A detailed analysis of two seismic sequences in Abruzzo, Central Apennines, Italy

A three-component digital seismic network has been installed along central Apennines since the end of 1991. Two seismic sequences having main shocks of magnitudes 3.9 and 3.7 were recorded in August 1992 and June 1994, respectively. A detailed analysis of these sequences, including multiplet relocation, fault-plane solutions and source parameter estimation, is performed in the present paper. A correlation analysis allowed us to recognize a number of correlated events in the two sequences which were used for relative locations using a master event technique. This analysis allowed to obtain a better alignment of epicentral data along two almost orthogonal directions, following an Apenninic and an anti-Apenninic trend. For the two sequences, fault-plane solutions were evaluated by using a first arrival technique, resulting in mechanisms with predominant normal faulting for the 1992 and 1994 swarms. S-wave polarization analysis allowed to check the stability of the previous solutions and to reduce their range of uncertainty. The same technique was also applied to derive the composite fault-plane solutions from the aftershocks, resulting in solutions which are in good agreement with those derived from the main shocks of both sequences. Source parameters were then derived from the three-component records of 28 well-recorded events with seismic moment in the range 8.5 × 10¹⁰–1.0 × 10¹⁴ Nm. Stress drops ranged in the interval 0.3–52.3 bar and source radii were of the order of 100 m. Their scaling relations are in good agreement with other results derived from the analysis of other Italian earthquakes that occurred in regions of predominantly normal faulting tectonics (Apennines and Calabrian arc).     

Geological constraints for earthquake faulting studies in the Colfiorito area (central Italy)

On September 26, 1997, at 00.33 h(GMT), a Mw 5.7 earthquake occurred in the axial zone of theUmbria-Marche Apennines of central Italy, in the Colfiorito basin area. At09.40 h (GMT), a M_w 6.0 earthquake again struck the area withinthe Colfiorito basin, a major intramontane basin filled with Quaternarycontinental deposits. The two main shocks, and the associated aftershockswere within a roughly NNW-SSE trending zone of largest damage (Imax10), in which ground deformation has been observed. Along this trend,Cello et al. (1997a) had mapped a few capable faults, showingtranstensional to pure extensional kinematics. Field inspection of themapped faults, carried out after the main shocks, revealed that some ofthem were locally reactivated (for lengths of several hundreds metres andsurface slip in the range of 2–8 cm) during the September 26, 1997earthquakes.     

Weak gravitational lensing by voids

We consider the prospects for detecting weak gravitational lensing by underdensities (voids) in the large-scale matter distribution. We derive the basic expressions for magnification and distortion by spherical voids. Clustering of the background sources and cosmic variance are the main factors that limit in principle the detection of lensing by voids. We conclude that only voids with radii larger than ∼100  h ⁻¹ Mpc have lensing signal-to-noise ratio larger than unity.     

Metal fluxes to the sediments of the northern Venice Lagoon

Eighteen short cores were analyzed for major and trace metals (Al, Fe, Ca, Mg, Mn, Si, K, Ti, Pb, Zn, Cu, Ni, Cr), ²¹⁰Pb, ¹³⁷Cs, and other sediment characteristics, so as to describe the chronology of pollution and calculate metal concentration factors and fluxes. Substantial evidence was found that trace metal profiles are influenced by anthropogenic sources and by changes in sediment composition. Only Zn presents concentrations (up to 13.1 μmol g⁻) and concentration factors (1.3 to 13.2) that can be attributed to heavy contamination. Pb, Cu and Ni, in this order, are less significant. The areal distribution of concentrations and inventories reflects the importance of direct sources, in particular the industrial area of Porto Marghera and the Dese river. The inventories of excess metals, above pre-industrial levels, were determined for each core and the three different parts of the study area, the amounts of Zn accumulated in sediments are 11.0 Mmol, 5.1 Mmol and 0.37 Mmol in the Campalto, S. Erasmo, and Palude di Cona areas, respectively. Ruxes were also calculated and compared with those suggested for the atmospheric delivery by Cochran et al. [(1995)b. Atmospheric fluxes of heavy metal contaminants to the Venice Lagoon, Rapp. Comm. Int. Mer Médit., 34, 136.], the atmospheric contribution is predominant or significant in many cases, especially at sites far from the major local inputs. Concentrations and fluxes show a significant increase in the anthropogenic metal supply starting from the second decade of this century, with maximum inputs in the period between the (1930)s and the (1970)s. At some stations a decrease in heavy metal contamination of surficial sediments was found and this could be ascribed to a reduced input of pollutants in recent years.     

Al-Cu-Fe alloys in the solar system: Going inside a Khatyrka-like micrometeorite (KT01) from the Nubian Desert,Sudan

A recently described micrometeorite from the Nubian desert (Sudan) contains an exotic Al-Cu-Fe assemblage closely resembling that observed in the Khatyrka chondrite (Suttle et al., 2019; Science Reports 9:12426). We here extend previous investigations of the geochemical, mineralogical, and petrographic characteristics of the Sudan spherule by measuring oxygen isotope ratios in the silicate components and by nano-scale transmission electron microscopy study of a focused ion beam foil that samples the contact between Al-Cu alloys and silicates. O-isotope work indicates an affinity to either OC or CR chondrites, while ruling out a CO or CM precursor. When combined with petrographic evidence we conclude that a CR chondrite parentage is the most likely origin for this micrometeorite. SEM and TEM studies reveal that the Al-Cu alloys mainly consist of Al metal, stolperite (CuAl), and khatyrkite (CuAl₂) together with inclusions in stolperite of a new nanometric, still unknown Al-Cu phase with a likely nominal Cu₃Al₂ stoichiometry. At the interface between the alloy assemblage and the surrounding silicate, there is a thin layer (200 nm) of almost pure MgAl₂O₄ spinel along with well-defined and almost perfectly spherical metallic droplets, predominantly iron in composition. The study yields additional evidence that Al-Cu alloys, the likely precursors to quasicrystals in Khatyrka, occur naturally. Moreover, it implies the existence of multiple pathways leading to the association in reduced form of these two elements, one highly lithophile and the other strongly chalcophile.     

Medium‐term fluvial island evolution in a disturbed gravel‐bed river (Piave River,Northeastern Italian Alps)

River islands are defined as discrete areas of woodland vegetation surrounded by either water‐filled channels or exposed gravel. They exhibit some stability and are not submerged during bank‐full flows. The aim of the study is to analyze the dynamics of established, building, and pioneer islands in a 30‐km‐long reach of the gravel‐bed Piave River, which has suffered from intense and multiple human impacts. Plan‐form changes of river features since 1960 were analyzed using aerial photographs, and a LiDAR was used to derive the maximum, minimum and mean elevation of island surfaces, and maximum and mean height of their vegetation. The results suggest that established islands lie at a higher elevation than building and pioneer islands, and have a thicker layer of fine sediments deposited on their surface after big floods. After the exceptional flood in 1966 (RI > 200 years) there was a moderate increase in island numbers and extension, followed by a further increase from 1991, due to a succession of flood events in 1993 and 2002 with RI > 10 years, as well as a change in the human management relating to the control of gravel‐mining activities. The narrowing trend (1960–1999) of the morphological plan form certainly enhanced the chance of islands becoming established and this explains the reduction of the active channel, the increase in established islands and reduction of pioneer islands.     

Bedload hysteresis in a glacier‐fed mountain river

Sediment transport during flood events often reveals hysteretic patterns because flow discharge can peak before (counterclockwise hysteresis) or after (clockwise hysteresis) the peak of bedload. Hysteresis in sediment transport has been used in the literature to infer the degree of sediment availability. Counterclockwise and clockwise hysteresis have been in fact interpreted as limited and unlimited sediment supply conditions, respectively. Hysteresis has been mainly explored for the case of suspended sediment transport, but it was rarely reported for bedload transport in mountain streams. This work focuses on the temporal variability of bedload transport in an alpine catchment (Saldur basin, 18.6 km², Italian Alps) where bedload transport was monitored by means of an acoustic pipe sensor which detects the acoustic vibrations induced by particles hitting a 0.5m‐long steel pipe. Runoff dynamics are dominated by snowmelt in late spring/early summer, mostly by glacier melt in late summer/early autumn, and by a combination of the snow and glacier melt in mid‐summer. The results indicate that hysteretic patterns during daily discharge fluctuations are predominantly clockwise during the snowmelt period, likely due to the ready availability of unpacked sediments within the channel or through bank erosion in the lower part of the basin. On the contrary, counterclockwise hysteresis tend to be more frequent during late glacier melting period, possibly due to the time lag needed for sediment provided by the glacial and peri‐glacial area to be transported to the monitoring section. However, intense rainfall events occurring during the glacier melt period generated predominantly clockwise hysteresis, thus indicating the activation of different sediment sources. These results indicate that runoff generation processes play a crucial role on sediment supply and temporal availability in mountain streams. Copyright © 2014 John Wiley & Sons, Ltd.     

意大利埃特纳火山的三维速度结构与地震活动性

本文的研究工作,得到了埃特纳火山下面的一组新的三维速度模型。作者们用１９８０年以来地方性地震在永久和临时地震台网在４个或更多台记录到的１２４９次地震的Ｐ和Ｓ波,被选来作走时反演。选择了几种判别标志与参数化办法以显示其类似的基本特征。表明在火山的东南象限在浅层,有Ｐ波的高速分怖,它同布格重力高异常有密切关系。在该区存在低的Ｖｐ／Ｖｓ比值;沿着中央火山管道,分布有高速Ｐ波和高的Ｖｐ／Ｖｓ比值;建议该处存在有稠密的侵入的岩浆体,延伸到２０千米左右的深度,该区附近有低速的Ｐ波速度。对震源的重新定位也显示出向外倾斜的易碎区,与中央火山管道延伸出一段Ｐ波高速异常区,位于中央火山口的附近。沿着中央火山口附近,有Ｐ波的低速区,它同次生的火山锥的分布有关,与部份熔融的深部岩浆库有联系。