The Kuroshio Extension and its recirculation gyres

This paper reports on the strength and structure of the Kuroshio Extension and its recirculation gyres. In the time average, quasi-permanent recirculation gyres are found to the north and south of the Kuroshio Extension jet. The characteristics of these recirculations gyres are determined from the combined observations from the Kuroshio Extension System Study (KESS) field program (June 2004–June 2006) and include current meters, pressure and current recording inverted echo sounders, and subsurface floats. The position and strength of the recirculation gyres simulated by a high-resolution numerical model are found to be consistent with the observations. The circulation pattern that is revealed is of a complex system of multiple recirculation gyres that are embedded in the crests and troughs of the quasi-permanent meanders of the Kuroshio Extension. At the location of the KESS array, the Kuroshio Extension jet and its recirculation gyres transport of about 114 Sv. This represents a 2.7-fold increase in the transport of the current compared to the Kuroshio's transport at Cape Ashizuri before it separates from the coast and flows eastward into the open ocean. This enhancement in the current's transport comes from the development of the flanking recirculation gyres. Estimates from an array of inverted echo sounders and a high-resolution ocean general circulation model are of similar magnitude.     

Radar observations of asteroid 25143 Itokawa (1998 SF36)

Abstract— We observed 25143 Itokawa, the target of Japan's Hayabusa (MUSES‐C) sample‐return mission, during its 2001 close approach at Arecibo on twelve dates during March 18‐April 9 and at Goldstone on nine dates during March 20‐April 2. We obtained delay‐Doppler images with range resolutions of 100 ns (15 m) at Arecibo and 125 ns (19 m) at Goldstone. Itokawa's average circular polarization ratio at 13 cm, 0.26 ± 0.04, is comparable to that of Eros, so its cm‐to‐m surface roughness probably is comparable to that on Eros. Itokawa's radar reflectivity and polarization properties indicate a near‐surface bulk density within 20% of 2.5 g cm^?3. We present a preliminary estimate of Itokawa's shape, reconstructed from images with rather limited rotation‐phase coverage, using the method of Hudson (1993) and assuming the lightcurve‐derived spin period (12.132 hr) and pole direction (ecliptic long., lat. = 355°, ?84°) of Kaasalainen et al. (2003). The model can be described as a slightly asymmetrical, slightly flattened ellipsoid with extents along its principal axes of 548 times 312 times 276 m ± 10%. Itokawa's topography is very subdued compared to that of other asteroids for which spacecraft images or radar reconstructions are available. Similarly, gravitational slopes on our Itokawa model average only 9° and everywhere are less than 27°. The radar‐refined orbit allows accurate identification of Itokawa's close planetary approaches through 2170. If radar ranging planned for Itokawa's 2004 apparition succeeds, then tracking of Hayabusa during its 2005 rendezvous should reveal Yarkovsky perturbation of the asteroid's orbit.     

A Road Map for the Generation of a Near-Infrared Guide Star Catalog for Thirty Meter Telescope Observations

The near-infrared instruments in the upcoming Thirty Meter Telescope (TMT) will be assisted by a multi conjugate Adaptive Optics (AO) system. For the efficient operation of the AO system, during observations, a near-infrared guide star catalog which goes as faint as 22 mag in J_Vega band is essential and such a catalog does not exist. A methodology, based on stellar atmospheric models, to compute the expected near-infrared magnitudes of stellar sources from their optical magnitudes is developed. The method is applied and validated in JHKs bands for a magnitude range of J_Vega 16–22 mag. The methodology is also applied and validated using the reference catalog of PAN STARRS. We verified that the properties of the final PAN STARRS optical catalog will satisfy the requirements of TMT IRGSC and will be one of the potential sources for the generation of the final catalog. In a broader context, this methodology is applicable for the generation of a guide star catalog for any existing/upcoming near-infrared telescopes.     

Soil-gas radon anomalies in three study areas of Central-Northern Calabria (Southern Italy)

Soil-gas radon concentrations and exhalation rates have generally been observed to be anomalously high along active faults in many parts of the world. The soil-gas method is based on the principle that faults and fractures in rocks are highly permeable pathways along which gases can migrate upward from deep crust and mantle to soil cover, retaining their source signatures. The present study summarizes the influence of fault zones on anomalous radon concentrations in soil by integrated geophysical and geo-structural analyses in three study areas of Central-Northern Calabria (Southern Italy). Soil-gas radon surveys have been carried out by means of an alpha scintillation counting system, at 12,509 locations between 2002 and 2004. A geostatistical approach has been used to estimate the spatial distribution of soil radon concentrations. Relations among soil-gas distribution and geo-structural features have been evaluated by ordinary multi-Gaussian kriging. Highest soil radon concentrations (ca. 90 kBq m^?3) have been measured in the Rossanese sector. In the three study areas, no appreciable differences can be noticed among lithotypes, with the highest concentration values (ca. 89 kBq m^?3) measured in alluvial deposit and in clay. Measurements of soil-gas radon reveal anomalies clearly connected to the tectonic structures. Increased signals are linearly distributed along regional WNW–ESE trending shear zones, with main pathways of concentration also recognizable along the E–W fault system in the Rossanese sector, the N–S fault system in the Crati Graben and the Catanzaro Trough, and the NE–SW fault system in the Catanzaro Trough. The distribution of epicentres of historical earthquakes occurred between 1184 and 2001 confirms the recent activity of the same fault systems. Soil-gas radon concentrations generally increase, as expected, with decreasing distance to the faults.     

Condensation water in heritage touristic caves: Isotopic and hydrochemical data and a new approach for its quantification through image analysis

Condensation water is a major factor in the conservation of heritage caves. It can cause dissolution of the rock substrate (and the pigments of rock art drawn on it) or covering thereof with mineral components, depending on the chemical saturation degree of the condensation water. In show caves, visitors act as a source of CO₂ and thus modify the microclimate, favouring negative processes that affect the conservation of the caves. In spite of their interest, studies of the chemical composition of this type of water are scarce and not very detailed. In this work we present research on the condensation water in the Nerja Cave, one of the main heritage and tourist caves in Europe. The joint analysis of isotopic, hydrochemical, mineralogical and microbiological data and the use of image analysis have allowed us to advance in the knowledge of this risk factor for the conservation of heritage caves, and to demonstrate the usefulness of image analysis to quantify the scope of the possible corrosion condensation process that the condensation water could be producing on the bedrock, speleothem and rock art. To our knowledge, this application of image analysis (relative to the condensation water in caves) is the first one of this type that has been documented.     

Publications received by the Editor

Abstract

Temperature profiles (temperature as function of depth) can be used to derive vertical flow velocities or recharge rates. In many cases, solutions to the one-dimensional (1-D) heat transport equation are used, considering steady-state boundary conditions. Factors which can influence the derivation of the mean vertical flow velocity are studied here. Therefore, an explicit finite-difference approximation to the 1-D heat transport equation coupled with an inverse scheme was used to interpret temperature profiles. Measurement error (larger than 0.05°C) can result in important deviation of the derived mean flow velocity. Variation of vertical flow velocity as a function of time leads to asymmetric temperature envelopes. Yearly variation in vertical flow velocities, or temperature variations of the recharge water, also results in asymmetric temperature envelopes. Interpretation of these asymmetric envelopes leads to important differences between derived and actual mean vertical flow velocities.

Citation Vandenbohede, A. &; Lebbe, L. (2010) Vandenbohede, A. and Lebbe, L. 2010. Parameter estimation based on vertical heat transport in the surficial zone. Hydrogeol. J., 18 , 931–943,doi:10.1007/s10040-009–0557–5 [Google Scholar] Recharge assessment by means of vertical temperature profiles: analysis of possible influences. Hydrol. Sci. J. 55(5), 792–804.     

Yields of suspended sediment and dissolved solids from the Andean basins of Ecuador

Abstract

Water discharge and suspended and dissolved sediment data from three rivers (Napo, Pastaza and Santiago) in the Ecuadorian Amazon basin and a river in the Pacific basin (Esmeraldas) over a 9-year period, are presented. This data set allows us to present: (a) the chemical weathering rates; (b) the erosion rates, calculated from the suspended sediment from the Andean basin; (c) the spatio-temporal variability of the two regions; and (d) the relationship between this variability and the precipitation, topography, lithology and seismic activity of the area. The dissolved solids load from the Esmeraldas basin was 2 × 10⁶ t year^-1, whereas for the Napo, Pastaza and Santiago basins, it was 4, 2 and 3 × 10⁶ t year^-1, respectively. For stations in the Andean piedmont of Ecuador, the relationship between surface sediment and the total sediment concentration was found to be close to one. This is due to minimal stratification of the suspended sediment in the vertical profile, which is attributed to turbulence and high vertical water speeds. However, during the dry season, when the water speed decreases, sediment stratification appears, but this effect can be neglected in the sediment flux calculations due to low concentration rates. The suspended sediment load in the Pacific basin was 6 × 10⁶ t year^-1, and the total for the three Amazon basins was 47 × 10⁶ t year^-1. The difference between these contributions of the suspended sediment load is likely due to the tectonic uplift and the seismic and volcanic dynamics that occur on the Amazon side.

Editor Z.W. Kundzewicz

Citation Armijos, E., Laraque, A., Barba, S., Bourrel, L., Ceron, C., Lagane, C., Magat, P., Moquet, J.-S., Pombosa, R., Sondag, F., Vauchel, P., Vera, A., and Guyot, J.L., 2013. Yields of suspended sediment and dissolved solids from the Andean basins of Ecuador. Hydrological Sciences Journal, 58 (7), 1478–1494.     

Long-term increase in diffuse groundwater recharge following expansion of rainfed cultivation in the Sahel,West Africa

Rapid population growth in sub-Saharan West Africa and related cropland expansion were shown in some places to have increased focused recharge through ponds, raising the water table. To estimate changes in diffuse recharge, the water content and matric potential were monitored during 2009 and 2010, and modeling was performed using the Hydrus-1D code for two field sites in southwest Niger: (1) fallow land and (2) rainfed millet cropland. Monitoring results of the upper 10 m showed increased water content and matric potential to greater depth under rainfed cropland (>2.5 m) than under fallow land (≤1.0 m). Model simulations indicate that conversion from fallow land to rainfed cropland (1) increases vadose-zone water storage and (2) should increase drainage flux (～25 mm year^?1) at 10-m depth after a 30–60 year lag. Therefore, observed regional increases in groundwater storage may increasingly result from diffuse recharge, which could compensate, at least in part, groundwater withdrawal due to observed expansion in irrigated surfaces; and hence, contribute to mitigate food crises in the Sahel.     

Manganese-reducing Pseudomonas fluorescens-group bacteria control arsenic mobility in gold mining-contaminated groundwater

Previous studies show the importance of iron- and arsenate-reducing bacteria in mobilizing arsenic in groundwater. Here the authors present experimental evidence of arsenic mobilization in connection with bacterially mediated manganese reduction in groundwater affected by mining activities. Manganese-reducing Pseudomonas species were enriched, isolated and identified by 16S rRNA gene phylogeny from groundwater containing high co-dissolved arsenic (as As^III) and manganese. Enrichment cultures dissolved synthetic birnessite and hausmannite efficiently, but Mn reduction by isolates was reduced at the upper range of environmental levels of dissolved As^III. Results suggest either a self-limiting release of arsenic coupled to bacterial manganese reduction, in the absence of other electron donors like sulfide, or increased arsenic resistance conferred to Mn-reducing bacteria in consortia.     

Generation of a Near Infra-Red Guide Star Catalog for Thirty-Meter Telescope Observations

The requirements for the production of a near Infra-Red Guide Star Catalog (IRGSC) for Thirty Meter Telescope (TMT) observations are identified and presented. A methodology to compute the expected J band magnitude of stellar sources from their optical (g, r, i) magnitudes is developed. The computed and observed J magnitudes of sources in three test fields are compared and the methodology developed is found to be satisfactory for the magnitude range, J_Vega = 16–22 mag. From this analysis, we found that for the production of final TMT IRGSC (with a limiting magnitude of J_Vega = 22 mag), we need g, r, i bands optical data which go up to i _AB ~ 23 mag. Fine tuning of the methodology developed, such as using Spectral Energy Distribution (SED) template fitting for optimal classification of stars in the fainter end, incorporating spectral libraries in the model, to reduce the scatter, and modification of the existing colour–temperature relation to increase the source density are planned for the subsequent phase of this work.