FluBiDi – a model to estimate flood based on runoff: validation using extreme and natural basin conditions

FluBiDi is a two-dimensional model created to simulate real events that can take days and months, as well as short events (minutes or hours) and inclusive laboratory tests. To verify the robustness of FluBiDi, it was tested using a previous study with both designed and real digital elevation models. The results highlight good agreement between the models (i.e. Mike Flood, SOBEK, ISIS 2D, and others) tested and FluBiDi (around 90% for a specific instant and 95% for the complete time simulation). In the simulated hydrographs, the discharge peak value, time to peak, and water level results were accurate, reproducing them with an error of less than 5%. The velocity differences observed in a couple of tests in FluBiDi were associated with very short periods of time (seconds). However, FluBiDi is highly accurate for simulating floods under real topographical conditions with differences of around 2 cm when water depth is around 150 cm. The average water depth and velocities are precise, and the model describes with high accuracy the pattern and extent of floods. FluBiDi has the capability to be adjusted to different types of events and only requires limited input data.     

Morphosedimentary features and recent depositional architectural model of the Cantabrian continental margin

Multibeam bathymetry, high (sleeve airguns) and very high resolution (parametric system-TOPAS-) seismic records were used to define the morphosedimentary features and investigate the depositional architecture of the Cantabrian continental margin. The outer shelf (down to 180–245 m water depth) displays an intensively eroded seafloor surface that truncates consolidated ancient folded and fractured deposits. Recent deposits are only locally present as lowstand shelf-margin deposits and a transparent drape with bedforms. The continental slope is affected by sedimentary processes that have combined to create the morphosedimentary features seen today. The upper (down to 2000 m water depth) and lower (down to 3700–4600 m water depth) slopes are mostly subject to different types of slope failures, such as slides, mass-transport deposits (a mix of slumping and mass-flows), and turbidity currents. The upper slope is also subject to the action of bottom currents (the Mediterranean Water — MW) that interact with the Le Danois Bank favouring the reworking of the sediment and the sculpting of a contourite system. The continental rise is a bypass region of debris flows and turbidity currents where a complex channel-lobe transition zone (CLTZ) of the Cap Ferret Fan develops.The recent architecture depositional model is complex and results from the remaining structural template and the great variability of interconnected sedimentary systems and processes. This margin can be considered as starved due to the great sediment evacuation over a relatively steep entire depositional profile. Sediment is eroded mostly from the Cantabrian and also the Pyrenees mountains (source) and transported by small stream/river mountains to the sea. It bypasses the continental shelf and when sediment arrives at the slope it is transported through a major submarine drainage system (large submarine valleys and mass-movement processes) down to the continental rise and adjacent Biscay Abyssal Plain (sink). Factors controlling this architecture are tectonism and sediment source/dispersal, which are closely interrelated, whereas sea-level changes and oceanography have played a minor role (on a long-term scale).     

Possibilities of GPS Kinematic Measurements for Geological Survey in East Slovakia

This paper deals with transformation procedures for observed GPS data from the world geodetic system WGS-84 into the national geodetic grid datum S-UTCN(system of united trigonometric cadaster network) and Baa(the Baltic Sea after adjustment).Transformation from WGS-84 into SUTCN is performed most frequently by means of the 7-element Helmert transformation with three identical points.Geodetic network was adjusted by two ways.     

SVLBI用于大地测量的卫星轨道及其跟踪网设计

SVLBI （space very long baseline interferometry） has some important potential applications in geodesy and geodynamics, for which one of the most difficult tasks is to precisely determine the orbit of an SVLBI satellite. This work studies several technologies that will possibly be able to determine the orbit of a space VLBI satellite. Then, according to the types and charac- teristics of the satellite and the requirements for geodetic study and the geometry of the GNSS （GPS, GALILEO） satellite to track the space VLBI satellite, the six Keplerian elements of the SVLBI satellite （TEST-SVLBI） are determined. A program is designed to analyze the coverage area of space of different altitudes by the stations of the network, with which the tracking network of TEST-SVLBI is designed. The efficiency of tracking TEST-SVLBI by the network is studied, and the results are presented.     

Environmental factors influencing aggregation of manta rays (Manta birostris) off the northeastern coast of the Yucatan Peninsula

Manta rays inhabit tropical, subtropical and temperate waters. Aggregation sites of manta rays have been recognized worldwide, but the reasons for this behavior are still poorly understood. This study describes environmental factors influencing aggregation sites of the giant manta ray (Manta birostris) off the northeastern coast of the Yucatan Peninsula. Observations of manta rays were obtained from scientific surveys conducted during 2006–2011. Environmental data were obtained from satellite imagery. The maximum entropy (Maxent) method for habitat modeling was used to determine the effects of environmental conditions on the species and predict suitable habitat for manta rays in this region. Primary productivity and distance to the coast were the most influential variables, suggesting that aggregation occurs in highly productive coastal waters. The distribution of manta rays predicted by the Maxent model showed that the most suitable habitat within the study area is located off the northeastern coast of the Yucatán Peninsula, more precisely, northeast of Isla Holbox and northwest of Isla Contoy. Seasonal patterns of distribution suggest that the most suitable conditions are present from July through September.     

A geologic study of the Juan del Grijalva landslide,the most important mass movement during the last century in Mexico

On November 4th 2007, along the Grijalva River in the state of Chiapas, Mexico, has occurred one of the largest landslides ever known. This landslide, known as Juan del Grijalva, destroyed the town of the same name, killing 20 people, and moved 55 million cubic meters of rock and debris down slope to completely block the Grijalva River. In order to understand the characteristics and factors that triggered the Juan del Grijalva landslide, geologic studies were conducted at the site. The results indicate that the landslide was composed of a lithologic sequence of thin-bedded shales and thin to medium-thick-bedded sandstones. This was faulted into several blocks dipping in the same sense as the mass movement. The main triggering factor was the increment of the pore pressure into the lithologic unit due to water saturation after 5 days of heavy rain before the incident. According to records from the last century, the Juan del Grijalva mass movement represents one of the largest mass movements recorded all over the world. The risk conditions of the area after the landslide lead to the rapid construction of an artificial channel to drain the accumulating mass of water upstream and therefore prevent a future catastrophic inundation down stream.     

Comparison of quantitative petrographic, stable isotope and cathodoluminescence data for fingerprinting Czech marbles

Various marbles from both historic quarries and historical artefacts of the Czech Republic were examined in order to make determinations of their provenance. The methodology used was based upon a combination of petrographic image analysis (PIA) of thin sections, stable isotope geochemistry of carbonates, and cathodoluminescence. Multivariate statistical methods (i.e. cluster analysis and discriminant analysis) confirmed the geoscientific relevance of the marble’s different characteristics with a high degree of consistency as well as the enhanced significance of stable C and O isotopes in correlation with the petrographic data. The qualitative cathodoluminescence data provided a useful additional tool to help recognise the fingerprinting of marbles with similar petrographic and/or geochemical characteristics.