意大利埃特纳火山的三维速度结构与地震活动性

本文的研究工作,得到了埃特纳火山下面的一组新的三维速度模型。作者们用１９８０年以来地方性地震在永久和临时地震台网在４个或更多台记录到的１２４９次地震的Ｐ和Ｓ波,被选来作走时反演。选择了几种判别标志与参数化办法以显示其类似的基本特征。表明在火山的东南象限在浅层,有Ｐ波的高速分怖,它同布格重力高异常有密切关系。在该区存在低的Ｖｐ／Ｖｓ比值;沿着中央火山管道,分布有高速Ｐ波和高的Ｖｐ／Ｖｓ比值;建议该处存在有稠密的侵入的岩浆体,延伸到２０千米左右的深度,该区附近有低速的Ｐ波速度。对震源的重新定位也显示出向外倾斜的易碎区,与中央火山管道延伸出一段Ｐ波高速异常区,位于中央火山口的附近。沿着中央火山口附近,有Ｐ波的低速区,它同次生的火山锥的分布有关,与部份熔融的深部岩浆库有联系。     

Decentralization, forests and livelihoods: Theory and narrative

This paper discusses the theory of decentralized forest management, the associated narrative and the underlying hypotheses. That discussion informs the assessment of whether decentralization can lead to forest conservation. The paper argues that the ideal model of democratic decentralization described in the literature is unlikely to be implemented given the governance constraints present in many tropical forest countries. Even if that model could be implemented, it is shown that decentralization cannot be expected to necessarily lead to forest conservation. The policies required to complement the current decentralization model are discussed, including financial incentives and monitoring and evaluation mechanisms.     

The Intra-Pontide ophiolites in Northern Turkey revisited:From birth to death of a Neotethyan oceanic domain

The Anatolian peninsula is a key location to study the central portion of the Neotethys Ocean(s)and to understand how its western and eastern branches were connected.One of the lesser known branches of the Mesozoic ocean(s)is preserved in the northern ophiolite suture zone exposed in Turkey,namely,the Intra-Pontide suture zone.It is located between the Sakarya terrane and the Eurasian margin(i.e.,Istanbul-Zonguldak terrane)and consists of several metamorphic and non-metamorphic units containing ophiolites produced in supra-subduction settings from the Late Triassic to the Early Cretaceous.Ophiolites preserved in the metamorphic units recorded pervasive deformations and peak metamorphic conditions ranging from blueschist to eclogite facies.In the nonmetamorphic units,the complete oceanic crust sequence is preserved in tectonic units or as olistoliths in sedimentary melanges.Geochemical,structural,metamorphic and geochronological investigations performed on ophiolite-bearing units allowed the formulation of a new geodynamic model of the entire"life"of the IntraPontide oceanic basin(s).The reconstruction starts with the opening of the Intra-Pontide oceanic basins during the Late Triassic between the Sakarya and Istanbul-Zonguldak continental microplates and ends with its closure caused by two different subductions events that occurred during the upper Early Jurassic and Middle Jurassic.The continental collision between the Sakarya continental microplate and the Eurasian margin developed from the upper Early Cretaceous to the Palaeocene.The presented reconstruction is an alternative model to explain the complex and articulate geodynamic evolution that characterizes the southern margin of Eurasia during the Mesozoic era.     

Post-Last Glacial Maximum evolution of a “fjord-type” lake based on high-resolution seismic data: the Lago Roca/Acigami (southern Tierra del Fuego,Argentina/Chile)

Lago Roca/Acigami is a “fjord-type” lake located in the southernmost part of South America, in the proximity of the Beagle Channel. A high-resolution seismic survey was carried out to analyse the seismic stratigraphy of the lake and to shed some light on the post-Last Glacial Maximum history of the area. Six seismic units were recognised, and their nature and depositional context were interpreted using seismic stratigraphy and acoustic facies analysis. A buried large ridge was identified within the glacial unit (SU1), interpreted as a frontal moraine that indicates a stabilisation phase. After retreat of the glacier from the basin, the trough was flooded by meltwater and a lake developed (SU2). The seismic facies, from bottom to top, depict a transition from ice-contact (SU2; SU3) to ice-distal proglacial conditions (SU4). A thick draping unit (SU5) marks a marine transgressive event and the instauration of a fjord environment in the basin. The marine transgression was a rapid event preceded by a fall in the lake level that caused an erosional unconformity. During the fjord phase the sedimentation remained controlled by meltwater discharge. Sea level fall, and subsequent disconnection from the Beagle Channel was accompanied by a progradation of the glaciofluvial deltaic sediments and the occurrence of several mass-wasting deposits (SU6). © 2019 John Wiley & Sons, Ltd.     

Characterization of salt-water intrusion in the lower Esino Valley, Italy using a three-dimensional numerical model

A seawater-intrusion study was conducted at an oil-refinery site located on the coast in the lower Esino Valley, Italy. A steady-state density-dependent flow model was used in order to understand the position of the freshwater/salt-water interface, as influenced by the hydrogeologic structure and the presence of industrial activities and a river. Collected data and model results showed that in a large part of the area, the salt-water interface is steep and can penetrate only a few meters inland. On the other hand, close to the river mouth, seawater represents the main saline source for the aquifer. The river, in connection with the sea, can enhance seawater encroachment into the coastal aquifer; a long-term survey of river level and chloride concentrations in groundwater is recommended to further improve the physical model and to obtain a better calibration. At the refinery site, two “secondary” sources of saline water were identified and were demonstrated to have had a great influence on the presence of brackish waters in the unconfined aquifer: leakage from the fire-extinguishing system (network of pipes containing seawater) and rough sea events. This confirmed that groundwater contamination by chloride can result from means other than seawater intrusion.     

High-temperature vesuvianite: crystal chemistry and surface considerations

A multi-methodical approach has been applied for characterizing the bulk and surface crystal chemical features of a high-temperature vesuvianite crystal from skarns of Mount Somma-Vesuvius Volcano (Naples, Italy). Vesuvianite belongs to the space group P4/nnc with unit cell parameters a = 15.633(1) Å, c = 11.834(1) Å and chemical formula (Ca_18.858 Na_0.028 Ba_0.004 K_0.006 Sr_0.005 □_0.098)_19.000 (Al_8.813 Ti_0.037 Mg_2.954 Mn_0.008 Fe_0.114²⁺ Fe_1.375³⁺ Cr_0.008 B_0.202)_13.511 Si_18.000(O_0.261 F_0.940 OH_7.799)_9.000. Structure refinement, which converges at R = 0.0328, demonstrates a strong positional disorder down the fourfold axes, indicating that the Y1 site is split into two positions (Y1A and Y1B) alternatively occupied. However, because of X4 proximity to Y1B and Y1A, X4 cannot be occupied if Y1B or Y1A are. Overall Y1 occupancy (Y1A + Y1B) reaches approximately 0.5, as common in vesuvianite and occupancy of Y1B site is extremely limited. Moreover, T1 position, limitedly occupied, accommodates the excess of cations generally related to Y position. A small quantity (0.202 apfu) of boron is sited at the T2 site that, like T1, is poorly occupied. The determination of the amount of each element on the (100) vesuvianite surface, obtained through X-ray photoelectron spectroscopy high-resolution spectra in the region of the Si_2p, Al_2p, Mg_1s, and Ca_2p core levels, evidences that a greater amount of aluminum and a smaller amount of calcium characterize the surface with respect to the bulk. Although both of these features require further investigation, we may consider the Al increase can be related to preferential orientation of Al-rich sites on the (100) plane. Furthermore, the surface structure of vesuvianite suggests that Al, Ca, and Mg cations maintain coordination features at the surface similar to the bulk. Silica, however, while presenting fourfold coordination, shows also a [1]-fold small coordinated component at binding energy 99.85 eV, due to broken Si–O bonds at the surface. The presence of eight- and nine-coordinated Ca cations is suggested by a large XPS feature resulting from the merging of Ca_2p3/2 and Ca_2p1/2 peaks at 348.45 and 352.05 eV, respectively.     

Observations and box model analysis of radon-222 in the atmospheric surface layer at L’Aquila,Italy: March 2009 case study

Two years of radon-222 observations collected at L’Aquila (Italy) in the atmospheric surface layer during 2004–2006 were analyzed in correlation with meteorological data and other atmospheric tracers. A box model was developed to better understand the mechanisms of diurnal and seasonal variability of the tracer and to indirectly assess the magnitude of the monthly averaged radon soil flux in the L’Aquila measurement site. The model was successfully validated with measurements, with a 0.8 average correlation coefficient between hourly values for the whole period of radon observations. Measurements taken during March 2009 were analyzed to find possible signs of perturbation due to the ongoing seismic activity that would have reached its peak on the 6 April 2009 destructive earthquake. Contrary to the professed (and unpublished) dramatic increases of radon activity unofficially announced to the inhabitants at that time, the study presented here shows that no radon activity increase took place in L’Aquila with respect to a previous ‘seismically unperturbed’ year (same month with similar meteorological conditions), but that an average 30 % decrease was experienced. This conclusion is reached from a direct comparison of observed data and also as a result of the previously validated radon box model constrained by actual meteorological data, from which an indirect estimate of a 17 % reduction of the radon soil flux is obtained.     

Eocene simple shear and plio-quaternary pure-shear folding in the Central-Eastern Algerian Atlas

Tertiary folds of the central and eastern part of the Algerian Atlas were studied in order to assess their kinematics and regimes of deformation. Folds developed following two main phases of deformation during the Eocene and the Pliocene. The NE-SW trending Eocene folds show a clockwise rotation of fold axis with depth, noncylindrical geometry and a right-stepping en echelon configuration. Early secondary structures inside each fold are also rotated clockwise with respect to the younger folds. These data are in agreement with progressive ‘simple shear’ deformation. Pliocene folds strike E-W and display a cylindrical geometry. Associated Plio-Quaternary brittle structures show no rotational path. These observations are compatible with ‘pure shear’ style of deformation. These results, in combination with focal mechanism solutions, have important implications for the understanding of the kinematic evolution of the western segment of the African-European plate boundary. For Algeria they imply that transcurrent motion during the Paleogene was followed by coaxial shortening with a NNW direction during Neogene-Quaternary times. Comparison with published data for Morocco and Tunisia suggests that this transcurrent regime developed from west to east continuing from the Middle Jurassic through to the Miocene.     

The influence of various seawater components on the buffer capacity for CO2

A series of experiments was performed using artificial seawater samples of increasing complexity, in order to identify, qualitatively and quantitatively, the contribution of main seawater components on the buffer capacity for CO₂.The results show that magnesium plays the most important role in the uptake, enhancing the capacity of the carbonate system alone by more than 100%.