The Mafic and Ultramafic Lavas of the Belingwe Greenstone Belt, Rhodesia

The Belingwe Greenstone Belt (2.8 x 10⁹ yrs old) contains a7 km succession of mafic and ultramafic lavas and high-levelintrusions which overlie a thin sedimentary formation, itselfunconformable on a granitic basement. The lavas range in compositionfrom andesites (4 per cent MgO) to peridotitic komatiites (32per cent MgO). The mineralogy and textures of the most magnesianlavas demonstrate that they were extruded in a completely liquidstate. If the source mantle had an MgO content around 40 percent, then partial melts in the range 35 per cent to 55 percent would be required to produce the most magnesian liquidsobserved. Chemical constraints on the petrogenesis of the ultramafic lavasallow estimates of source mantle composition. In particular,if the source had an MgO content around 40 per cent, then theoverall source composition would be similar to that of garnetIherzolite nodules in kimberlites. The calculated REE contentsof the source are close to chondritic. If all the ultramaficlavas were derived from the same source then the variation inliquid composition may have been controlled by orthopyroxeneas well as olivine during partial melting at depth. The evolutionof the less magnesian komatiites, basalts, and andesites canbe explained by lower degrees of partial melting of a commonsource, and by high-level fractionation of parent liquids similarto those extruded as ultramafic lavas. Physical constraints on the origin of the lavas imply derivationfrom a depth of 150 km or more, at temperatures of 1600–2000°C.