Fluid migration at the basement/sediment interface along the margin of the Southeast basin (France): implications for Pb–Zn ore formation

This study investigates the isotopic composition (C, O, S and Sr) of carbonates, sulphates and sulphide cements in the rock matrix and fracture fillings in geological formations of the Southeast basin of France, using core samples collected during the Deep Geology of France programme (GPF Ardèche theme). The Southeast basin belongs to the Alpine Tethyan margin. It is one of the thickest sedimentary basins in Europe, reaching upwards of 9 km in certain locations. The main fluid transfer from the basin is related to the large Pb–Zn Mississippi Valley-type district along the southern margin of the Massif Central block. A synthesis of the tectonic, mineralogical and petrographic investigations on the GPF boreholes shows that a major fluid circulation event occurred across the Alpine margin of Tethys during the Early Jurassic (Hettangian–Bathonian). It produced a general cementation of the rock porosity through precipitation of dolomite, sulphate and barite. Fracture fillings yield isotopic signatures distinct from the matrix cements. Matrix cements have particular characteristics, i.e. δ³⁴S and δ¹³C that agree with a marine origin. The δ³⁴S values of Permo-Carboniferous to Triassic sulphides from fracture cements are interpreted as resulting from the thermo-chemical reduction of sulphates. Fracture sulphates in the same geological formations yield δ³⁴S values that define a relatively homogeneous end-member, whose composition is similar to sulphates in the Largentière Pb–Zn ore deposit. The source of S is attributed to the Permo-Carboniferous succession. The borehole fracture fillings are attributed to a major fluid circulation stage compatible with the Early Jurassic stage identified from the geological investigation of the boreholes. The formation of the Largentière deposit is considered as resulting from the mixing of this Early Jurassic fluid with continental hydrothermal fluids circulating in a basement horst, along its margin with the sedimentary basin. Other Pb–Zn deposits may also be related to fluid migration along the basement/sedimentary cover interface in the eastern and western parts of the Massif Central. This regional fluid circulation event may represent a geodynamic marker of the Jurassic extensional phase.     

Propriétés fractales de la fragmentation et processus stochastiques de fracturation : approche géométrique 3D à l'aide du modèle ObsifracFractal properties of fragmentation and stochastic fracturing processes: geometrical 3D approach by OBSIFRAC model

A numerical rock fragmentation model was elaborated, producing a 3D puzzle of convex polyhedra, geometrically described in a database. In the first scenario, a constant proportion of blocks are fragmented at each step of the process and leads to fractal distribution. In the second scenario, division affects one random block at each stage of the process, and produces a Weibull volume distribution law. Imposing a minimal distance between the fractures, the third scenario reveals a power law. The inhibition of new fractures in the neighbourhood of existing discontinuities could be responsible for fractal properties in rock mass fragmentation. To cite this article: L. Empereur-Mot, T. Villemin, C. R. Geoscience 334 (2002) 127–133.     

Phénomènes karstiques fossiles et actuels au sein des formations métamorphiques silico-alumineuses de la nappe pan-africaine de Yaoundé (Sud-Cameroun)Fossil and present-time karstic phenomena in silico-aluminous metamorphic formations of the Pan-African nappe of Yaoundé (South-Cameroon)

Numerous karstic features have been recognised in the non-carbonaceous micaschists and gneisses of the Yaoundé Pan-African nappe, south of Cameroon. It is shown that their formation was controlled by the structural features of the rocks. The wells and the pipes in the bedrock outcrops point out a current karstification process, resulting from the plagioclase dissolution by the acid rain waters. Hill wall alveoli and caves, of pre-Miocene age, are exhumed features that were done by dissolution in the aquiferous underground. To cite this article: J.-P. Vicat et al., C. R. Geoscience 334 (2002) 545–550.     

Mineralogical sources of the buffer capacity in a granite catchment determined by strontium isotopes

The role of different minerals in base cation release and thus the increase of buffering capacity of groundwater against acid deposition is controversially discussed in the literature. The ⁸⁷Sr/⁸⁶Sr ratios and base cation concentration were investigated in whole rock leachates, mineral separates, precipitation, soil solution, groundwater and stream water samples in the Lehstenbach catchment (Germany) to identify the weathering sequence of the granite bedrock. Three different approaches were followed in parallel. It was assumed that the contribution of different minerals to base cation supply of the groundwater with increasing weathering intensity would be observed by investigating (1) unweathered rock leachates, deep groundwater and shallow groundwater, (2) groundwater samples from new groundwater wells, reflecting the initial weathering of the drilled bedrock, and groundwater from wells that were drilled in 1988, (3) stream water during baseflow, dominated by deep groundwater, and stream water during high flow, being predominantly shallow groundwater. Whereas the first approach yielded consistent patterns, there was some evidence that groundwater from the new wells initially reflected contamination by the filter gravel rather than cation release in an initial stage of weathering. Time series samples of stream water and groundwater solute concentrations and isotope ratios turned out to reflect varying fractions of soil water and precipitation water at baseflow and high flow conditions rather than varying contributions of different minerals that prevail at different stages of granite weathering.     

Quantitative prediction of discrete element models on complex loading paths

The ability of discrete element models to describe quantitatively (and not only qualitatively) the constitutive behaviour of a dense sand is assessed in this paper. Two kinds of 3D discrete models are considered. Both consider spheres as elementary particles. Nevertheless, the first model implements a contact law with rolling resistance whereas the second takes into account clumps made of two spheres. The discrete models are calibrated and validated from mechanical tests performed on a dense Hostun sand with a true triaxial apparatus. The calibration is carried out from axisymmetric drained compression tests, while the validation is discussed from monotonic and cyclic stress proportional loading paths and from a circular stress path in the deviatoric stress plane. The quality of the predictions of the discrete models are evaluated by comparison with the predictions given with advanced phenomenological constitutive relations, mainly an incrementally non-linear relation. Predictions given by the discrete models are remarkable, particularly when it is put in perspective with respect to the very few number of mechanical tests required for their calibration. However, these results and conclusions were reached in enabling conditions, and some limitations of such discrete models should be kept in mind.     

A Compilation of Silicon,Rare Earth Element and Twenty‐One other Trace Element Concentrations in the Natural River Water Reference Material SLRS‐5 (NRC‐CNRC)

The natural river water certified reference material SLRS‐5 (NRC‐CNRC) was routinely analysed in this study for major and trace elements by ten French laboratories. Most of the measurements were made using ICP‐MS. Because no certified values are assigned by NRC‐CNRC for silicon and 35 trace element concentrations (rare earth elements, Ag, B, Bi, Cs, Ga, Ge, Li, Nb, P, Rb, Rh, Re, S, Sc, Sn, Th, Ti, Tl, W, Y and Zr), or for isotopic ratios, we provide a compilation of the concentrations and related uncertainties obtained by the participating laboratories. Strontium isotopic ratios are also given.     

Cracking risk of partially saturated porous media—Part I: Microporoelasticity model

Drying of deformable porous media results in their shrinkage, and it may cause cracking provided that shrinkage deformations are hindered by kinematic constraints. This is the motivation to develop a thermodynamics‐based microporoelasticity model for the assessment of cracking risk in partially saturated porous geomaterials. The study refers to 3D representative volume elements of porous media, including a two‐scale double‐porosity material with a pore network comprising (at the mesoscale) 3D mesocracks in the form of oblate spheroids, and (at the microscale) spherical micropores of different sizes. Surface tensions prevailing in all interfaces between solid, liquid, and gaseous matters are taken into account. To establish a thermodynamics‐based crack propagation criterion for a two‐scale double‐porosity material, the potential energy of the solid is derived, accounting—in particular—for mesocrack geometry changes (main original contribution) and for effective micropore pressures, which depend (due to surface tensions) on the pore radius. Differentiating the potential energy with respect to crack density parameter yields the thermodynamical driving force for crack propagation, which is shown to be governed by an effective macrostrain. It is found that drying‐related stresses in partially saturated mesocracks reduce the cracking risk. The drying‐related effective underpressures in spherical micropores, in turn, result in a tensile eigenstress of the matrix in which the mesocracks are embedded. This way, micropores increase the mesocracking risk. Model application to the assessment of cracking risk during drying of argillite is the topic of the companion paper (Part II). Copyright © 2009 John Wiley & Sons, Ltd.     

Difference in petrophysical properties between foliated and dilatant fault rocks in deeply buried clastics: The case of the Grès d'Annot Formation,SW French Alps

This study describes normal fault zones formed in foreland arkosic turbidites (the Grès d'Annot Formation, SW French Alps) under deep diagenesis conditions (~200 °C) and highlights the occurrence of two markedly different fault‐rock types: (1) the foliated fault rocks of the Moutière‐Restefond area; and (2) the dilatant fault rocks of the Estrop area. The deformation of (1) is dominated by intra‐ and transgranular fracturing, pressure solution of quartz and feldspar grains and syn‐kinematic phyllosilicate precipitation resulting from feldspar alteration. The combination of these mechanisms results in a strongly anisotropic strain with intense shortening normal to the foliation (pressure solution) and extension parallel to the foliation (quartz‐ and calcite‐sealed extension veins). This deformation implies local mass transfer that may be achieved without (or with limited) volume change. The deformation of (2) is expressed as dilatant quartz‐sealed veins and breccia textures in which the main mechanisms are transgranular fracturing and quartz precipitation. Type (2) implies fault volume increase, isotropy of deformation and mass transfer at distances larger than in type (1). This study discusses the origins of (1) and (2) and shows that the permeability of (1) is anisotropic, with higher values than the host rocks parallel to the Y main deformation axis (i.e. perpendicular to the slip vector), whereas the permeability of (2) is isotropic and equivalent to that of the host rocks.     

Isolation and water-level fluctuations of Lake Kachishayoot, Northern Québec, Canada

This study combines different methods, including grain size, macrofossil, and pollen analyses, to reconstruct paleogeographical and paleoclimatological conditions for periods before, during, and after the isolation of a small lake (Lake Kachishayoot) in northern Québec. After the retreat of the Laurentide Ice Sheet around 8000 ¹⁴C yr B.P., the area was submerged by the Tyrrell Sea. The transition from marine to lacustrine environment occurred about 5400 yr B.P. Two major periods of water-level fluctuations were inferred from organic and mineral sediments: a high water level that occurred after 3200 yr B.P. and a low water level that started before 2200 yr B.P. Our chronological data for the first period are consistent with those from nearby Lac des Pluviers and from other lakes in east central Canada and in the northeastern United States. During the low-water-level period, however, there is no evidence for minor fluctuations, whereas other lakes in northern Québec and east-central Canada underwent several brief lowerings. Long-term changes in atmospheric circulation caused by changing global boundary conditions likely explained long-term water-level fluctuations of Lake Kachishayoot.